Top Load Tester Dealers

• Power: 220v AC,50Hz
• Country of Origin: India
• Least Count: 0.05kgf( 50 Gm)
• Capacity: Capacity: 250 kgf
• Test Speed: 25+/- 2mm/min
• Speed: 10 to 100 mm/min.
• Indicator: Microprocessor Based LCD Load Indicator
• Vertical Clearance: 600 mm
• Compression Plate Size: Dia 200 Mmm or as per Sample
• Load Units: kg, Nm, Pound
• Paint: Powder Coated

The MultiTest-dV range comprises three outstanding value, superior, motorised force testers. Designed for precision-controlled compression and tension testing, the dV’s simple controls, backed by sophisticated electronics, make it the ideal choice for a wide range of routine testing. Its multifunctional control wheel allows precise setting of speed and position, while its coloured LEDs clearly indicate machine status during testing.

Top Load Tester is designed to provide Compressive buckling load. The instrument is used for testing the load bearing capacity of the PET containers when subject to an extreme load from the Top direction. It determines accurately the maximum load a PET container can bear without any deformation or failure. The performance of containers in production and transportation is a matter of concern for a manufacturer. Product ruptures or failures during shipping, packing, warehousing are very costly to bear. But at the same time, it can be prevented if the finished material is tested under top load test. Presto Top Load Tester provides the digital compressive buckling of the load. It is a fully automatic motorized representation. The Digital display is highly sophisticated and appealing. The testing instrument offered an easy display to read and equipped with Auto TARE set facility and Peak Hold arrangement. The tester meets Indian and international standards. Presto’s digital top load tester Digital model is equipped with inverted concave jaws and a load cell. The load sensor of the load cell can be standardized through in-house calibration. The machine works by placing a test specimen between the jaws for zero slippage. The user switches off the machine to view the effect of buckling in the bottle.     The testing equipment has a capacity of 100Kgf. The machine provides the best results with the accuracy of ± 2% full scale (with master load) The equipment is set on a base plate of rigid metal and finished in Autumn Gray and Blue colored paint with intense chrome plating to provide it a corrosion resistant finish. The instrument is available with calibration certificate along with an instruction manual. Least Count/Resolution: 0.01 Kgf Test Speed: As per Standard Power: 220V, Single phase, 50 Hz Display: Digital Load Monitoring: Peak Load indicator with Digital readout and peak hold feature Safety Switch: Yes

• Type: Top Load Tester
• Certification: CE Certified, ISO 9001:2008
• Color: Blue and Grey
• Warranty: Lifetime Buyback Warranty
• Country of Origin: India

Paramount TOP Load Tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It is a Next Gen. Top Load Tester. It determines the compressive Buckling Load in digital form. In this equipment the Test Sample is placed in the jaws of the machine and constant amount of load is applied to the jaws that compress the bottles in a downward direction. The Load is applied to the bottle until is it deformed and change its shape. The Load is indicated in the Digital form on the Control panel.

• Features: Inverted straight plates for zero slip gripping support, In-house calibration facility, Speed control option, Over travel Protection.

Top - load testing (also known as 'column-crush' and 'axial force resistance') is performed mainly on blow moulded, the reformed or injection moulded plastic containers. It measures the compressive strength of such containers to ensure they do not deform or break when subjected to axial forces during the processes of filling, closure, storage and transport.Registered Design Patent No. 341519-004 Top - load testing (also known as 'column-crush' and 'axial force resistance') is performed mainly on blow moulded, the reformed or injection moulded plastic containers. It measures the compressive strength of such containers to ensure they do not deform or break when subjected to axial forces during the processes of filling, closure, storage and transport.

• Brand Name: Perfect
• Material: MS- Powder coated
• Voltage: 230 V AC
• Display: LED
• Span Height: 400mm
• Speed of compressing: 24mm per minute
• Readability: 0.01 Kgf
• Accuracy: +/- 0.5%

• Size: 16, 20 and 24 inch

The performance of a container in production and transit is critical to the manufacturer. Product failures during filling, packing, warehousing and shipping are costly and can easily be prevented when containers and finished goods are tested for Top-load strength. Top-load strength is an excellent method to optimize the necessary force required to produce deformation and failure of bottles and containers. Top load strength can also identify thinned areas in the wall of the bottle resulting in poor wall-thickness distribution. Model 17-77 Compression Tester meets International Standards and Corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance.

• Power: 220V, Single phase, 50 Hz
• Display:: Digital

Top Load Tester is designed to provide Compressive buckling load. The instrument is used for testing the load bearing capacity of the PET containers when subject to an extreme load from the Top direction. It determines accurately the maximum load a PET container can bear without any deformation or failure. The performance of containers in production and transportation is a matter of concern for a manufacturer. Product ruptures or failures during shipping, packing, warehousing are very costly to bear. But at the same time, it can be prevented if the finished material is tested under top load test. Presto Top Load Tester provides the digital compressive buckling of the load. It is a fully automatic motorized representation. The Digital display is highly sophisticated and appealing. The testing instrument offered an easy display to read and equipped with Auto TARE set facility and Peak Hold arrangement. The tester meets Indian and international standards.

Top load tester digital manufacturers and suppliers have been supplying the best accuracy testing machine for the industries in different verticals for better quality assurance of the products. In the PET and plastic industries, there are different types of bottles and containers manufactured that are further used for packaging of a variety of products such as food products, drinks, industrial chemicals and so forth.

• Color: Yellow
• Packaging Type: Box
• Application: Industrial
• Type Of Testing Machines: Powder Dynamometer
• Test Voltage: 500V, 1000V
• Range: .5KV-1KV-2.5kV - 20G. OHMS
• Features: Low battery consumption,Low battery indicator,Overload protection,Auto-off.

• Display Type: Digital
• Brand Name: Testronix
• Country of Origin: Made in India
• Color: Grey and White
• Power Supply: Power: 220V, Single phase, 50 Hz
• Memory: Peak Load Hold Facility (save in memory)
• Diameter: Compression plate diameter- 180 mm +- 5mm
• Size: 635 x 583 x1161mm

• Material: Ms powder coated
• Color: Grey and Blue
• Brand Name: Animatex
• Power: 220V, Single phase, 50 Hz
• Weight: Light in Weight
• Condition: New

Manufacturers & Exporters of PET Bottle and Jar Top Load Tester Top Load Test is a test carried out to measure the maximum load at which the buckling of PET bottles, Plastic Containers, Buckets etc. happens. Top Load Test is a measurement of ability of material to withstand forces that tend to pressure applied and to determine to what extent the material withstands pressure before buckling occurs. Specification : Load Capacity : 500 Kg.(Resolution 0.1 Kg) Compression Through : 2 Nos. 400mm x 200mm x 12mm thick plates Maximum distance between Two Plates : 350 mm or as per your requirements. Speed : Variable with AC frequency drive with geared motor. Height : Adjustable As Per Sample. Paint : Powder Coating. Power : 230V Ac, 1 Phase, 50 HZ. Microprocessor based load indicator: Accuracy of ±0.05% of load indicated Newton or Kg. can be selected. Load cell I/P – one

• Brand Name: KMI
• Material: ALL
• Color: White
• Display Type: Analogue
• Application: Tensile testing
• Specifications: Electronic load & elongation measurement,Digital indication for breaking load & elongation,With computer hookup facility,Load-elongation curve & test report printing facility by electronic printer
• Advantages: Digital display on screen for Load & Elongation,thus eliminating human or parallax errors in reading
• Accuracy: +/- 1%
• Load Capacity: UP to 50KN
• Capacity: Upto 250 kgf
• Resolution: 2000 counts for each measuring range
•  :  

• Brand Name: Akshar Electronics
• Material: MS
• Packaging Type: Wooden box
• Frequency: 50 - 60 Hz
• Accuracy: +/- 0.5%
• Surface Finish: Color Coated

• Brand Name: Techplast
• Material: MS
• Color: White
• Country of Origin: Made in India
• Voltage: 230 V
• Controller: Microprocessor Based
• Frequency: 50 Hz
• Finish: Powder Coated