Torque Controller Dealers

We are offering torque controller. Features of tcw-09-pc torque controller fully solid state design - no moving parts - no wear and tear of parts - no noise - consequently long life. uses one main circuit board for easy maintenance. accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases. connected drive is automatically recognised and indicated by means of led on the torque controller. trip time adjustable from ( 0 sec to 10 secs.). adjustable reverse time from ( 0 sec to 90 secs.). drive toque adjustable in reverse rotation with surface to set torque. hand (trigger) mode or foot switch mode, both are available. expansions can be carried out either in single cycle mode or auto repeat mode. automatic indication on the display for controllers tripping due to voltage or current fault. electronic over current protections incorporated for all four drives. over voltage protection at 275 volts and under voltage protection at 180 volts.

• Warranty: 1 Year
• Power: 1-3kw
• Display Type: Digital
• Automatic Grade: Automatic
• Driven: Electric
• Material: Metal

Based in Mumbai, Maharashtra, India, we are the well-known Manufacturer and Supplier of Digital Torque Controller (DTA 15). Our team of dexterous professionals fabricates the Digital Torque Controller (DTA 15) using top notch quality basic material like iron, steel, etc. and the latest technology. Owing to its attributes like rugged construction, longer service life, clear & bright digital display and emergency reverse switch, our Torque Controller (DTA 15) is extensively demanded. For economical prices, contact us.   Details : Fully solid state with digital display No moving parts like relay or contactor So less wear and tear and long life. Working satisfactory in market since last 10 years with very successful market report Superior SCR technology used over triacs for controlling the high voltage drives Rugged and sturdy construction for harsh on site condition All operation indicated with the glow of LED indicators Separate emergency reverse switch provided Arrangement for connecting optional footswitch MCB provided for electrical safety which protect the operators in case of any short circuit

• Power Source: Electric
• Warranty: 1year

We are offering 3-phase torque motor controller unit employed a solid state circuit. This solid state control circuit without relay provides high reliability as well as long and maintenance free service. The torque controller unit provides adjustable output ac voltage approximately 0 to 220Vac for each phase, hence the torque or the speed of motor can be adjusted. Torque motor controller mainly consists of 3 phase ONOFF switch, AC ammeter, potentiometer and control card.

We offer superior quality of Torque motor controller to our clients.  

• Application: MOTOR SPEED CONTROL
• Phase: SINGLE PHASE
• MODEL NUMBER: TDA-52
• WATT: 60 / 120 / 180 / 300 / 400 WATTS
• INPUT VOLTAGE: 220 VAC
• BODY COLOR: WHITE

US-52AModel : US-52; US-52A Corotation/ Reverse Option, connect CW and COM is corotation, Connect CW and CCW is option. Red LED indicator, 6 terminals,on/ off switch for controlling, the knob switch for adjust the speed. Used for Machine Tools, Textile Machinery, Conveying Machine, Printing Mechanism,Food Machinery,Vending Machine, Packing Machinery, Gumming Machine, etc Model: US-52 Material : PVC Rated Value : AC 220VConnector Type : 6 PinsSpeed range - 9 - 1400r/ min 50hz                          9 - 1600r/min 60HzPower : 60 WATT / 90 WATT / 120 WATT / 180 WATTCable Length : 60cm

Torque Controller Cable Reeling Drums are used for Heavy duty cables and where Cable length is more. i.e Gantry Cranes.

We are providing various types of Torque Controller, We are Specialized for Torque Controller of industrial and plant machinery.

• Country of Origin: Made in India
• Body Material: Stainless Steel
• Brand Name: BHARTIYA
• Model Name/Number: TCW-09-230 & TCW-09-110
• Automation Grade: Automatic

Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life. Uses one main circuit board for easy maintenance. Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases. Connected drive is automatically recognised and indicated by means of LED on the torque controller. Trip time adjustable from ( 0 sec to 10 secs.). Adjustable reverse time from ( 0 sec to 90 secs.). Drive toque adjustable in reverse rotation with surface to set torque. Hand (trigger) mode or foot switch mode, both are available. Expansions can be carried out either in single cycle mode or auto repeat mode. Automatic indication on the display for controllers tripping due to voltage or current fault. Electronic over current protections incorporated for all four drives. Over voltage protection at 275 volts and Under Voltage protection at 180 volts. Supply voltage value displayed during pause time of every auto cycle. Drive current indication given during manual reverse operation. The no. of expansions are stored in the memory and displayed on the panel display at power ON and also whenever the panel is idle. Trip valves are stored in memory after expansion and can be reviewed any time. The trip values can be transferred to PC (Computer) using a single key HANDSET. Using specially developed software, the DATA can be analyzed in statistical terms. It also plots a histogram of No. of tubes verses percentage over-expansions. The Minimum and Maximum supply voltage values observed in the period after last memory RESET, are also displayed. Power consumption of control circuit reduced to 50% which leads to enhanced panel life. Single key HANDSET makes it very easy for the operator to transfer DATA to the computer.

• Voltage Single Phase 50/60 Hz: 110 V
• Weight (kg): 7.5

Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life. Uses one main circuit board for easy maintenance. Uses the latest micro-controller chip for control functions. Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases. Connected drive is automatically recognised and indicated by means of LED on the torque controller. Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused. Actual drive wattage (torque) is displayed. Set wattage (torque), drive current and line voltage can be seen by press of a button.

For AC/DC motor 0.5 HP to 20HP torque and power controlling.  Torque / Power setting by multiturn potentiometer with dial indication.  ON / Off type relay output for control.  Single Phase And Three Phase Thyristorised Speed Controller For DC Motors.

• Brand Name: Niksu
• Voltage: 440 V AC
• Country of Origin: Made in India
• Phase: Three Phase
• Usage/Application: Industrial
• Current: 2 A
• Material: Mild Steel
• Flash Memory: 64 Kb

• Type: Torque Motor Controller
• Certification: Ce Certified
• Voltage: 415 Volt.
• Frequency: 50hz
• Power: 1-3kw
• Power Source: Electric
• Phase: Three Phase
• Warranty: 1year
• Product: Gray

We are manufacturer of all type of Electric Controll Panel.Otherwise we make customize panel as per customer.we are in the market last 27 year, we make single phase DC Motor and Dc Control Panel.We located in Delhi at Bawana Industrial Area, Sector -1, Plot No C-189,  We can Provide you all type of Automation Panel and Dc Motor 

• Type: Automatic
• Voltage: 230 V
• Frequency: 50/60 Hz
• Usage: Tube Expansion of Heat Exchanger Tubes
• Weight: 7.5 Kg
• Trip Time Adjustment: 2 - 10 Sec
• Flash Memory: 64 Kb
• RAM: 1 Kb Built in

Tcw Series Torque Controller, Offered By Us, is a Cheaper Alternate to the Ph-2000 Series But Has Features like a 'slow Start' for the Drives and Automatic Setting of Max Trip Values for Each Drive.

• Brand Name: ACPL
• Type: Automatic
• Country of Origin: Made in India
• Features: Digital voltmeter / ammeter, Compact and durable than dimmer drive, Cost effective.
• Applications: Plastic Extrusion Plants, Lamination machines, Cheese winders.
• Model Name/Number: ACPL
• Usage/Application: Industrial
• Current: 4-40A
• Digit Display Size: Single Display
• Speed Range (%): 0 to 100
• Display: Digital

• Type: Controller
• Certification: Ce Certified
• Color: Multi Colour
• Frequency: 15hz, 50hz
• Body Material: ABS
• Power: 1-3kw, 3-6kw
• Power Source: Electric
• Phase: Double Phase, Single Phase
• Warranty: 1year
• Applications: For 3-Phase A.C motor Torque control

• Voltage: 440V AC
• Phase: Triple Phase
• Features: Single Pot Control Instead Of Triple Pot,Power On/ Off Switch For Unit, Ideal For Centre Shaft Winders.
• Digital Display of motor current: 2 digit including decimal
• Output Current: 5 AMPS maximum
• Output Voltage: 0-400 V AC Variable by pot
• Mounting Type: Panel Mount
• Current: 5 Amp. Max
• Usage/Application: Center Shaft Winding for Plastic Films.
• Features: Digital Display is provided to indicate actual motor current.