Touch Sensor Dealers

• Resolution: 30” to 50” <3mm, 55” and above <5mm
• Sensor:: Detection method
• Projected Capacitance: Construction
• PET film with embedded micro-fine sensing array: Electronics
• Detachable USB controller: Size range
• 10” to 82”: Environment:
• Operating temperature: -20°C > +60°C
• Operating humidity: 90%RH @ 40°C
• Storage temperature: -30°C > +70°C
• Storage humidity: 90%RH @ 40°C
• Resistance to contamination: Determined by mounting substrate
• (from operation side):  
• Water resistance: Determined by mounting substrate
• (from operation side):  
• Mechanical:: Immunity to damage
• Protected by mounting substrate / no moving parts: Sensor thickness
• projection material selected: Stylus type
• Finger, gloved hand: Operating force
• <0.1g: Sensor MTBF
• No moving parts / no known wear out mechanism: Controller:
• Power requirements: Power from USB port (5V±5%, less than 100mA)
• Regulatory: Controller compliant with CE and UL
• EMC: FCC, CE
• Positional accuracy: <1.5% of diagonal error within the recommended viewing
• Sensitivity: Adjustable in software. Maximum thickness of glass mounting
•  : substrate 12mm (single layer – no double glazing)
• Calibration drift: One time calibration, no drift
• Functionality: Mouse move only, activate on touch, activate on release, drag
•  : and drop, touch / hold / release
• Connectivity: USB V1.1, compatible with USB V2.0 (3m standard cable
•  : length, 5m maximum cable length recommended with USB)
• Software: Windows 2000 / Windows XP

• Feature: Touch Control Sensor Switch works on 12V., Color LED can be made ON-OFF just by a single touch.
• Model Number: TTP224
• Sensitivity: Finger Touch
• Interface: Blue OFF, Red ON
• Input Voltage: 12v
• Channels: 2

Accuracy of zero point is within 0.003mm, R.P.M. within 450-600, Max. flange can be clear your sight sense, MIN.(4mm) can be test mini hole for your work piece.

• Color: Black
• Condition: New
• Application: Industrial Use
• Certification: As per industry standards
• Display Type: Analogue
• Type: 3d Touch Probe, Sensors
• Accuracy: 1-2 Micron
• Country of Origin: India
• Storage Temperature: 0 To 60 Deg C
• Service Type: 3D Touch Probe
• Usage: Tool Setting & measurement on CNC machine
• Usage: Breakage detection
• Usage: Tools wear compensation
• Benefit: Auto tool Offset
• Usage: Thermal growth compensation

• Concentricity: 0.01 mm
• Repeatability: 0.005 mm
• Single Gross Weight: 0.4 kg
• Diameter: 20 mm

• Color: Red

Input Voltage : 2 Volt - 5.5 Volts DC. Sensitivity can adjust by the capacitance(0~50pF). Have an external power-on reset pin(RST pin). After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled. The re-calibration period is about 4.0 sec when the key has not to be touched.    

Auto Touch Sensor for fingerprint only identification Dual Function for Access Control and Time and Attendance System. 1,00020004000 Fingerprint users2000 Event Buffers Three Level Security: RF only Fingerprint Only RF + Fingerprint Fingerprint Templates upDownload via laptop It can be connected to NETWORK via RS232RS422RS485 High Quality Optical Sensor

• Size: 24 x 24 x 7.2 mm
• Features: Low power consumption,Power supply for 2
• Power supply voltage(VCC): 2.0, 3, 5.5 V.
• Output high VOH: 0.8VCC V
• Output low VOL: 0.3VCC V
• Response time (touch mode): 60 mS
• Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V): 8 mA
• Output pin pull-up current (@ VCC = 3V, VOH = 2.4V): 4 mA
• Response time (low power mode): 220 mS

• Ball diameter: 5mm,6mm, 8mm
• Usage: Position Sensor
• Material: Stainless Steel
• Minimum Order Quantity: 1 Number

• Application: Industrial
• Color: Silver
• Frequency: 43-60Hz
• Material: Aluminium
• Switching Current: 6.5A
• Is It Portable: Portable
• I Deal In: New Only

The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the modules output is low, lower power consumption; When a finger touches the corresponding position, the modules output is high, if not touched for 12 seconds, it switches to low-power mode. Jog type : the initial state is lower , higher touch , do not touch is lower ( similar touch of a button feature ) This Module can be installed in such as surface plastic, glass of non-metallic materials.In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons.

• Type: Sensor
• Material: SS
• Accuracy: Within 0.005mm
• Purpose: Position Sensor
• Minimum Order Quantity: 1 Piece

we are offering PT-TOUCH SENSOR.

• Voltage: 2 - 5 v
• Packaging Type: Box
• Response Time: 60 ms Maximum
• Board Material: PCB
• Power Indicator: LED Type

• Voltage: 220 V
• Frequency: 50 Hz
• Application: Gaming controllers, Home entertainment, Home appliances, Cellular handsets, Portable media devices
• Sensor Type: Touch
• Material: ABS
• Shape: Rectangular
• Advantages: Mechanical button and switch replacement on a wide variety of applications, Provides more intuitive user interfaces, Increases reliability without moving parts, Allows greater design freedom, Provides a more contemporary look, Reduces overall system cost

Developed Five-Wire technology with the harshest environments in mind, so it's no wonder that it excels in reliability, durability, and expected product life. Impervious to environmental conditions such as liquid spills and splashes, humidity, and washdown, these screens are the most contamination-resistant available. They deliver drift-free operation for a lifetime of 35 million finger touches.

• Country of Origin: India
• Certification: ISI Certified, ISO 9001:2008 Certified
• Color: Black, Brown, Creamy, Dark Brown, Grey, Ivory, Light Grey, Off White, White
• Warranty: 1 Year, 2 Year, 5 Year
• Surface Treatment: Powder Coated, Polished, Non Polished
• Condition: New, Used
• Corrosion Resistance: Yes, No
• Specialities: Durable, Extra Stronger, Fine Finished, High Durability, Long Life, Perfect Finish, Robustness, Superior Quality