Trailer Pump Dealers

Stationed in Ahmedabad(India), our company is one of the most sought after entity in the industry. Our online validation transactions are supported for Electronic Funds Transfer ensuring complete security of the payments. We also undertake offline payment methods such as bank account transfer, cash payment, etc. We make available, 1800 LPM Portable Trailer Pump, which is tested on various parameters before the final delivery.

• Brand Name: Firefly/Kirloskar
• Max Flow Rate: 6000LPM
• Material: CI/Aluminium
• Automation Grade: Semi-Automatic
• Head: 7 kg
• Discharge: Upto 6000LPM
• Engine Capacity: 50bhp onwards

• Weight: Not More Than 900 Kg
• Brand Name: Firefly
• Model: MFT-1800-D
• Pump Type: Single stage centrifugal fire pump
• Rated Performances: 1600-1800 LPM at 7 bar I Maximum Flow - 2400 LPM
• Engine: 4 cylinder 4 stroke naturally aspirated water cooled diesel engin
• Fuel Tank Capacity: 65 litres sufficient to run at rated capacity for not less than 4.5 hours
• Suction Inlet: 100 mm single inlet with British standard round threads
• Delivery Outlet: 2 delivery outlets fitted with 63 mm instantaneous couplings
• Dimensions (L x W xH): L - 2800 mm x W - 1600 mm x H - 1500 mm

• I Deal In: Second Hand Only
• Brand/Make: Putzmeister
• Model Name/Number: BSA1407

• Engine Rating: 35 KW
• Nominal Speed: Up to 2300 RPM
• Pumping Cylinder: Up to 180 mm
• Pumping Cylinder Stroke: Up to 1000 mm
• Stroke: Up to 24 counts per min
• Theoretical Output: Up to 36 cubic meters per hour
• Concrete Pressure: Up to 65 bar

SANY concrete trailer pump is manufactured by electric, diesel and ultra-high pressure for your use on sites.

• Country of Origin: Made in India
• Power: 100 HP
• Model Name/Number: SP 1400
• Brand: Schwing
• Capacity: 1.5 Ton
• Automation Grade: Semi-Automatic
• Speed: 11p RPM

Concrete Trailer Pumps  - SP 3000 / SP 3500 / SP 4507 / SP 4800 / SP 8800    SCHWING portable concrete pumps are successfully deployed worldwide,whenever vast quantities of concrete have to be pumped over exceptionally long horizontal and vertical distances.In building and civil engineering projects, they are also fast, reliable and economically efficient in handling pumpable concrete under extreme conditions with regard to concrete designs, job sites and climate. When you want to go to the top, choose the pumps that have already been there - the range of heavy duty pumps manufactured by SCHWING are the perfect solutions for high power pumping. Pumps like SP 3000, SP 3600, SP 4800 and SP 8800 are the high pressure workhorse pumps that have topped out more high rise buildings than any other. Rock Valve Rock valve with reinforced axial bearing of the slewing shaft and additional slewing cylinder for valve switchover, designed for exceptionally tough usage. Extension units can be added to the feeding hopper (shown here without rubber border) to customer specifications. Transport lifting eyes are welded to the top of the support structure and integrated into the housing. The heart of the concrete pump is the Rock valve, patented in almost all industrialized countries and offering exemplary pumping characteristics, wearing properties and operational safety.  Gear Box for Agitator Motor When everything else is getting stronger, the agitator has to follow suit. The high torque of the agitator drive rotates the agitator paddles untiringly, even with very coarse concrete. Control Block The concrete pump assembly is safely housed between the sturdy longitudinal girders of the welded base frame. Yet the control block is readily accessible ( e.g. for reconnection to rod side or piston side). Schwing SP 8800 The epitome of concrete pumps, the Schwing SP 8800 is the most powerful pump in the world. The choice wherever concrete has to be pumped to record breaking heights. This pump has the Rock Valve and open hydraulics as all Schwing pumps. The Schwing philosophy of green pumping is built into this pump and it is designed to use the minimum amount of fuel for it's operation ensuring a healthy economy as well as a healthy environment. Also the noise shielding features ensure that the pump noise is reduced. The ergonomic control panel displays all operating data and the intuitive interface enables the operates to learn using the pump quickly. Another advantage of using Schwing is the experience we have for the past 83 years in concreting. Also our extensive network of branches,spares stores and engineer locations ensure that you have the best expertise to support you always.

• Capacity: 1800 LPM, 2400 LPM, 3000 LPM

Skids for slide in units for Pickup trucks as well as Stand Alone units available. These systems are best in remote areas where water resource is available but a hydrant network is not available. Diesel Engine Driven, Available in Skid, Slide-In or Trailer Versions, Engine Options include Cummins Ashok Leyland Tata,For continuous duty application, Can be used for Fire Fighting as well as De-watering.

  As per IS944   Diesel Engine operated Pump   Diesel Engine 4 Stroke, Multi- cylinder, Air cool   Inlet 4” BSRT male threads   Outlet 2 nos 2½”Female Instantaneous Swivel   Starting Battery Starting

• Weight: 4160 kg
• Filling Height: 1400 mm
• Usage/Application: Buildings
• Hopper Capacity: 500 L
• Model Name/Number: HBT50.10.48RS
• Concrete Cylinder: 180x1250 mm
• Capacity: 4 Cylinder
• Engine Power: 48.5 kW
• Max Aggregate Diameter: 50 mm (Pebble), 40 mm (Crushed Stone)
• Max Theoretical Output: 55/30 m3/h
• Max Theoretical Concrete Output Pressure: 50/100 bar
• Strokes: 28/15 per minute

Single stage centrifugal pump is directly coupled with a suitable engine and mounted on a trailer for surface transportation. The Pump is equipped with Exhaust priming system as standard for fast & effective priming from deep lift. However Firefly’s reciprocating priming system "Primatic" which is completely automatic in operation can also be supplied with these pumps as optional. The engine is air cooled as well as water cooled for better performance. The complete set up is equipped with radiator, heat exchanger, battery, electric starter, 40 liters diesel tank, control panel etc. This unit can be used to combat fire for longer times.

The motor (Diesel or Electric) drives the axial piston pump via a flexible coupling. Due to automatic output adjustment optimum utilization of the motor power, resulting in low energy consumption at differing   pumping condition. Additionally, the concrete flow can be manually adjusted. The pump operates in a proven open circuit.The maximum   placing output   and the pressure   are determined by the construction sites. Between these two values, automatic adjustment  by the governor occurs maintaining a  constant output depending on the  power available from the installed drive motor.The portable concrete pumps are assembled in the unit construction system.  The main assembly groups are Frame, Power unit, Concrete pump kit, Control block, Hydraulic tank and Hopper with agitator. The Frame & Axle  The frame, in compact execution, is constructed from standard vehicle profiles. The pump is mounted on heavy duty single axle chassis with draw bar, pneumatic tyres and for travelling on construction sites at up to 25 km/hr. Control System  The fully hydraulic control system is integrated within the drive. The compact control block and minimal hydraulic lines makes the equipment reliable and durable. The differential cylinder has trouble free piston rings and automatic constant stroke maintenance. Both gate valves change independently so that even when full change over is prevented by foreign material or similar obstructions  in the concrete, the pump continues to operate without problems. All components are especially developed and manufactured to withstand the rough treatment on construction sites. Control Housing Ideal flow conditions in the control housing resulting in superior placing proper ties also incase of concrete low on sand and fines, stiff consistence or crushed aggregates. Simple tilting of the output pipes enables easy control and cleaning of the concrete conveying path and the gate valve parts. Pumping Material Pumpable concrete, within any consistency range down to a water cement ratio of 0.4. Even concrete with aggregate grading up to 40mm can be conveyed  trouble  free with the concrete  pump through a 125mm diameter pipe line.   Flat gate valve The  two flat gate  valves working   independently  have  been especially developed for pumping concrete. Their working system with automatic adjustment permits trouble free pumping even with badly worn parts. Integrated Control Block  The hydraulic control system is integrated with in the drive. The compact  control  block  & minimal  hydraulic  lines makes  the equipment reliable & durable.

The motor (Diesel or Electric) drives the axial piston pump via a flexible coupling. Due to automatic output adjustment optimum utilization of the motor power, resulting in low energy consumption at differing   pumping condition. Additionally, the concrete flow can be manually adjusted. The pump operates in a proven open circuit.The maximum   placing output   and the pressure   are determined by the construction sites. Between these two values, automatic adjustment  by the governor occurs maintaining a  constant output depending on the  power available from the installed drive motor. Design The portable concrete pumps are assembled in the unit construction system.  The main assembly groups are Frame, Power unit, Concrete pump kit, Control block, Hydraulic tank and Hopper with agitator. The Frame & Axle  The frame, in compact execution, is constructed from standard vehicle profiles. The pump is mounted on heavy duty single axle chassis with draw bar, pneumatic tyres and for travelling on construction sites at up to 25 km/hr. Control System  The fully hydraulic control system is integrated within the drive. The compact control block and minimal hydraulic lines makes the equipment reliable and durable. The differential cylinder has trouble free piston rings and automatic constant stroke maintenance. Both gate valves change independently so that even when full change over is prevented by foreign material or similar obstructions  in the concrete, the pump continues to operate without problems. All components are especially developed and manufactured to withstand the rough treatment on construction sites.

The motor (Diesel or Electric) drives the axial piston pump via a flexible coupling. Due to automatic output adjustment optimum utilization of the motor power, resulting in low energy consumption at differing pumping condition. Additionally, the concrete flow can be manually adjusted. The pump operates in a proven open circuit. The maximum placing output and the pressure are determined by the construction sites. Between these two values, automatic adjustment by the governor occurs maintaining a constant output depending on the power available from the installed drive motor.

Trailer Firefighting pump unit, 1800 lpm capacity @ 7.0 kgfcm2, consisting of TATAMahindra (or equivalent), 60 HP Diesel engine, 2200 rpm, Water cooled. Engine coupled with corrosion resistant Bronze centrifugal pump, provided with an exhaust ejector primer

• Type: Trailer Pump
• Certification: ISO 9001:2008 Certified
• Feature: Works In All Condition
• Fuel: Diesel
• Condition: New
• Automatic Grade: Manual
• Power: 50-100Bhp
• Warranty: 1year
• RPM: 2000-4000Rpm
• Country of Origin: India

• Features: Rust proof, Longer service life, Precise design.

KEERTHI PUMPS are designed special for portable application, Fully automatic priming systems allow the pump prime and re-prime while running, Vacuum pump driven by common prime mover through belt drive arrangement, Fully guarded coupling, pulley and belting, All pumps are fitted with Mechanical seal, Highway trailer with 150 litre integral fuel cell chassis is standard, Rugged lifting bale for easy, balanced hoisting is standard for all models.