Submersible Pressure Transducer
7,000 Per Units
10 Piece (MOQ)
Submersible Level Transmitter measures static pressure of the liquid proportional to the level depth using highperformance piezoresistive silicon chip as the measuring element. The result is converted to standard current or voltagesignal output through signal conditioning circuit, establishing the linear corresponding relation between the output signaland liquid depth to complete the measurement of the liquid depth. The product has advantages of high precision andsmall volume. Submerse it directly into liquid, the height between the end of the transmitter to the liquid level ismeasured easily. The product has passed long-term aging and stability screening with stable and reliable performanceand can be used in harsh outdoor environment. It is applicable to the measurement and control of the liquid level in thepetroleum, chemical industry, power plant, urban water supply and hydrological exploration fields.
DAIH Melt Pressure Transducer
Get Price Quote
The DAIH "Heavy Duty" sensor incorporates all the features of the DAI Melt Pressure Transmitter range but features an extremely heavy duty sensor tip for highly abrasive media. This sensor is characterised by particularly good resistance where polymers with for example a high level of abrasive filler and high viscosities are processed. Interference resistant signals over long distances Stable output signals No damage due to incorrect wiring configurations 3- and 4-wire technology available at no additional charge Applications with process medias of up to 400°C (750°F) possible Standard G-coating to counteract adhesive materials Maximum reliability through new membrane technology Gneuss special diaphragm surface treatment (standard) against sticky media Diaphragm recessed by 0.5 mm Reinforced diaphragm Measurement diaphragm specified for 200 % of measurement range
Best Deals from Transducer
LVDT Sensor
Get Price Quote
10 Piece (MOQ)
German Jet Position Transducer
40,000 - 44,000 Per Piece
1 Piece (MOQ)
Honeywell Precision Pressure Transducer
Get Price Quote
Platinum Rhodium Thermoelectric Transducers
Get Price Quote
1 Kilogram (MOQ)
Temperature transducers TPP 10-E, TPP 13-E,TPR –E (hereinafter referred to as temperature transducers) are intended for measuring temperature in the oxidizing and neutral gas medium, which do not contain substances interacting with materials of temperature transducers, and in the capacity of the removable sensors of temperature transducers and protection fitting. PtRh/ PtRh and PtRh / Pt sensors are used in the measuring parts
MLS 01 Magnetic Linear Encoder
Get Price Quote
This Magnetic Linear Encoder (MLS 01) is suited for measuring linear displacements that occur on automation systems and industrial machinery. Having high accuracy and exceptional resistance to humidity, this Magnetic Linear Encoder is manufactured using advanced technology. The sturdy metal case and shielded metal enclose of this Magnetic Linear Encoder make it durable. Specialty : Best technology in compact size Easy to mount by gluing Contact-less and wear free system High resistance to vibrations and knocks Reliable reading transducer Single processing as standard with encoders
Immersible transducer
130,000 Per Piece
Ultrasonic Immersible Transducer
Get Price Quote
1 Piece (MOQ)
EI28 10P Horizontal Linear Transformer
60 - 70 Per Piece
1000 Piece (MOQ)
Notes RoHS 3 compliance is available on most products, subject to our confirmation. Specifications subject to change without notice.
Keller Isolated Pressure Transducer
15,000 Per piece
10 Piece (MOQ)
Temperature Transducers
Get Price Quote
displacement transducer
8,500 Per Piece
1 Piece (MOQ)
0.0
Website
Series 672 Low Pressure Transducer
7,500 Per Piece
Displacement Indicator
Get Price Quote
Our assurance towards providing damage-free products to the clients is achieved through our use of quality packing material. In addition, we maintain streamlined packaging system supervised by experts. In order to keep our offerings in safe and secure conditions, we have developed a storage unit and keep it updated with the defined industry standards.
I/P Converter
3,000 Per Piece
MYKO 500 MK Series transducers are ideally used to convert current or voltage input signal to a nearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, for standard process control applications which typically utilise 3 to 15psig output and industrial & high pressure application which typically utilise pressure output up to 120 psig.MYKO 500MK Series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of CMRI and ATEX* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier.Principle of OperationMYKO 500 MK Series transducer is a force balance device in which, when electrical current is passed through the coil of transducer magnetic field is created which acts on the magnet assembly, casuing the anvi & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.The flapper/anvil move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases (or decreases for reverse acting) causes proportional output pressure increases.Zero and Span are calibrated by turning easily accessible adjusting screws on the front face of the unit. The zero adhusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in series with the coil provides temperature compensation.Integrated Characteristics Compact Design. Low Air Consumption. Integral Volume Booster-flow capacity up to 20 SCFM is boosted by the built in Volume booster. Field Reversible – Output provides inversely proportional to input signal. Flexible Adjustments of Zero & Span. Standard Process Inputs. Split Ranging NEMA 4X (Ip65) Enclosure - Optional Applications500MK Series transducers converts electrical signal to a pneumatic output which can be used to operate the fallowings : Valve, Valve-Actuators, Damper and Louver Actuators Valve Positioners Air-Cylinders Relays Clutches Web Tensioners and Brakes Used in : Petrochemical Processing Systems Energy Management HVAC Systems Textile Processing Systems Pharmaceutical Processing System Clutches Pulp and Paper Handling Controls
Torque Measurement Transducers
Get Price Quote
We have earned a good name as a trusted Manufacturer and Supplier of an extensive range of reliable Torque Measurement Transducers. Made in compliance with all defined quality standards, Torque Measurement Transducers works efficiently, are corrosion resistant and have long service life. We make available Torque Measurement Transducers at competitive prices. With our highly efficient team members, we have gained the trust of our clients for delivering all orders on time.
Ion selective electrodes
Get Price Quote
Combination ion selective electrodes these electrodes can be used with any conventional laboratory or hand held ph meter with a millivolt mode. Cable length can be specified at the time of ordering. Maximum length is 10 metres. Standard products are fitted with 1 meter of cable terminated with a bnc connector. Dimensions are: 120x12mm. Main features and benefits include: no reference electrode needed available in fully submersible and water proof format solid state sensors ideal for unskilled operatives no filling solution required virtually unbreakable can be left dry for long periods long lifetime
ANGULAR DISPLACEMENT USING CAPACITIVE TRANSDUCER (VPL-TT-CPT)
Get Price Quote
Measurement System : a] Gang with a calibrated dial mounted on its shaft. b] Transducer with electronics Instrumentation.
Magnetic Linear Encoder
Get Price Quote
We are offering magnetic linear encoder. The magnetic linear encoder (mls-2) offered by us features a shielded metal enclosure and contact-less and wear free system, which is easy to mount. Offering the most advanced technology in a compact dimension, the magnetic linear encoder (mls-2) has a reliable reading transducer that enhances its performance. special features measuring length : up to 100mconnection cable : up to 20m high resolution up to 0.001 mmprotection class ip67use with mls 1 sensor headtape in flat and rugged aluminium profilestainless steel cover protecthigh vibration and knock resistanceresistant to humidityhighly accurate
Cities
Post Free Ad