Tube Tester Dealers

• Country of Origin: Made in India
• Capacity: 1000 Kg
• Accuracy Grade: 0.5
• Power Source: Electric
• Voltage: 220-250V

The Benz Pipe Burst Tester tests pipe, tube and hose from 18" to 12.0", measuring burst pressure up to 3000 psi. Custom burst pipe testers can measure higher pressures and larger diameter samples.The Benz Pipe Burst Tester is unique, with a push-button, dial-in control panel and a dedicated microprocessor controller designed specifically for testing pipe, tube and hose.

A simple test instrument used by manufacturers and used to identify leaky tubes in condensers, heat exchangers and other tubular apparatus.   The Vacuum Tube Leak Tester PVLD-3000 is a simple and precise tool used for testing tubes of boilers, condensers and heat exchangers. It is the fastest and most accurate method of locating leaky tubes for plugging or replacement or installation of new tubes.   It works on the principle of vacuum in which the tool sucks the air from the tube and creates a vacuum to a desired reading on gauge. Steady reading on gauge indicates NO LEAK. If the reading on the gauge drops it indicates a tube with a LEAK.   Features of Vaccume Tube Leak Tester Only one tool necessary for testing multiple tube sizes. Built-in easy to read vacuum gauge. Multifiled exhaust for quiet operation. Lightweight and easy to use.

Highly appreciated for its accurate readings, our Pluri Tube Bursting Strength Tester are designed and manufactured in sync with set industrial norms. We are an eminent Manufacturer and Supplier of Pluri Tube Bursting Strength Tester from Delhi. Our Pluri Tube Bursting Strength Tester undergo strict quality-tests before the final dispatch. Courtesy our brilliant logistics network, we can deliver bulk orders of the Pluri Tube Bursting Strength Tester within the promised timeframe.

• Brand Name: Premier Enterprises
• Frequency: 50 Hz
• Country of Origin: Made in India
• Display Type: Digital
• Voltage: 220 V
• Phase: Single Phase
• Material: Mild Steel

We are engaged in manufacturing and supplying a wide range of Tube Bursting Strength Tester. It is available in both digital tester and analogue types. Pouch bursting strength digital tester and bursting strength digital tester are used for paper & board, standard deluxe & super deluxe models. Manufactured from quality tested components, these are in high demand by our clients spread worldwide. We also meet customized requirement for our clients benefit. Features Fine finishStrong and sturdyMultiple usesReasonable prices

• Power Source: Electric
• Material: MS
• Usage/Application: Industrial
• Automation Grade: Automatic

If the gd is not proper then exchange line cards can not be protected from surge voltages. This is a specialized machine for testing pouyet krone e10b ipm g.d. Tube.

• Temperature range: 200-350 degree C
• Precision of temperature control: Plus/minus 1 degree C
• Sample oil feeding rate: 0.31 ml/hour for 16 hrs. continuous operation
• Delivery system of compressed air: his device makes 10 ml/min flow rate possible from compressed air supplied.
• Dimensions: 750 mm(W) x 600 mm(L) x 785 mm(H)
• Net Weight: 75 kg
• Electricity: AC 100 V 50/60 Hz 15 A For other voltage, voltage step-down transformer is needed

• Features: Hassle free working, Noise free operation, High accuracy & efficiency
• Application: TUBE TESTING SYSTEM
• Display Type: Digital
• Grade: Semi-Automatic

We are offering laboratory davis tube tester. Laboratory davis tube tester the davis magnetic tube tester consists of an extremely powerful electromagnet which can generate a magnetic field intensity of up to 4,000 gauss, a glass separation tube and a motor driven agitation mechanism. the tube is positioned between the poles of the magnet at an angle of approximately 45 degrees (the angle is adjustable). during the operation of a small electric motor drives the agitating mechanism that supports the water filled glass tube. the tube moves forward and backward while it rotates simultaneously. Any magnetic particles present in the product sample inside the tube are collected in the zone of intense magnetism. A vigorous washing action by agitation is applied to these magnetic particles. Eventually all nonmagnetic particles are flushed from the tube. a clean concentrate of magnetic particles is then available for determining percent.

A very useful joint testing equipments, to check tube expanded and welded joints between Tube and Tube sheet. To operate the Joint Tester is inserted into the tube for seal to expand with a push of a button. Vacuum is created between two seals, one expanded into the Tube ID and other seal covering Tube OD. Tube joint leak, if any, is detected as the vacuum shown on the gauge starts dropping. A very versatile tool to cover tubes of sizes from ¾” to 1. ¼” OD by a simple change of a set of manifold and seals.

In conjunction with Airtester HP [high pressure 200 bar and 300 bar] or Airtester MP [medium pressure up to 10 bar; 145 psi] the HP and MP Detector Tubes are used to monitor the purity of breathing air as supplied from compressors, pressure cylinders or medium pressure air lines. The HP and MP Detector Tubes can indicate quickly and quantitatively the concentration of water vapour, oil, carbon dioxide, carbon monoxide, nitrous fumes according to quality requirements of European Standard DIN EN 12021 [0199].

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,   Remote Field Testing Tube Remote Field Testing Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,    

• Power Source: Electric
• Application: Automotive LED tester
• Automation  Type: Automatic
• Usage/Application: Industrial
•  :  
• Material: MS

• Brand Name: K -Pas
• Product Code: 051

K-Pas Instronic Engineers India Private Limited has established in the year 1990 which is widely involved in manufacturing and also in supplying a extensive range of products which includes Power Equipment such as DC Power Supplier, Voltage Stabilizers, Battery Dischargers, DC Inverter and Special Purpose Machines (Poka Yoke System and Special Purpose Machine) and Electrical Equipment (Resistive Loads, Fuel Cell Products, Durability Listing Equipment, Automation Products and Cathodic, Dispondment Meter). We are recognized in the market for offering the product range with defect free, cost effective prices and timely deliveries of consignments. We keep ourselves updated with the latest trends and industry standards to meet the requirements of the clients.

• Size Available: 1/4 " O.D. TO 3 " O.D.
• Models Available: PVLD-3000

Only one tool necessary for testing multiple tube sizes. Built-in easy to read vacuum gauge. Multifiled exhaust for quiet operation. Lightweight and easy to use.

neon tube tester, Transformers, Electrodes, gas bottles, Vacuum Tester

tube burst tester, Torque Tester