Tubular Level Indicator Dealers

To determine the Level of liquid inside a tank, YPL Tubular Level gauge is one of the economical & reliable instruments For it. It is mounted at the side of tank through flange or thread Connection. Liquid inside the tank passes through a transparent Cylindrical glass tube & liquid Level can be physically viewed Through the glass tube and measured by a graduated scale Mounted on the gauge. Level gauges are made in CS SS PP Construction in different centre to centre distance between Mounting flanges or thread connections on the side of tank as per The tank height. These gauges are custom manufactured according To the c-c distance required. Level gauges have a pair of integral Isolation valve for closing liquid flow inlet. PP construction versions Are made with all PP isolation vales & internals. With its economical Price, easy to use & sturdy construction make it widely used Level Indicator for various liquids.

• Level Indicator: Level Gauge
• Level Indicator: Level Gauge

We are offering tubular level indicator. Kabir” manufactures tubular level indicator (side mounted) with tie rod design, with scale or without scale, with or without inbuilt valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. :- 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg cm² service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm cc distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kgcm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. 10. the connection provided will be flanged screwed tc joint.

• Material: Metal
• Color: Grey
• Condition: New
• Guage Shape: Round
• Application: Testing Water Level
• Type: Liquid Level Indicator
• Country of Origin: India
• Brand Name: Esha
• Brand Name: Esha

CONSTRUCTION All wetted parts 5.5. 316, 304, PV.C & With or without ballcheck holder Tube protectors 6mm O.D. Steel Rod Metal Protectors “U” casing Scale arrangaments Screwed connection 3/4" B.S.P. or union connection 

• Glass tube: 19mm OD-9 25mm OD-5
• Protection guard: MS ‘C’ channels-MC SS 304’C’ channels-SC MS Tie Rods – MT SS 304 Tie Rods –ST
• End fittings: SS 304 – 4 SS316 – 6 CS – C PP – P Other Material – O
• Isolation Valve: Not provided – W Needle valve – N
• Drain: Plug – P Ball valve – B
• Process Connection: Flanged – F Screwed – S
• Scale: Aluminium – A SS 304 – S Polycarbonate – P

We are offering tubular level indicator. flowtech make heavy duty tubular liquid level indicator is a simple & reliable device for direct reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & also endanger human life. 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. .we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg / cm service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm c/c distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kg/cm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. 10. the connection provided will be flanged / screwed / tc joint.

We are a renowned Manufacturer and Supplier of Tubular Type Liquid Level Indicator in Tamil Nadu, India. Our team of adroit personnel designs it using premium stainless steel, carbon steel and others to make it in compliance with the international quality standards. It is extensively used to determine liquid level in high-pressure process tanks, pressure vessels & boiler. Be it a big order or small, timely delivery is ensured!Details : All Wetted parts S.S. 304, 316, M.S. & Carbon steel Heavy Duty Glass Transparent or Reflex Ball Check Holder Drain Arrangement High Temperature And Pressure Ball Check Holders: Design for glass breakage automatically shut off the flow of Process fluid to atmosphere Centre to centre distance Visible length Connection MOC & Medium Working Pressure & Temperature

The observations of visual liquid level are generally required in diverse process industry. This Tubular Glass Level Indicator is easy to use and reliable for letting the user to efficiently carry out pressurized and atmospheric tank applications. This Tubular Glass Level Indicator is parallel mounted along the sides of the tanks. As and when the process level fluctuates, the level present in the transparent glass tube modifies accordingly and provides a local liquid indication to the user. Technical Specification : New Bolted Gland with teflon packing ensures positive leaktighnes for full vacuum as well as 10kg/cm2 pressure service. Sturdy Protection : Glass tube is protected by box section made out of two M.S. channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact. Lightweight : 75% less in weight compared to Reflex and Transparent liquid level indicators; extraordinary strength but less bulky. Excellent Visibility : 16/19/25mm O.D Borosilicate glass gives excellent visibility. Surface tension effects are eliminated. Test Pressure : Full vacuum and/or 10 kg/cm2compressed Air. Order Details : Minimum Order Quantity : 50 PiecesPrice Range : Ranging From 1500 INR to 50,000 INR

• Glass Tube: 19mm Od-9, 25mm Od-5
• Protection Guard: Ms ‘c’ Channels-mc, Ss 304’c’ Channels-sc, Ms Tie Rods – Mt, Ss 304 Tie Rods –st
• End Fittings: SS 304 – 4, SS316 – 6, CS – C, PP – P, Other Material – O
• Isolation Valve: Not provided – W, Needle valve – N
• Drain: Plug – P, Ball valve – B
• MOC of Float Chamber: SS 304, SS 316, SS 316L, PP, PVDF, Others on request.
• Process Connection: Flanged – F, Screwed – S
• Scale: Aluminium – A, SS 304 – S, Polycarbonate – P

Construction & Design Features : The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows. Glass removal for replacement possible w/o dismantling the gauge. 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure. It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler. We are providing Air Vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve or offset constructed isolation valve on request. The connection provided will be Flanged/Screwed/TC joint.

• Range: UP to 4000mm i.e 4 meters
• Pressure Rating: UPTO 12 KG/CM2
• Model No.: TL – 122 without drain or Isolating valve
• Application Liquids: Water, Phenol, other non corrosive liquids.
• SPECIFICATIONS: Our Model No : TL-122
• CONNECTION: Flanges ASA 150# 300 or threaded
• PROTECTIVE CASING: M.S, RECTAGULAR CHANNEL BOX WITH POWDER COATING / S.S.304/S.S 316
• MOC OF WETTED PARTS: M.S / 304 S.S / 316 S.S / P.P
• GLASS TUBE: HEAVY WALLED BOROSILICATE  HW 16/19/22/25
• PACKING: TEFLON /CAF
• TEMPERATURE RATING: UPTO 150’c
• VACUUM: FULL

Tubular Level Indicator that we offer accurately measures the level of liquid in atmospheric and pressurized tanks. Due to its advanced features and technical specifications, it finds extensive usage in different types of pressure vessels, tanks and boilers. We are counted among the top companies, which are engaged in manufacturing and supplying Tubular Level Indicator from Maharashtra, India. We are efficient enough to process retail as well as bulk orders for types of pressure vessels, tanks and boilers even at short notice period.

TUBULAR LEVEL INDICATOR GAYATRI's make Tubular Level Indicators are most simple and reliable device for level visualization. These Level Indicators find wide application for level observation in process tanks and batching tanks. If desired, Scale in volumetric unit is possible.

• Application: LIQUID
• Material: SS304
• Country of Origin: India
• CC Distance: 300

NRG GLOBAL INSTRUMENTS MAKE TUBULAR LEVEL INDICATOR The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows. Glass removal for replacement possible w/o dismantling the gauge. 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure. It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler. We are providing Air Vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve or offset constructed isolation valve on request. The connection provided will be Flanged/Screwed/TC joint.

Backed by our team of dexterous professionals, we have emerged as a reputed Manufacturer, Supplier and Exporter of Tubular Level Indicators from Maharashtra. Tubular Level Indicators we make available are simple low cost and reliable for direct reading of clean liquid levels at low pressure and temperature conditions. Courtesy, our brilliant logistics network, we can provide Level Indicators in bulk at discounted rates within the allocated time.

We are one of the foremost manufacturers and suppliers of a comprehensive assortment of Tubular Type Level Indicators . Our range is appreciated for higher degree of accuracy, precision & compact design, durability and longer service life. Tubular Liquid Level Indicator : Simple & reliable level indicator for direct reading in atmospheric or pressurised tanks upto 8 kg/cm2.They are widely used in day storage tanks.• MOC - C.S./SS.304/ss 316/P.P. & Teflon lined• Range / CCD - 300 MM - 3000 MM.• Connection - 15 NB-50 NB. Flanged/Screwed Type• Application - Suitable for small & low pressurised                       tanks & Max. Temp, upto 70°C.• Orientation - End connection orientation can be   modified as per the customer requirement, eg.   Right/Left/Front/Vertical mounting.

As the liquid level rises in the tank, the float is lifted up due to buoyancy. The float moves inside a SS float chamber. External to this float chamber is a glass tube(MLI 2200)/indicating PVC magnetic ball assembly (RBMLI 2200) which carries the magnetic follower. Due to magnetic attraction, the magnet on the float and the magnetic follower are coupled and move in union. So as the float moves along with the liquid, the follower capsule also moves inside the glass tube(MLI 2200) and PVC magnetic ball changes its colour (RBMLI 2200), and the position of the follower capsule/magnetic ball can be read against the scale.  

• Range: 0-3 metre
• Material of Wetted part: C.S. / S.S..304 / S.S.316 PP / PVC / Rubber Teflon Linned
• Glass Tube: Heavy wall borosilicate glass 19mm
• Pressure rating: 10kg/CM
• Scale: M/C engravd on backelite sheet graduated in cm

Side Mounted Heavy Duty Tubular level Indicator directly indicates liquid level in atmospheric or pressurised tanks. It is a simple and reliable device mounted parallel along the side of tank.

Side mounted heavy duty tank level indicator are suitable for storage tanks, Batch tank, Day tank, Receiver tank. It is simple & reliable devices for direct reading in Atmospheric or pressurised tank application.