Ultrasonic Flaw Detection Service

• Certification: CE Certified
• Application: Hospital
• Frequency: 0-50Hz
• Driven Type: Electric
• Feature: Accuracy, Easy To Use, Proper Working
• Temperature: Low Temperature

• Application: Laboratory

digital ultrasonic flaw detector FD201B:             DAC, AVG curves AWS function High-speed capture and very low noise Gate and DAC alarm;Acoustic-Optical alarm Solid metal housing (IP65)          High contrast viewing of the waveform from bright Powerful pc software and reports can be export to excel Automated display precise flaw location (Depth d, level p, distance s, amplitude, sz dB, ) Automated switch three staff gauge ((Depth d, level  p, distance s) Convenient to make and use DAC and AVG to evaluate the echo, the curve can be modified and compensated Ten independence setup, any criterion can be input freely, we can work in the scene without test  block Big memory of 300 A graph and 30000 thickness value Automated gain and gain scan, automated echo degree Peak hold and Peak memory Powerful PC software and reports can be export to excel RS232/USB The embeded software can be online updated Li battery, continue working time up to 10 hours Display freeze Lock and unlock function of system parameters Dormancy and screen savers Electronic clock calendar Two gates setting and alarm indication

• Standard: ASTM E317
• Report: Hard Copy
• Place of Service: In our Lab

We are providing Ultrasonic Flaw Detector Calibration Service as per International Standard ASTM E317

The Sonatest heritage in product design and Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance. The Masterscan series carries the baton of all these desirable features, but now, thanks to innovative internal redesign, new features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ratio are key functions in the Masterscan range. Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.

KEY FEATURES Automated display precise flaw location(Depth d、level p、distance s、amplitude、sz dB、ф)； Automated switch three staff gauge ((Depth d、level p、distance s)； Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity ； Convenient to make and use DAC and AVG ，TCG to evaluate the echo, the curve can be modified and compensated 100 independence setup, any criterion can be input freely, we can work in the scene without test block； Big memory of 300 A graph. Automated gain and gain scan; Automated make video of test process and play; Peak Hold and Peak Memory； B scan; Automated calculate the size of the flaw with wide bottom type in AVG function. AWS D1.1； 6dB DAC functions; Powerful pc software and reports can be export to excel; The embedded software can be online updated； Li battery, continuous working time up to 9 hours; RANGE 0~ 6000mm (at steel velocity); range selectable in fixed steps or continuously variable. PULSER Spike excitation with low, middle and high choices of the pulse energy. Pulse Repetition Rate: manually adjustable from 10 to 1000 Hz. Pulse width: Adjustable in a certain range to match different probes. Damping: 100Ω, 200Ω, 400Ω selectable to meet different resolution and sensitivity need. Probe work mode: Single element, dual element and through transmission; RECEIVER Real-time sampling at 160MHz high speed enough to record the defect information. Rectification: Positive half wave, negative halfwave, full wave, and RF DB Step: 0dB, 0.1 dB, 2dB, 6dB step value as well as auto-gain mode ALARM Alarm with sound and light,. MERMORY Big memory of 300 A graph ,All the configuration channels and datasets can be transferred to PC via USB port. FUNCTIONS Peak Hold: Automatically searching the peak wave inside the gate and hold it on the display.

• Type: Ultrasonic Flaw Detector
• Certification: OEM Certified
• Application: Industrial
• Condition: New
• Driven Type: Battery, Electric
• Power Source: Battery, Electric
• Feature: Accuracy, Easy To Use, Proper Working, Sturdy Construction, Superior Finish, Live Recorable
• Brand Name: MODSONIC

palmtop, ultra-light digital ultrasonic flaw detector arjun30: one hand operation, only few keys for user friendly operation, high resolution wvga display. auto plotting, dynamic dac, usb communication port. Unlimited data storage on removable micro sd card square wave pulsar with very advanced features like: * test range – 2.5 mm to 5 meter (in steel) * measurement resolution – 0.01mm * one hand operation (weighs only 800 gram with battery). *.note/cable can be attached with each of a-scan data. . * frequency 0.5 mhz to 15 mhz (wideband) * amplitude measurement up to 110% * options of display background colors including black and white for day light viewing. * peak freeze / echo dynamic feature. * reference a-scan pattern of standard test object can saved and recalled in the background for easy comparisons during testing. * b-scan data recording and color flaw plotting within the machine itself.

Ultrasonic flaw detector UD2301 is designed for nondestructive testing of metals, plastics, glass, composite materials, weld inspection and measurement thickness of the various products and structures.Flaw detector allows user to detect various defects such as discontinuities, cracks and heterogeneity of materials in semi-finished products and welded joints, to measure the depth and coordinates of defects, the thickness of products, the speed of propagation and attenuation of ultrasonic vibrations (UT) in the material.Ultrasonic Flaw detector is produced in small housing with optimal size for performing testing in tight spaces. Device has color display with high resolution 320*480 pixels, which significantly improves the usability of the device.AdvantagesDisplay of the device can be operated in any orientation – there are 4 options of display rotation, that allows user to customize the unit by himself, both for lefties and righties users. Instrument could be operated in both portrait and landscape orientations.Appointment of the ultrasonic flaw detector: to test the quality of welds and base metal of products; to detect corrosion, cracks, delaminations and other internal defects; to determine coordinates and parameter estimation of defects such as discontinuity, cracks and uniformity of material in products from metal, plastic, composites and other materials; to measure the thickness of products.  Flaw detector is equipped with 3 standard type AA rechargeable batteries. The device can also operate from simple batteries the same type. Using the batteries of standard type allows autonomous operation of the device in almost any conditions – if not the ability to charge batteries, it is possible to have spare batteries, or buy new batteries at any store.Flaw detector allows user to solve a wide range of tasks – from the thickness measurement of thin products to large-sized casting flaw detection.Sealed housing with rubber protective strips – Ultrasonic flaw detector UD2301 is ideal for using in workshop and field conditions with high humidity, dust, etc. Device has frost-resistant display that allows user to use the device at any season and in any climatic zone of the Earth.

• Country of Origin: India
• Operating frequency range: from 1 to 10,0 MHz
• Range of measured time intervals (duration of scanning): from 6 to 1000 μs
• Velocity range: 1000 - 9999 m / s
• Error of measurement of time intervals: not exceed ± 0,025 μs
• Testing gain range: 125 dB
• Averaging over the quantity of starts: from 1 to 16
• Range of variation of temporal sensitivity adjustment (TVG): 40 dB
• Number of control points TVG: 15
• Duration of the excitation pulse to the load: from 0,0 to 0,5 μs
• Amplitude of the excitation pulse to the 50 Ohm load, not less: 100, 200, 300
• Operating frequency range of the receiver on the level -3 dB: from 1 to 10 MHz
• Scanning: from 1 to 1000 μs
• Delay of scanning: from 0 to 2000 μs
• Range of measurement of time intervals: from 0 to 1000 μs
• Setting a delay in the prism of the probe: from 0 to 15 μs
• Automatic signaling of defects (AFS): dual-gate
• Setting range of AFS gates: from 0 to 2000 μs
• Adjusting thresholds of AFS gates: from 0 to 100 % of screen height
• Detection of signals: positive half-wave, radio mode
• Dimensions (W x H x L): 80 x 162 x 38 mm
• Weight, not more: 250 g (without batteries)
• Mean time between failures: not less than - 3000 hours

• Frequency: 50Hz
• Brand Name: Modsonic
• Vertical linearity error:: <= 2.5%
• Horizontal linearity: <=0.1%
• Electrical noise level:: <=8%
• Dynamic Range: >36dB
• Discrimination: >40dB
• Measuring Range: 0-9999 mm
• Sound speed range:: 1000-15000 m/second
• Dimension: 63 x 170 x 61 mm

• Range: 0.5–15 MHz

Ultrasonic flaw detector 8 individually programmable channels, Two gates per channel, Free from distortion & parallax error.Gain, gate, Range, Memory, etc.9 sets of Calibration memory,Output for recorder available.

• Frequency: 0.2MHz to 1MHz b) 0.5MHz to 4MHz c) 0.8MHz-8MHz,2 MHz to 20MHz
• Features: It has TCG (Time Controlled Gain) which compensates for amplitude decay with distance. A very useful feature, Dynamic DAC curves which allow change of Test Range and Gain after plotting them
• Recording: Free run or with positional encoder for actual location
• Temperature (deg. Celsius): 0-50 Degree C
• Dimension (mm): 170x260x110mm (HxWxD)
• Weight (kg): 2.1kg With Battery
• Test Range: 2.5mm to 10 meter (0.100 in to 400 in) (longitudinal waves in steel)
• Delay: Variable from -10 to 2000mm (-0.3 to 30 inches).

RTUL's Portable Ultrasonic Flaw Detectors provide a very user-friendly flaw detection technique to analyze blow holes, porosity, inclusion & any types of flaws.

Colour LCD/TFT Display Fast Scanning Speed Wide Viewing Angle Auto DAC with - 6dB and -14dB Curves Li-ion battery for long battery operation Very Low Noise

It combines the 21th-century operating platform with the reliable and robust hardware of JE’s well-established JOHARI ENGINEERING portable flaw detection instruments. It incorporates a range of innovative features to ensure that this new instrument is adopted as the everyday workhorse of flaw detectors by NDT inspectors.

• Product specifications: GTJ-U600 fully digital ultrasonic flaw detector
• Examination range: (0
• Working frequency: (0.2
• Sound speed range: (1000
• Dynamic Range: ≥36dB
• Vertical linearity error: ≤2.5%
• Horizontal linearity error: ≤0.1%
• Discrimination: >40dB(5P14)
• Sensitivity margin: >65dB (deep 200mm Ф 2 flat bottom hole)
• Digital suppression: (0
• Electrical noise level: ≤8%
• Probe type: Straight probe, oblique probe, dual crystal probe, penetration probe
• Gate: Incoming gate, loss gate; single gate reading, double gate reading
• Pulse amplitude: Low (300V), medium (500V), high (700V) grading options
• Pulse Width: Continuous adjustment in the range of (0.1
• Probe damping: 100Ω, 200Ω, 400Ω optional
• Real-time sampling of hardware: High resolution 10-bit AD converter with sampling speed of 160MHz and high waveform fidelity
• Detection method: Positive half wave, negative half wave, full wave, radio frequency detection
• Filter band: (0.2
• Data storage: 100 sets of flaw detection parameter channels, 1000 flaw detection echo signals and parameters
• Communication Interface: USB2.0 high speed communication transmission interface
• power supply: DC (DC) 9V; lithium battery works continuously for more than 8 hours
• Dimensions: 263×170×61 (mm)
• Ambient temperature and humidity: Temperature: (-10

• Type: Ultrasonic Flaw Detector
• Certification: CE Certified
• Color: Ivory, Light Grey
• Condition: New
• Frequency: 0-50Hz, 50-100Hz
• Driven Type: Battery
• Power Source: Electric
• Feature: Accuracy, Sturdy Construction
• Temperature: High Temperature, Low Temperature, Medium Temperature

Among the non destructive testing methods for internal defects, Ultrasonic testing is the fastest and most reliable method. With this one can save on material, labour, machine cost & time, by early detection of defects at raw material stage. RTUL’s Portable Ultrasonic Flaw Detectors provide a very user-friendly flaw detection technique to analyze blow holes, porosity, inclusion & any types of flaws. High frequency sound waves generated by piezo electric transducers enter the object to be tested and get reflected at the interphase of defects such as cracks, blow holes, inclusions, porosities, lack of bond etc. The reflected echo is displayed in form of peaks on screen of ultrasonic flaw detector. The amplitude and position of these peaks give useful information regarding the location, shape & size of the defect. Applications For casting, forging and rolled products, weld inspection, bond testing, automatic immersion testing for tubes and rods, research and laboratory studies. SPECIAL FEATURES :UFD 4444D Bright High Resolution TFT Display. Light Weight & Easy to use. DAC with Alarm. RF output. B - Scan Video Mode. Dual Gate. USB Port. A Scan Freeze. Battery Life: 8 hrs.\ Battery Life: 8 hrs. Special Systems Offered for : Nodularity Monitoring/Measuring. Elastic Constant Measurement. Single Channel Multiplexing online testing. Multi-channel on line testing. Special Systems Offered for :