Ultrasonic Sensor Module Dealers

• Material: PCB
• Operating Voltage: 5V DC
• Operating Current: 15mA
• Measure Angle: 15°
• Ranging Distance: 2cm - 400cm
• Working Frequency: 40Hz
• colur: green
• Sensor Type: Ultrasonic
• Model Name/Number: HC-SR04
• Product Type: sensor
• Usage/Application: Position Sensor
•  :  

• Weight: 0.15Kg(s)

• Minimum Order Quantity: 1 Piece

• Voltage: 220 - 240 V, 50/ 60 Hz
• Brand Name: Steinel GmbH
• Minimum Order Quantity: 50 Unit
• Diameter: 12 meters.
• Max. output: 2000 W
• Detection angle: 360
• Reach: 6 x 6 m
• Light-level setting: 10 - 1000 lux
• Protection class: II
• Temperature range: -20-+55 Degree C
• Dimensions(h x w x d): 120 x 120 x 68 mm
• Sensor type: 40 KHz ultrasonic
• Model/Type: Ultrasonic Presence Detector US360

• Type: Wind Sensor
• Application: Industrial
• Condition: New

This is a low-cost anemometer, which utilises proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue outputs. To confirm correct operation, outputs are transmitted together with an instrument status code. With a robust, corrosion-free polycarbonate housing, this small, lightweight wind sensor is recommended for use in harsh environmental conditions and is particularly suited to marine & offshore (ships, data buoys) and land based installations. The WindSon has no moving parts, offering maintenance-free operation in a wide range of applications.    

We are offering ultrasonic sensor module (gh-311). 1.specification： voltage : 6-12v(dc) current : max 2ma output signal : 0-5v (output high when obstacle in range) sentry angle : max 15 degree sentry distance : 2mm-8000mm frequency : 40khz. pin : 3pin supply module with 6-12v, the output will be 5v while obstacle in range, or 0v if not. the out pin of this module is used as a switching output when anti-theft module, and without the feet when ranging modules, module working principle: (1) adopt io trigger through supplying at least 10us sequence of high level signal, (2) the module automatically send eight 40khz square wave and automatically detect whether receive the returning pulse signal, (3) if there is signals returning, through outputting high level and the time of high level continuing is the time of that from the ultrasonic transmitting to receiving. test distance = (high level time * sound velocity (340m/s) / 2, note: (1) this module can not be used for distance measurement. (2) the module should be inserted in the circuit before been power, which avoid producing high level of misoperation ；if not, then power again.

• Range: 0.1 m/s to 60 m/s
• Range: 0° to 359°
• Accuracy: +/- 2%
• Resolution: 0.01 m/s
• Output Units: m/s
• Accuracy: +/- 2%
• Resolution: 0.1°
• Output Units: Degrees
• Calibration Traceability Offered: MD

The KDS-101 Sensor measures wind speed and direction in automatic weather station applications. The four ultrasonic sensors of the unit measure the time it takes for ultrasound to travel from one transducer to another for computing the wind speed and direction. The sensor provides data continuously and the measurements are reliable regardless of altitude, temperature and humidity. It is used for collecting wind measurement data for aviation, road & railway safety and other weather monitoring applications.   Features   Measures a mild breeze to storms Measures accurately in all directions Robust housing resists contamination & corrosion Reliable data in all wind conditions and climates Tight interchangeable tolerance Excellent long-term stability Individual sensor calibration Wide supply voltage Easy integration Indigenously built; state-of-the-art technology Varied set of commands and calculations RS485 digital interface

• Country of Origin: Made in India
• Sensor Type: Ultrasonic
• Item Model Number: HC-SR04
• Usage/Application: Industrial

• Features: Best grade material,High durability

• Sensor Type: Ultrasonic
• Voltage: 5VDC
• Output: Digital Sensor
• Detection distance: 2cm-400cm (0.02M - 4.0M)
• Static current: < 2mA
• Level output: high-5V
• High precision: up to 0.3cm

• Item Code: IRSEM0023
• Brand: HC-SR04
• Part Number: 1
• Sensor Type: Ultrsonic sensor
• Working Voltage: 5V(DC)
• Static Current: Less than 2mA
• Echo Signal: output TTL PWL signal

• Operating Voltage: 5v
• Warranty: 6 Months
• Finishing: Polished
• Packaging Type: Packed in Boxes
• Range of measurement: 0.02 to 4M
• Frequency of sensor: 40KHz

Ultrasonic Range finder: HC-SR04 provides 2cm-4meter non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit. Typical application of Ultrasonic Range finder: HC-SR04 is measurement of distance.

• Country of Origin: Made in India
• Features: Ultrasonic sensor used, 5 Volt to 36 Volt universal board, High precision range and timing, Best quality with high accuracy
• Size/Dimension: 65 x 35 mm
• Brand: Power
• Sensor Type: Ultrasonic Sensor
• Usage/Application: For Tunnel And Dispenser
• Phase: Single Phase
• Power Supply: 5 V DC
• Sensing Distance: Up to 450 cm
• Detection Angle: Not less than 15 Degree

• Brand Name: Ultrasonic HC-SR04
• Accuracy: High
• Weight: 9gm
• Features: Stable performance, Accurate distance measurement , High-density Small blind distance.
• Item Code: 332878
• Operating Voltage: 5 V
• Average Current Consumption (mA): 2 ma
• Frequency(Hz): 40000 HZ
• PCB Size (mm): 45×20 (LxW) mm
• Part Number: HC-SR04
• Sensor Type: Distance Measurement
• Colour: Blue

• Power Supply: 5V DC
• Quiescent Current: <2mA
• Effectual Angle: <15°
• Ranging Distance: 2cm – 500 cm/1" - 16ft
• Resolution: 0.3 cm

The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent range accuracy and stable readings in an easy-to-use package. The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent range accuracy and stable readings in an easy-to-use package. It operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). Similar in performance to the SRF005 but with the low-price of a Sharp infrared sensor.   Power Supply :5V DC Quiescent Current :

• Weight: 30 g
• Voltage: 5 VDC
• Accuracy: 0.2%
• Resolution: +/-0.2 %
• Operating Distance: 200-8000 mm
• Current: 100 mA
• Shape: Round
• Current Range: 0
• Power: 20 Watt
• Detection Distance: 2cm-400cm (0.02M - 4.0M)

• Feature: Original and Genuine items Working Voltage : 5V(DC) , Static current: Less than 2mA.

The HC-SR04 ultrasonic sensor uses sonar to measure distance to an object. It offers excellent range accuracy and stable readings in an easy-to-use package. It operation is not affected by sunlight or black material like Sharp rangefinders are (soft materials like cloth can be difficult to detect). Module main technical parameters: 1.Working Voltage : 5V(DC) 2.Static current: Less than 2mA. 3.Output signal: Electric frequency signal, high level 5V, low level 0V. 4.Sensor angle: Not more than 15 degrees. 5.Detection distance: 2cm-450cm. 6.High precision: Up to 0.3cm 7.Input trigger signal: 10us TTL impulse 8.Echo signal