Universal Surface Gauges Dealers

Universal Surface Gauge has many desirable features and is designed for wide range of uses, which are supplied in four sizes. The base is made from case hardened steel, ground on bottom and at one end. The Fine adjustment feature makes it possible to obtain quick and accurate settings. This adjustment is made by a knurled thumbscrew, which is located at the end of the rocker. The rocker runs the 2/3 the length of the base and pivots against a stiff spring located at the rear end of the base   SPECIFICATIONS:                                     KM – 900            KM – 901            KM – 902            KM – 903HEIGHT                           185 mm              300 mm              450 mm              600 mmBASE          LENGTH                            55 mm                80 mm              100 mm              110 mmANDWIDTH                           45 mm             65 mm            85 mm           90 mm  Additional pillar of 4”, 9”, 12”, and 18” can be supplied on demand to respective cat nos

Details: A basis tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work. Description Design incorporates:1. A fully hardened and ground base which serves as an accurate reference surface.2. A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces.3. A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge.4. Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work.5. Grooves on the side of the base allow for comfortable grip.6. Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC.   Base Dimensions Spindle Length Scriber Length inch mm inch mm inch mm 2-3/16×1-5/8 55×40 7" With extra 4" spindle 175 mm with extra 100 mm spindle 3 75 3-1/8×2-1/2 80×63 12" With extra 9" spindle 300 mm with extra 225 mm spindle 7 175 4×3-1/2 100×90 18" With extra 12" spindle 450 mm with extra 300 mm spindle 7-9/32 185

• Specification :-: Sr. No.
• Cat No.: 1.
• AA - 1411: 2.
• AA - 1412: 3.

• used for marking & transferring measurement. • ground base for accurate reference surfaces. • v groove on the front end which allows the spindle to adjust to any angle above or below the base. • v groove in the base for cylindrical work. • a very positive fine adjustment through a rocker arm that makes smooth & accurate setting. • grooves on the side of the base for a sure & easy grip. • dial indicator can also be used. • two gauge pins facilitate easy linear marking. Sr.no. Cat no. Size height 1. Ul- 50101 80 l x 65 w x 300 h [12"] 300 2. Ul- 50102 100 l x 85 w x 450 h [18"] 450 3. Ul- 50103 110 l x 90 w x 600 h [24"] 600

• Brand Name: Sri Amman Traders
• Country of Origin: Made in India
• Color: Silver, Black
• Material: Stainless Steel
• Usage/Application: Industrial
•  :  

A basis tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work.   Description Design incorporates: 1. A fully hardened and ground base which serves as an accurate reference surface. 2. A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces. 3. A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge. 4. Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work. 5. Grooves on the side of the base allow for comfortable grip. 6. Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC.

Features:- Used for marking & transferring measurement. Ground base for accurate reference surfaces. V groove on the front end which allows the spindle to adjust to any angle above or below the base. V groove in the base for cylindrical work. A very positive fine adjustment through a rocker arm that makes smooth & accurate setting. Grooves on the side of the base for a sure & easy grip. Dial indicator can also be used.Two gauge pins facilitate easy linear marking.

• Place of Origin: Delhi, India
• Supply Ability: 5000 Unit/Units per Month
• Port: India , New Delhi
• Product name: Universal Surface Gauge

• Features: Sturdy construction surface guage, Consists of Adjusting knob and hardened scriber, Very useful for every workshop

universal surface gauges, magnetic holder, Parallel Blocks

universal surface gauges, gauge hatch, mechanical gauges, Brass gauges

universal surface gauges, push pull gauge, Manifold Gauge, carbide gauge

universal surface gauges, prick punches, Nail Punches, brick bolster

universal surface gauges, air angle grinder, Magentic V Block

Krystal Universal Surface Gauge, Krystal Parallel Magnet Block

universal surface gauges, Adjustable Tap Handle, Knurling Tool Holders

Universal Surface Gauge, Emery Rolls Sheets, Universal Tilting Tables