UTL Solar Charge Controller Dealers

• Size: 25.8 x 19.8 x 12.6 cm
• Type: Solar Charge Controller
• Application: Indoor
• Color: Grey, White
• Feature: Convert Normal Inverter to Solar Inverter
• Voltage: 12 Volt or 24 Volt
• Condition: New
• Display Type: Digital
• Theory: SMU converts your simple Inverter to Solar Inverter
• Frequency: 60Hz
• Driven Type: Electric
• Temperature Range: 0-100°C
• Accuracy: 70%
• Certificate: CE Certified, ISI Certified
• Current Type: DC
• Country of Origin: India
• Brand Name: UTL Solar

• Power: 10A/20A
• Country of Origin: Made in India
• Voltage: 12/24V
• Usage/Application: Solar System Controller
• Model Name/Number: PWM 1224/10A
• Brand: UTL
• I Deal In: New Only
• Phase: Single phase
• Features: Works Efficiently, LED/LCD Display
• Dimensions: 75 x 132 x 36mm
• Battery Type: Tubular
• Is It Portable: Portable
• Color: White
• Battery Charge Current Maximum: 200Ah
• Battery Deep Discharge Protection: Available
• Battery Low Voltage Cut: Yes
• Over Charge Protection: Yes
• Pv Input Voc Maximum: 22.5V - 45V
• Storage Temp.: -20 to 70 degree C
• Temperature: 0-50 degree C
• Weight: 130gm
•  :  

• Feature: Durable, Light Weight
• Voltage: 12 V
• Brand Name: UTL
• Current Range: 10 A
• Phase: Single Phase
• Frequency: 50 Hz
• Minimum Order Quantity: As per Client Requirement

• Application: Solar electrification
• Use: Battery Charging and load control
• Operating temperature: -10°C to 50°C
• Storage temperature: -25°C to 85°C
• Chargingr type: Two step series PWM
• Indications: Charging, Low Battery, Overload protetcion
• Special Features: Reset Button
• Mobile Charging: 5 pin mobile charging
• Electrical : Nominal system voltage
• 12 V: Charging current
• 6 A: 10 A
• Max SPV Size: 90 W
• 150 W: Charge Controller efficiency
• >95%: Idle consumption
• <6 mA: Protection
• Against module reverse current flow, reverse battery and overload: Mechanical
• Fixing: Wall mounting with screws
• Case: Metallic Body
• Size (Shipping)(mm): 100 x 90 x 50
• Weight (Shipping): 600 gm

The primary function of a charge controller in a stand-alone PV system is to maintain the battery at highest possible state of charge while protecting it from overcharge by the array and from over discharge by the loads. Any system that has unpredictable loads, user intervention, optimized or undersized battery storage (to minimize initial cost) typically requires a battery charge controller. The algorithm or control strategy of a battery charge controller determines the effectiveness of battery charging and PV array utilization, and ultimately the ability of the system to meet the load demands. Additional features such as temperature compensation, alarms, meters, remote voltage sense leads and special algorithms can enhance the ability of a charge controller to maintain the health and extend the lifetime of a battery, as well as providing an indication of operational status to the system caretaker.

We are known to be the best solar charge controller production and manufacturers in the industry. The purpose of using the Solar Charge Controller is to avail higher efficiency and better performance by maintaining proper charging voltage and extensively used in solar applications. To meet the customers need, the solar charge controller is available in various specifications as per users needs. We provide you this great Solar Charge Controller at very affordable prices.

• Application: WIND
• Power: 12/24/48/96 V
• Charge Controller Type: PWM
• Brand Name: RRT
• Type: Automatic
• Country of Origin: Made in India
• Phase: Single phase

Since the brighter the sunlight, the more voltage the solar cells produce, the excessive voltage could damage the batteries. A charge controller is used to maintain the proper charging voltage on the batteries. A solar panel just performs under the parameters upon which it was built. It’s the charge controller, sometimes called a charge regulator that sites between the solar panel and the battery that regulates the voltage and the current and essentially halts charging activity temporally when necessary. Solar panels are connected to the charge controller. The charge controller is connected to the battery.the solar electrical charge controller controls the incoming charge to the battery. More complex sophisticated charge controllers do even more. Your system cannot function without one. Any battery being charged, even with a small solar panel, can be over charged and destroyed given enough time without a charge controller.

• Country of Origin: Made in India
• Usage/Application: Solar System Controller
• Load Type: DC
• Features: Save Money with UTL rMPPT Technology. - Protection from Battery Over Voltage & Current - Protectio
• Dimensions: 180 x 220 x 85 mm
• Color: Grey

• Brand Name: Phocos

We are offering charge controller. the cmlnl series is a sophisticated solar charge controller family for low cost applications. the electronic circuit is equipped with a microcontroller that provides high-efficiency charging technology together with a number of outstanding status display, warning and safety functions. The cmlnl series comes with two nightlight function mode. One of them is programmable that switch on the load output for a adjustable number of hours from dusk. the nightlight function is overridden by a battery deep discharge protection to avoid excessive discharge and damage of the battery. the temperature-compensated three-state pwm charging method (boost-equalize-float) is now adjustable to sealed and vented lead-acid batteries. the low voltage disconnect function can be controlled either by soc or by voltage. the battery status, charging status and load status are clearly indicated by 5 leds.

• Controller type: Home Lighting Controller
• Rating: 12V & 24V, Auto
• Power Rating: 170Watts / 340Watts
• Electronic Protection: Short Circuit Protection, Over Current Protection
• Indications: Charging and Full Charger Battery Level
• Regulation Point: 14.3V / 28.6V
• Low Voltage: Disconnect 11.5V / 23V
• Connection Terminal: Up to 2.5 mm2

Uses no polluting, inexhaustible energy from the sun Omani-directional pure white light safe and easy to operate Adequate protections and indications Approved by CPRI as per MNRE specifications Rugged and attractive body made of ABS plastics UV  

We are dealing best Charge Controller supplying company.

• Type: Automatic
• Usage/Application: Solar System Controller
• Brand: UTL
• Phase: Single phase
• Solar Array: Dual Array
• Load Type: AC
• Is It Portable: Non Portable
• Switching Device: Power MOSFET
• SPV (Pmax): 250W-1kW
• Technology: MPPT
• Battery Nominal Voltage: 24 V
• Operation Temperature: 0 DegreeC to 50 DegreeC
• Ingress Protection: IP-20
• Efficiency Rate: 95%

• Voltage: 48V
• Mounting: yes
• Usage/Application: Solar System Controller
• Model Name/Number: MPPT 4810
• Charge Controller Type: MPPT
• Brand: UTL
• Phase: Single phase
• Load Type: DC
• Current Range: 10 A
• Body Material: Metallic
• Features: Save Money with UTL rMPPT Technology. - Protection from Battery Over Voltage & Current - Protectio
• Dimensions: 220 x 240 x 150 mm
• Is It Portable: Portable
• Color: Grey
• Weight: 3.5Kg

• MPPT Charge Controller: Solar

We are offering mppt charge controller. energy win's ewt- charge controllers are compatible with 24/48v modules. the optimum charge/float voltages for flooded lead-acid, gel or agm batteries can be selected in the charge controller. the easy-to-read display can be augmented with an optional remote monitoring system. features: • mppt accuracy 99.5% • conversion efficiency ~96% • fan controlled cooling • lcd display with simple function keys and status display on led • charging current and voltage are adjustable according to different battery types • communication interface provided with rs232 • optional online monitoring system with gsm-gprs modem.

Nio-CC Series solar charge controller (900-3300W) is adopt an advanced MPPT and provide higher efficiency up to 98% with lower power loss.

• Brand Name: UTL

-save money with utl rmppt technology -protection from high voltage and current -protection from short circuit to keep your system safe -automatic battery detection -remove build-up sulphate to increase battery life -run dc load with solar charge controller.

A charge controller is utilized to control the flow of electricity between the module, the battery and the loads. It prevents battery damage by ensuring that the battery is operating within its normal charge levels. If the charge level in the battery falls below a certain level, a 'low voltage disconnect' (LVD) will cut the current to the loads, to prevent further discharge.

• Brand Name: GEESYS

We are offering solar mppt charge controller. dcac voltage,current and energy monitors. mcu based buck converter 1224volt 2040a. mppt technology, efficiency improved by more than 20%. first in its class lcd with power and energy measurement. menu settable configuration using 2x16 lcd and 3 push buttons. menu settable battery voltage, battery current , float voltage and float current. three stage charging. over voltageover current protection. optional relays to control mains charger and inverter.

Eco Solarr is specialize in offering a wide collection of charge controller in India.

Neulite Products Pvt Ltd is one of the leading manufacturing & exporting company of Charge Controller from India.

Charge Controller, Thin Film Photovoltaic Solar Module, Solar Inverter

UTL Solar Charge Controller, UTL Solar Batteries, onsite support

Charge Controller, SOLAR PANELS, Led Light, Solar Fans

UTL Solar Charge Controller, Portable Solar System, Solar Powered Water Pump

Solar Mppt Charge Controller, Solar Power Plant, Solar Grid Tie Inverter

Charge Controller, Solar Batteries, SOLAR PANELS, Solar Inverter, Inverter

Charge Controller, solar power pack installation, Solar Module

Solar Mppt Charge Controller, Oil Injected Rotary Screw Compressors