V Blocks Dealers

These Boring tool devices are used to set boring tool to the exact diameter on boring machines and machine tools with rotation boring tools. Because of their magnetic bases, they can be held directly on boring spindle. The clamps can fit at any desired position whereby any particular bore size can be set on the device. These devices have ON / OFF switches, as per requirements and aid in holding the job on boring spindle. The ‘ V ‘ slot is ground to 5micron accuracy.

• Current Rating: 16 A
• Voitage Rating: 250V
• Wire Range: 22-14 AWG- 1.5 mm2
• Housing: PA66 (UL 94V-0)
• Wire Cage: Brass, Nickel Plated
• Screw: M3.0, Steel (A3), Zinc Plated
• Torque: 0.5 N.m
• Solder Pin: Brsaa, Tin Plated

• Material: Metal
• Surface Finishing: Polished

TOOLFAST' Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately fitted magnet ensures easy movement of knob. Available in single as well as matched pairs.   toolfast

Magnetic V Block is valuable and multipurpose in tool – making and evaluation, in quality control and device room. Because of their tremendously elevated magnetic power they can be utilized for drilling and grinding and even for light milling work.There are three magnetic surfaces Magnetic v Block supplier. In it top and base surface with 90 ‘v’ angle and end surface opposed to switch. Every three magnetic surface and the two sides are cautiously ground.

We offer our clients with quality range of V Pulley Block. These are fabricated using quality tested material, thus ensuring maximum efficiency, high speed, safety and smoothness in handling various loads. Further, we also conduct stringent quality checking before procuring our range of raw material from trusted and reliable vendors.   Salient Feature ISI marked manufactured in ISO 9001: 2000 certified company. Assured quality & interchangeability of parts Tested as per ISI procedure for 50% over load. Assured safety Grade 80 load chain & zinc plated hand chain Longer chain life Rugged German design, in use for more than 30 years assured reliability Double ball bearing supported load wheel Smooth operation Precision machined case hardened alloy steel gears Long life, noiseless operation Fully pocketed S.G. iron cast load chain wheel Long life, safe and smooth running Anti corrosive powder coated zinc plated parts Anti rust & better aesthetics

With our brilliant logistics network, we can furnish urgent and massive requirements of the buyers with ease. We are associated with leading names that enable us to deliver top - of - the - line quality products in the markets. Also, our vendors aid us completely in delivering high quality raw material. These machines have following characteristics : Frame - The frame is fabricated from solid steel plates Crankshaft - Manufactured by special steel with grounded bushes Ram Slide - Heavy duty cast iron slide with proper alignment duly hand scraped Fly Wheel - A fly wheel guaranteed to provide high energy Brake - Spring compensated powerful brake Stroke - Adjustable stroke as desired Clutch  -  Designed to operate heaviest operating conditions with continuous stroke Accuracy - Slide & beds are finished as per I.S.I standards

• Type: Magnetic V Blocks, V Blocks
• Material: Stainless Steel, MILD STEEL
• Shape: RECTANGULAR
• Application: Machinery
• Color: Grey
• Surface Finishing: GRINDING SURFACE
• Feature: Advanced Quality, Highly Functional, Precise Design, Strong
• Product Name: MAGNETIC V BLOCK

torrens high power presents magnetic v block material iron deep gray colour accuracy for squareness .0005 micron specially v block uses for inspection purpose,tool room,standerd room magnetic v block have three sides magnetic surface when turned "on" all three magnetic surface are active.permanent magnet holds the work in v side .magnetic pulling capicity will not decrease even after long use.

As a quality driven firm, we present to you a high quality assortment of Non Magnetic V Blocks that stand out of the rest owing to their high quality, durability and longevity. The entire lot is prepared at our state-of-the-art production unit, under the surveillance of experts. We are Delhi, India Manufacturer, Exporter & Supplier of Non Magnetic V Blocks and known for our fair price policies.

Used for grinding, light Miliing, Drilling & inspection of round & square Jobs.Surface A, B, C, D are hardened to hardness 60 ± 2Rc. Two V block per set.Uniform and Strong magnetic pull to all three magnetic surfaces,Top, Bottom & V Faces. Specifications: SrNo. Cat No. Size Range (mm) Pull 1.UL-32001 Hard 40L X 40W X 50H [2"] Ø 3 - Ø 25 25 Kg 2.UL-32002 Hard 75L X 56W X 75H [3"] Ø 5 - Ø 40 75 Kg 3.UL-32003 Hard 100L X 70W X 95H [4"] Ø 5 - Ø 65 100Kg 4.UL-32004 Hard 150L X 75W X 100H [6"] Ø 5 - Ø 70 125Kg 5.UL-32005 Hard 200L X 125W X I50H [8"] Ø10 - Ø140 175kg

Capturing the market with our exceptional product range, we are located in Delhi(India) and cater to the wide market. As we take complete care of the products that we offer, we make excellent arrangements for their storage as well. Thus, there are minimal chances of damage at buyer's end.   Features : Used for checking heavy and odd shaped round jobs. Perfectly matched pair having accuracy 0.005mm. Include angle of roller is 90°. Standard bearings are used which are replaceable. Jobs don't get damaged due to bearing on top. Special sizes suitable for different diameter can also be manufactured.

• Material: Cast Iron
• Magnet Grade: N35, N38
• Front Shape: V Shape
• Packaging Type: Box
• Surface Treatment: Galvanized

• Material: Metal
• Application: Machinery
• Color: Grey
• Feature: Highly Functional
• Surface Finishing: Coated

Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately fitted magnet ensures easy movement of knob. Available in single as well ass matched pairs.    These V-Blocks have main holding V and bottom face fitted with hardened steel plates having hardness 52-56 HRC Parallelism & Squareness of all faces & V within 0.005mm Most Suitable for inspection and tool room application Inspection certificate is furnished

• Country of Origin: India
• Color: Black, Blue, Green, Grey
• Feature: Advanced Quality, Perfect Strength, Strong

Tear resistance Colorfastness Durable and lightweight Available in different sizes Super soft Different colours available 45 mm blocks Standard size (60 x 100) inches

ASME SEC V BASIC CALIBRATION BLOCK 19MM.Dimensions: L X W X T (110mm X 150mm X 19mm).Description: The smooth scanning surfaces seen on the majority of general-purpose test blocks, such as the IIW or DSC, are not present on ASME Basic Calibration Blocks because they are not designed to be a perfect replica of actual components. Instead, all of the surfaces of our Basic Calibration Blocks are media blasted to produce a rough surface texture that is more reminiscent of actual inspection conditions. used to create the primary reference responses for UT weld inspection.Geometry: consists of three side holes that are at least 1.5" deep and 3/32" in diameter. 1, 4, and 34T are the locations of the holes through the thickness. has two EDM notches that are 2%T deep, 1/4" at their widest point, and 1.0" at their shortest point. according to Fig. T-434.2.1 of ASME Sec. V Art. 4.Material : Carbon steel,Stainless Steel,Titanium,Aluminum,Alloy Steel,Cupro Nickel,Inconel etc.