Valve Actuators Dealers

The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : Ease of operation. Remote control facility. Proportional action of final control element in close loop system. Attaining & holding the desired preset position of the valve/damper. Various indications & alarms are available on the remote control panel & also on the unit. Emergency manual operation possible in case of power failure. Works on most convenient & easily available source of energy i.e. electricity. Models available to cover wide range of valves & dampers. Units with Integral starter will save cost of cables. Units with Electronic controller will facilitate field programming. Design The Basic design of the Emtork Actuator consists of an electric motor, reduction gear unit and control compartment. Various models have been developed to suit operating torque, speed, process parameters, area of operation etc. Additional supplementary spur and worm gear boxes are offered to get higher operating torques and quarter turn motion. Linear motion actuators have been developed to impart the required thrust to operate globe valves. The models are available for on / off and regulating duly and also for hazardous area application.

"Cair" Manufactures On – Off Duty 415V AC Three Phase Quarter Turn CMRI Certified Flame Proof Rotary Actuator Suitable for Quarter Turn Valves & Rotary Application and Industrial Dampers. Electrical Actuator Details: Manufacturer: Cair Euromatic Automation Brand: Cair Model: ATQ Basic Characteristic: On – Off Type Travel: Quarter Turn Rotary 90 Degree Power Supply: 415V AC Housing: Aluminium Die Cast Cover: Aluminium Die Cast Enclosure: IP 67 Wather Proof Actuator Torque Switches: Provided Limit Switches: Provided Stall Protection: Built-In Thermal Protection Position Indicator: Continuous Needle Type Position Indicator Manual Override: Wheel Type Various Options: • On - Off Basic Type • On - Off With Integral Starter Unit • Modulating Type • Modulating Type with Integral Starter Unit • Potentiometer Feedback • With Panel Mounted Starter Unit Controller

Dome valve actuator are easily inter changeable with any imported ,any make dome valve & Chinese valve . Actuator construction is simple and reliable changing the straight motion into rotational motion. That is why actuator has less wearing parts. Large bearing surfaces are securing long life cycle. Actuator functions are exact and clearance-free.Actuator type Single acting Double acting Technical specification Max operating pressure - 1 MPa (10 bar) Operating media - Air, neutral gas Operating Temperature : -10oC - +100oC Spring return - Coil springs Rotary : - 90o (- +2o) Torque - upto 600 N-m

• Country of Origin: India
• Material: Aluminum
• Application: Liquid Valve
• Color: White
• Power: Pneumatic
• Pressure: High Pressure
• Structure: Butterfly
• Certificate: CE Certified
• Port Size: Multisizes
• Brand Name: Rotex

• Type: Pneumatic Valve Actuators
• Material: Carbon Steel, Stainless Steel
• Application: Gas Valve, HVAC System, Liquid Valve
• Color: Blue, Green, Red, White, Yellow
• Power: Pneumatic, Solenoid
• Pressure: High Pressure, Low Pressure, Medium Pressure, Vacuum
• Structure: Ball
• Certificate: ISO 9001:2008
• Brand Name: UTVC

ball valve pneumatic actuator are used in air, gas, chemical, water and in other industries. We manufacture, supply and export ball valve pneumatic actuator that are perfectly finished. Our ball valve pneumatic actuator are trunnion mounted and fe floating type. Moreover, these ball valve pneumatic actuator have high rating. features : design : ball valve pneumatic actuator fire safe blow out proof stem construction ball & trims : ss 304, 304l,316,316l,monel material : cs astm a 216 gr. Wcb, lcb, lcc, cf8, cf8 m etc. seat : ptfe, gft, cft rating : asa 150, 300, 600, 900, 1500, 2500 action : manual, lever, gear operated with pneumatic actuator ends conn. : flanged ends but weld mfg. : bs 5351/b16.34 /api 6d-iso 14313/ api 609/mss sp 72 port : full & reduce application : air, gas, water, chemicals, pharma, oil, acid, steam, foods, vacuum, heat treatment ,paper & sugar industries testing : api 598 / bs 6755

• Color: Blue, Silver
• Structure: Control

Overload-proof through travel-dependent, electronic switching off in end position. With die-cast aluminium housing and yoke for valves with 40 mm stroke. Optional function with one auxiliary switch. With manual control. Additional info SKC..U, SKC..UA are UL listed. Control devices MK..6.. are control devices with safety shut-off function per DIN EN 14597.

DFPD is the new benchmark for quarter turn actuators. It can be used as an individual actuator or as part of a complete automated process valve system from Festo. With a torque range from 10 to 480 Nm, a rotation angle up to 180° and corrosion-resistant versions, the single- or double-acting DFPD is suitable for ball valves, butterfly valves or air dampers in the chemical, pharmaceutical and beverage industries, as well as for water treatment. Single-acting or double-acting Very compact Highly modular End position adjustable at both ends Optimised spring setting design For extreme temperatures: -50 … +150 °C Mounting plate for pilot valve in EU (G) and US version (NPT)

• Material: Stainless Steel

Ball valve actuator for industrial use, SS, Brass body, voltage range from 24,110,230,415

• Brand: Siemens
• Actuator Type: Linear
• Valve Motion: Linear Motion Valve
• Model Name/Number: SKP
• Voltage: 230 V AC
• Frequency: 50-60 Hz
• Temperature: -10 to +60 Deg Celsius
• IP Protection: IP54

• Type: Automatic
• Material: Aluminum, Brass
• Pressure: Medium Pressure
• Structure: Diaphragm
• Certificate: CE Certified
• Port Size: 1inch, 2inch
• Number Of Way: 2way, 3way

Actuators are used in control valves to control the pressure, flow, temperature and liquid level by partially or fully opening or closing the valves.

• Type: Gas Burner
• Packaging Details: Stanadard Corrugated Box
• Model Number: AR
• Place of Origin: Andhra Pradesh, India

• Type: Electric Valve Actuators
• Application: HVAC System
• Country of Origin: Made In Taiwan
• Brand Name: Honeywell
• Model No: ML7421B1023-E
• Usage: Industrial Use
• Warranty: 1 Year

• Brand Name: INTELLO
• Country of Origin: ITALY
• Material: m

na

A valve actuator is the mechanism for opening and closing a valve. Manually operated valves require someone in attendance to adjust them using a direct or geared mechanism attached to the valve stem. Power-operated actuators, using gas pressure, hydraulic pressure or electricity, allow a valve to be adjusted remotely, or allow rapid operation of large valves. Power-operated valve actuators may be the final elements of an automatic control loop which automatically regulates some flow, level or other process. Actuators may be only to open and close the valve, or may allow intermediate positioning; some valve actuators include switches or other ways to remotely indicate the position of the valve.

• Material: Aluminum
• Application: Gas Valve
• Pattern: Plain
• Pressure: Medium Pressure
• Certificate: ISI certified
• Port Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch
• Brand Name: Alco, American, Anson, Apollo, ASCO, Baker Petrolite, BEL, Bentley, Bettis, Carne, Cooper, Cameron,

We are offering actuator accessories automation accessories electric actuators electric limit switches solenoids and switches valves motor operators limit switches lock switches linear mechanical actuators linear electric actuators rotary geared actuators rotary mechanical actuators rotary pneumatic actuators rotary servo actuators pneumatic actuators position indicators positioners hydraulic actuators.

• Type: Automatic
• Material: Aluminum, Brass
• Pressure: Medium Pressure
• Structure: Butterfly
• Certificate: CE Certified
• Port Size: 1inch, 2inch
• Number Of Way: 2way, 3way

We are the distributor and wholesale suppliers of actuator product in all types and we supply this qualitative product in all over domestic market at competative price.

We have established for ourselves a distinguished stature in the industry by presenting to our clients an inclusive consignment of Series 70 Linear Valve Actuator. Product Details: Shock Resistance High functionality Long lasting Seamless built Rugged Perfect built

• Structure: Control
• Valve Motion: Rotary Motion Valve
• Model Name/Number: CN7220A2007
• Brand: Honeywell
• Voltage: 24 V DC
• Power consumption: 6 VA / 6 W
• Ambient operating limits: -20 to +60 deg. C

• Type: Automatic
• Material: Aluminum, Brass
• Pressure: Medium Pressure
• Structure: Butterfly
• Certificate: CE Certified
• Port Size: 1inch, 2inch
• Number Of Way: 2way, 3way

Rotolinear Systems offer linear Actuators. These actuators are with Ball screws or Lead screws depending on the application and normally with 12V DC /24V DC Motor + 110/230VAC converter + remote hand set. It is used for furniture, satellite, automation, dish antenna, fitness equipment, furniture’s, hospital equipment ect. The standard stroke available is upto 612mm and the Max Dynamic load carrying capacity is 800 to 8000N and Static around 13600N. The speed of ball screw driven linear actuator will 4.5- 65mm/ sec. The protection will be IP65; IP54 depending on the models and preset limit switches is included. The optional accessories like potentiometer, Hall effect sensors.

• Voltage: 230 V AC
• Actuator Type: Electric Actuator
• Brand: Belimo
• Model Name/Number: NFU-S2

• Material: CF8
• Temperature Range: 180 C
• End Caps: S/E
• Brand: JEKON
• Model Name/Number: 3 PCS 2 WAY BALL VALVE S/E
• Size: 15-50 MM

Technical Services for Valve & Actuator We are a leading name in the industry widely acknowledged for rendering excellent Technical Services for Valves and Actuators to our valuable patrons. We also render Valves Service and Electric/Pneumatic Actuators Service. These services are rendered by our team of expert professionals, who make use of high-grade tools and latest technology in the execution process. All our services are rendered in strict compliance to the industrial norms & standards. Technical Services for Valve & Actuator Troubleshooting Problem in valve /actuator analysis and recommendations. Root cause – failure analysis. Material testing resources. Cost Reduction Valves/Actuator substitution using alternate of the shelf design. Material substitution. Design modification.   ............................................................................................................................................................. Electric & Pneumatic Actuators Service Electric & Pneumatic Actuators Service (AMC'S) : We undertake under maintenance contract of various makes such as: Auma, Rotork, Marsh, Biffi, Limitorque, and all other Indian and International brands.    ............................................................................................................................................................. Overhauling Of Actuator We undertake overhauling for Actuators at our Autoflow Technical Center & at our site. Where we take following procedures : We dismantle each part of Actuator. Clean each part of Actuator. Change damage parts. We lubricate each part with proper grease. Service each part. Fix each part at its proper place. After checking of electric connections, we test actuators on ACTUATOR TEST BENCH ............................................................................................................................................................. Valve Service Backed by sound industry experience, we have been able to provide our customers with effective Valves Services. These services are rendered by our team members using latest tools and advent technology in the execution process. Makes: Tyco, Keystone, Metso, Bray, Fouress, Audco, Intervalve

• Actuation Type: Electrical
• Device Type: Rod Style
• Stroke: 20mm
• Maximum Torque: 600N
• Brand: Honeywell
• Power Supply: 24VAC, 50/60Hz
• Control Signal: 0-10 VDC

• Type: Automatic
• Material: Aluminum, Brass
• Pressure: Medium Pressure
• Structure: Butterfly
• Certificate: CE Certified
• Port Size: 1inch, 2inch
• Number Of Way: 2way, 3way

details : operable with rdg, sdg and adg generators as well as with an agm generator in combination with an external controller travel measurement, trigger / trigger potentiometer and depth detecting stop optionally retrofit designed for integration into special purpose machines compact construction rugged design for maximum durability .

Valves and ActuatorsWe have the privilege to offer a comprehensive range of Siemens Control Valve to our clients.Acvatix – the new comprehensive range for greater energy efficiencyWith Acvatix you decide for a comprehensive range of valves and actuators that stand for maximum control accuracy, energy efficiency and availability of HVAC and chiller systems.Our range is electrohydraulic actuators, with magnetic actuators or pressure independent combi valves – Acvatix significantly reduces energy consumption and thus operating costs.The extensive product range offers you valves and actuators with a long service life that meet any control or hydraulic requirements, when it comes to the generation, distribution and usage of heating or cooling energy.They are also ideally suited for district heating/cooling, steam or drinking water applications as well as modernizations or renovations.