Vane Shear Apparatus Dealers

The company has emerged as a prominent Manufacturer and Supplier of Vane Shear Apparatus. The Vane Shear Apparatus is meant for the soft and sensitive soils with shear strength less than 15 KNm2. Providing test results through careful control and compression, the Vane Shear Apparatus can work in the laboratory or fields. A small vane is to be pushed in the soil, with the controlled rotation measuring force needed for maximum resistance.

Quality being the sole concern, we offer functionally updated array of Vane Shear Apparatus that are quality assured and are corrosion resistant in nature. Our entire product range has high shear strength and is performance based. The Vane Shear Apparatus are known for their quality assurance.

Soft and sensitive soils whose shear strength is less than 15 KN/m2, the results are dependent on operator's skill. Even pushing the sample tubes in soil may cause some disturbance. Experience shows that carefully controlled compression test results can be related to figures obtained by pushing a small vane in the soil and rotating it at a controlled rate and measuring the force, required for maximum resistance. Vane Shear Test can be conducted in a laboratory or in the field.

• Type: Motorised
• Certification: CE Certified
• Application: Laboratory Use
• Brand Name: Alfa
• Display: Analog
• Voltage: 230 V
• Phase: Single Phase
• Speed: 1/60 RPM
• Sampling Tube Size: 38mm. i.d. & 150mm long

• Weight: 100-150kg
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Material: Metal

The company has emerged as a prominent Manufacturer and Supplier of Vane Shear Apparatus. The Vane Shear Apparatus is meant for the soft and sensitive soils with shear strength less than 15 KNm2. Providing test results through careful control and compression, the Vane Shear Apparatus can work in the laboratory or fields. A small vane is to be pushed in the soil, with the controlled rotation measuring force needed for maximum resistance.

• Brand Name: Quality Engineering Corporation
• Power: Electronic
• Condition: New, Good
• Country of Origin: Roorkee
• Features: Quality, Reliability and Efficiency

We have in our store Laboratory Vane Shear Apparatus for determining the shear strength of both remolded and undisturbed soils. Designed with utmost precision, our Laboratory Vane Shear Apparatus consists of a torque head adjustable in height to enable the vane to be lowered into the specimen. The apparatus comes with a container. Our Laboratory Vane Shear Apparatus is widely acclaimed for its quality, reliability and efficiency. We provide Laboratory Vane Shear Apparatus with a set of springs, each one of approx. 2 kg. cm., 4kg cm, 6 kg cm and 8 kg cm.

 Laboratory vane shear apparatus Hand operated : Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotating of the vane is by means of a hand wheel which operates a worm gear arrangement during upper end of calibrated torsion spring. Vane dia, rod dia, vane size & vane height    Specifications. The Vane Shaft is attached through the hollow upper shaft to a resetable pointer, which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque. A container for soil sample is also supplied, and a sampling tube of 38mm I.D. & 150mm long can also be used as container. Supplied with set of four springs, one each of approx. 2 kg.cm., 4 kg.cm., 6 kg.cm., and 8 kg.cm. Complete as above in a wooden carrying case.

Laboratroy Vane Shear Apparatus AIM 108   Application Shear Strength Measurement Industry Chemical/Process Agricultural

Vane Shear Apparatus, which is provided by us, is used to efficiently execute Vane Shear test that is conducted for obtaining the needed specimens, especially in those cases where the sampling tube has become the main reason for disturbance. The Vane Shear Apparatus is used for conducting shear strength present in the specimen of soil. Specifications Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS Specificationss. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgscm sq., 4kgscm sq., 6 kgscm sq. & 8kgscm sq. complete as above in a wooden carrying case. Features Of Vane Shear Apparatus Accurate execution of vane shear testDiscounted priceCompactDurable

Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electrically operated rate of rotating is 1/60 R.P.M. Suitable for operation on 230 V A.C. Single Phase which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgs/cm2, 4kgs/cm2, 6 kgs/cm2 & 8kgs/cm2 complete as above in a wooden carrying case

Laboratory Vane Shear Apparatus, Motorised consists of a special motor, adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electric motor turns the upper end of a calibrated torsion spring to give a rotation of 0.1 °sec. The vane shaft is attached through the hollow upper shaft to a resettable pointer which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque.

Consists of a torque head, adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electric motor which operates a worm gear arrangement turning the upper end of a calibrated torsion spring. The vane shaft is attached through the hollow upper shaft to a resettable pointer which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque.

Laboratory Vane Shear (Motorised) For Testing Lab    NAUGRALABS LABORATORY PRODUCT NAME: LABORATORY VANE SHEAR (MOTORISED) FOR TESTING LABNaugraLabs Laboratory Product Code: NLE-Export-114002 Description and Specification for Lab Tenders Laboratory Vane Shear (Motorised).  Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgs / cm sq. 4kgs/cm sq. 6 kgs / cm sq. 8kgs / cm sq. complete as above in a wooden carrying case. electrically operated rate of rotating is 1/60 R.P.M. Suitable for operation on 230 V A.C. Single Phase.   civil lab equipments manufacturers  Shear Testing Lab equipment manufacturers,exporters and Shear Testing Lab suppliers

This method is performed to take the specimen from the soil where sampling tubes cause problem. Its validity is proved where soils have shear strength in order of 15kNm2 or less. This test asks complete care and skill of operator.

• diameter: 38mm

Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgscm sq., 4kgscm sq., 6 kgscm sq. & 8kgscm sq. complete as above in a wooden carrying case.

We offer to our customers a high performing Vane shear Apparatus at a marketing leading prices. The vane shear test is an in-situ geotechnical testing methods used to estimate the undrained shear strength of fully saturated clays without disturbance. The test is relatively simple, quick, and provides a cost-effective way of estimating the soil shear strength; therefore, it is widely used in geotechnical investigations. Under special condition, the vane shear test can be also carried out in the laboratory on undisturbed soil specimens; however, the use of the vane shear test in in-situ testing is much more common.