Vertical Polypropylene Pump Dealers

POLY PROPLENE PUMPS Vertical Gland Less Seal Less Pumps, Similar in hydraulic design to any conventional centrifugal pump, it differ in, so far as restriction is provided , escaple by way of an overflow Connection in the upper pump body & return to the suction line

• Application: Water Treatment Plant, Effluent Treatment, Filter Press for dyes and chemicals etc.
• FEATURES: Can run dry due to absence of shaft seals, Easy to dismantle and re-assemble for maintenance etc.

AMTVPP � Series pumps are designed and manufactured by AMBICA MACHINE TOOLS to meet customer specific requirement with optimum standardization. It's a Vertical molded polypropylene corrosion resistant pumps.

• Brand Name: Vertical Polypropylene Sump Pumps

We offer vertical polypropylene sump pumps. Being a well established-organization, we are engaged in manufacturing, exporting & supplying a distinguished range of vertical sump pumps. Our offered pumps are intricately designed under the vigilance of skilled professionals using quality tested raw material and sophisticated technology in line with the international quality standards. Clients can avail this range in various designs, shapes and sizes at market leading price within given period of time. reliable engineers are expertise in manufacturing of vertical sump pumps, design of pump is sturdy and parts are with long life, manufacturers & exporters vertical sump pumps. submerged vertical centrifugal pump: reliable vertical pumps are centrifugal type of single stage with semi open impellers at bottom. Handling liquids, containing solids, have a tendency to polymerize or crystallize special features: no mechanical seal stuffing box required all the wet parts are in p.p. & teflon construction with stand corrosion & erosion. no foot valve required to lift from negative suction no. Leakages problem just like gland or mechanical seal normal maintenance easy alignment heavy duty bearing bracket. centrifugal, quiet, vibration free in m.s. Or s.s. Pump shaft are en-8 or ss-316 impeller are semi-open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides in p.p. Pump shaft are quoted with p.p. Sleeve supported in upper part by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush specifications: ----- up to 40 mtrs material of construction flow up to 50 m3 hr ------ motor hp 1hp to 20 hp poly propylene, m.s., c.i., s.s. application: chemical industries petrochemicals refineries fertilizers

operation advantages of glandless pump:- the recognizable leading improvement is the deletion of problems get to your feet from the use of powered seal, insulation box and inside bearing. the aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent. the glandless pumps lend itself to process incorporating automatic control of a pump discharge valve. The "controlled leakage" acts as an integral by-pass. The pump suffers no ill effects if the discharge valve is partially or fully closed. the maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving.   sailent features of vertical glandless pump no mechanical seal, stuffing box and internal bearings provided. no maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal bearings. reduction of downtime production losses in view of above features. all the wet-end parts are in solid molded construction to with stand corrosion and erosion. the impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids. pump mounted outside the suction tank and is not submerged type. polypropylene are manufactured by solid injection molding process with high pressure hence. temperature resistance pp 50º to 80 º c pph 90 º to 100 ºc pvdf 100º to 115ºc

• Country of Origin: India
• Material: Polypropylene And PVDF
• Application: Water Use
• Color: White, Red
• Pressure: High Pressure
• Feature: Good Quality
• Brand Name: Aeron
• Phase: Single/three Phase
• Phase: Single & Three Phase

Aeron Engineering high quality, Polypropylene Vertical Submerged Pump Manufacturer. We deliver pumps that provide all services for chemical pumps requirement to many industries including military, mining, aerospace, pulp and paper, petroleum and chemical. For years, our company has been a producer of pp-pump, an Industrial polypropylene pump for severe duty, high pressure, and high tolerance applications. Our Company has achieved specialization as a leading Manufacturer and Exporter of all types of pumps from India. Our company is dyed-in-the-wool in manufacturing first-class quality PP Pump, Polypropylene-Pump, Poly Propylene Pumps and Non-metallic Pumps to cover the Indian as well as Export markets. All our PP Pumps are measured with high-quality standards to cover all types of applications and service support. Our company offers you various ranges of industrial pp pumps for all your chemical process handling requirements. Our strength is excellence produced at inexpensive values, prepared delivery and the unflinching assurance to excel. Choose us and get our products we are a trusted PVDF vertical submerged pump manufacturer.

• Pressure: Up to 5 kg / cm2
• Application: Effluent Treatment, Filter Press For Dyes And Chemical, Water Treatment Plants, Scrubbing Corrosive, Food processing, Drugs And Pharmaceuticals, Fertilizer Plants, Pickling Plants.
• Brand: Gipfel Engineering
• Head: Up to 60 Mtrs
• Capacity: Up to 70 m3 / hr
• Temperature: Up to +140 Deg C
• Speed: 960 / 1450 / 2900 RPM at 50Hz & 1150 / 1750 / 3500 RPM at 60Hz
• Hardware MOC: P.P. (Polypropylene), PVDF, UHMWP

• Material: Polypropylene
• Shape: Vertical
• Color: Yellow, White, Red
• Condition: New
• Automatic Grade: Semi Automatic, Manual, Fully Automatic

In Industries like Conc. Hcl loading & unloading of road tanker. Scrubbing of corrosive gases like Cl2, Br2, F2, I2, SO3, CO2, NH3 Water Treatment Effluent Treatment Electro Plating Pickling in Steel Rolling Mills Descaling VPump body in Stainless Steel. Impellers & Diffuser in polycarbonateNoryl. Motor shaft in stainless steel AISI 420. Flanges suction & discharge mountings in grey cast iron. Mechanical seal in graphite and ceramic. Motor housing in Aluminum.

• Speed: up to 3500 rpm
• Size: 25 mm to 100 mm

Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards.In polypropylene pumps high alumina ceramic sleeve is used to protect shaft from any type of corrosion and abrasion. Mechanical seal prohibit the leakage from the pumps and best cast iron heavy duty oil lubricated bearing housing helps for achieving maximum strength of pumps.

• Flow Rate: Up to 47m³/hr
• Max Head: Up to 2.8 bar
• Outlet Sizes: DN20 – DN100
• Max Temperature: 92 oC
• Usage: Industrial
• Strength: Long functional life

STRYKER series vertical PP pumps can be used in any installation or specially where the saving of space is important factor or mechanical seal not required. These pumps are designed for use where the liquid handled to be of highly corrosive nature or where non-adherence of product or zero metallic contamination is must. These pumps are equally ideal for continuous or intermittent service for handling corrosive as well as ultra pure chemicals without fear of corrosion or contamination. All components in the wetted end of the pump are molded of engineered plastic. These pumps are not only less costly than high alloy or exotic metal pumps, but they may be used safely in service where metal pumps are completely inadequate.   Special Features Bearing free design for handling abrassives in solutions. Motors are flange mounted Single or Three Phase TEFC from 1 HP to 10 HP. Epoxy / Polyurathene paints are used on metallic Bearing Housing. No metal in contact with solution. No danger of Corrosion or contamination. Heavy plastic sleeves isolates steel shaft from liquid being pumped. Radial vanes on backside of impeller increase flow of fluids through the sleeve bearing preventing overflow at top of column. Lubrication of bearings by product itself or by fresh water. All models operate at 1450 rpm / 2900 rpm. Specially designed vapour seal provided to protect bearing form corrosive fumes. Dynamically balanced impeller made from glass-filled reinforced engineered plastic. Bearings of High Allumina Ceramic Sleeves. Purity 99.5%. These pumps are in extensive use in the fields of Pollution Control open tank. Filtration Transferring Corrosive Chemicals Slurries Plating Bars Sewage Waste Water Treatment Plant.

• Voltage: 200 - 415 V
• Material: PP
• Motor Speed: 1400 rpm
• Accuracy: +/-1 %
• Motor Horsepower: 3 HP
• Motor Phase: Three Phase

The Vertical Chemical Process pump is comparable hydraulic design to any conservative centrifugal pump. It differs in so far as it is always mounted in the vertical position. A limit is provided above the impeller and necessitate for any from of liquid seal is obylated by allowing a small leakage to escape by way of an overflow connection in the upper pump body return to suction vessel. The best option method of installation will relly upon the pumping application. Most effective and most widely adopted approach is to mount the pump near the give supply tank at such a level that the impeller is flooded and the Vertical Chemical Process pump consequently pumped when the liquid reaches a certain height in the tank. The pump will deliver liquid until the suction pipe becomes exposed , when it will run dry until the chemical level is restored to the point where re-printing can take place, this cycle of procedure may be repeated for an indefinite period.

Pump is similar hydraulic design to any conventional centrifugal pump. It differs in so far as it is always mounted in the vertical position. A restriction is provided above the impeller and need for any from of liquid seal is obylated by allowing a small leakage to escape by way of an overflow connection in the upper pump body return to suction vessel. All the wet-end parts are in solid molded construction to with stand corrosion and erosion. The impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids.

Polypropylene Process Pump, Design of pump is sturdy and parts are with long life, manufacturers & exporters Polypropylene Centrifugal Process Pump, pp centrifugal pumps are used for handling highly corrosive chemicals in process industries, pumps are provided with Teflon gland or mechanical seal as per requirement, All wetted parts are made from high pressure moulded polypropylene. Shaft 316,protected by shaft sleeve of alloy or alumina filled PTFE or ceramic, Back pull out casing, very easy for maintain, Heavy duty casted bearing housing.

• Payment Methods: Cash, COD, DirectDebit
• Advantage: Low power consumption, High Capacity, Enable effective solutions
• Motor Power: 1 HP to 5 HP
• RPM: 2900 RPM & 1450 RPM

• Size: 25 x 25

Phosporic acid plants, Gas washing plants, Rayon plants, caustic joda plants for corrosive acids & basics, effluent treatment handling.Due to constant R & D activity, details are subject to change without prior notice.

Heavy duty engineered polypropylene sump-pump for primery effluents / corrosive liquids and scrubbing systems. Zero maintenance pumps, eliminates the need for gland packing and seal Leak proof and can run dry without damage of rotating parts Pumps to be mounted out side the suction tank in vertical position and not to be submerged Vertical gland less pump, similar in hydraulic design to any conventional centrifugal pump, it differs in, so far as restriction is provided, escape by way of an overflow connection in the upper pump body & return to the suction line Preferred selection for E.T.P. Plant because of seal less design Pump is seal less hence can run dry Minimum component makes maintenance easy Low maintenance cost and prolong life Ideally recommended for transfer of treated effluent No mechanical seal / glands, hence pump can run dry Low maintenance cost and easy to maintain M.O.C. PP - UPTO 550- 600 C PPH - UPTO 90 01000 C PVDF - UPTO 100 0 - 1100 C We are fully committed to providing the finest pumps, the best engineering, the most effective customer service & the greatest after sales support possible.