Waste Heat Boilers Dealers

ENERGYPACK designed & developed waste heat recovery system from DG set exhaust gas, Incinerator flue gas exhaust, Sulphuric acid & nitric acid plant & supplied  waste heat recovery boilers to HOCL  Rasyani, High explosive  Factory  Pune, Century Rayon Shahd, Ganesh Benzoplast Ltd Boisar, African fertilizers & chemicals Ltd AFRICA. Sizes will be as per the client specification maximum up to 36 kgs/cm sq pressure boiler manufactured.

Waste Heat Recovery Boiler is thermostatically balanced and is used in varied industrial segments. It caters diverse requirements for heating applications. We have emerged as a trusted Manufacturer and Supplier of Waste Heat Recovery Boiler from Maharashtra, India. The Waste Heat Recovery Boiler that we offer is abrasion resistant in nature and is delivered as per the requirements of the customers. Our Waste Heat Recovery Boiler is highly efficient and is known for its low maintenance cost.

• BLUE: 1500000

3 tonne pkg boiler with wwm complete with cyclone id fan/fdfan,feed pump etc.

• Dryness Fraction: 98.5 %

Forbes Marshall Exhaust Gas Waste Heat Recovery Boilers (WHRB) are fully packaged smoke tube industrial boilers equipped with advanced instrumentation to deliver maximum possible heat recovery. These boilers are ideal to recover heat from gen sets, incinerators, blast furnace exhausts etc. They enhance the system efficiency and help save fuel and money.

The standard refuse (or waste) recovery boiler incinerates solid or liquid waste products. This boiler type is not to be mixed with the recovery boilers used in pulp and paper industry. Therefore, we willalways refer to refuse boilers when talking about waste and recovery boilers when we mean the specific chemical recovery process used in the pulp and paper industry. The combustion of waste differs radically compared to other fuels mostly due to the varying properties of waste. Also, the goal when combusting waste is not to produce energy, but to reducethe volume and weight of the waste and to make it more inert before dumping it on a refuse tip.Details : Waste is burned in many ways, but the main method is to combust it in a grate boiler with a mechanical grate Other ways to burn waste is to use a fixed grate furnace, a fluidized bed for sludge or rotary kilns for chemical and problematic waste. Waste is usually mass burned, i.e. it is burned in the shape it was delivered with minimal preparation and separation. The main preparation processes are grinding and crushing of the waste and removal of large objects (like refrigerators).  Waste has to be thoroughly combusted, so that harmful and toxic components are degraded and dissolved.

• Weight: 100-1000kg
• Warranty: 1year
• Capacity: 0-2Tph
• Material of Construction: Metal
• Range (Kilogram Per Hour): 500
• Volatge (Volt): 300

Features : Easy maintenance. Economical electric consumption. High radiation heat transfer.

• Voltage: 240 V
• Style: Horizontal
• Power Source: Electric
• Automation Grade: Automatic
• Usage/Application: Industrial

• Pressure Range: 10.5 kg/cm²g to 25 kg/cm²g

Vertical self cleaning design for easy operational convenience.Great operational safety.Avoids high Dust concentration in gases.Large steam space- Dry Steam Quality.By passing of gases is avoided, has flue gas path.Horizontal packaged three passes.Dispensing with special foundations.Ample steam storage space ensuring uniform steam pressure without priming.

• Fuel Type: Oil Fired
• Material: Mild Steel
• Working Pressure: 5-10 Kgs/cm2
• Phase: 3 Phase
• Voltage: 415V
• Capacity: 1000-2000 Kg/hr
• Brand: Thermodyne
• Automation Grade: Automatic
• Temperature Range: 90 Deg C
• Efficiency: 88 +- 2%

• Phase: 1
• Material of Construction: SS & Mild Steel
• Range (Kilogram Per Hour): 500
• Volatge (Volt): 300

We are the leading manufacturers, exporters and supplier of this products.

Thermax manufactures hot water boilers in the range of 50,000 to 90,00,000 kcal per hour. The hot water boilers are designed to operate on various types of fuels such as heavy oil, light oil, gas, duel fuel, coal, husk and other agro waste fuels. The three types of hot water boilers, manufactured at our unit, are Aquamatic, Aquatherm and Thermocontainers.

• Dimensions: 35 m x 6.5 m x 6.5 m

Waste Heat Recovery systems supplied for various licensors with thermal as well as mechanical guarantees. No. supplied: 15 Dimensions: 35 m x 6.5 m x 6.5 m, Weight: 2700 MT WHB package Supplied to JGC for Bazan Project, Material: LAS, CS

Manufactured in both Smoke Tube and Water Tube Type Construction. Natural or Forced Circulation Type Configuration is possible. WHRU system is designed based on the Waste Gases Type and other Basic Design Parameters, Hence Reliable Operation. Smoke chambers are lined with castable refractory material to protect the inside surfaces. Simple arrangement of smoke chamber door fixing, facilitate easy periodical tube cleaning. Finned Tube Construction is available in water tube forced circulation Waste Heat Recovery arrangement, makes the WHRU compact. Steam Heat Recovery Boilers ar available in both Bi-Drum and Single Drum type arrangements. Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. Steam Quality is better as Properly Designed Drum Internals are Provided. Provided with accessories like Super Heater, Economiser, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc.

Fuel is money. The more fuel we burn in a boiler, the more money is spent. Hence even a few per cent saving in fuel bills amounts to huge savings annually. Due to this, we provide novel products like Waste heat recovery boilers. As the name suggests, the heat going waste from the process like flue gases of Diesel Generator sets is utilized in these boilers to generate hot water or steam. Since no fuel is fired, whatever heat we recover in the boiler is free of cost. These boilers are designed to recover heat from waste flue gases from DG exhaust, Furnace exhaust, Kiln exhaust, incinerator exhaust etc. to produce steam or hot water based on the application requirements of the plant. The amount of steam generated or of heat transferred is controlled by the quantity of heat available in the flue gases. These can be fire tube or water tube type as per the design requirements. Tailor-made solutions are offered based on specific requirements of customers and the boiler design is integrated into the system requirements. Since these boilers operate on waste heat, there are no fuel bills to operate these and hence they offer very handsome pay-back of investments. Capacity Range These are offered in tailor-made capacities as per requirements.

• Port: Mumbai

. The more fuel we burn in a Steam boiler, the more money is spent. Hence, even a few percent saving in fuel bills amounts to huge savings annually. Due to this, we provide novel products like Wastetherm, the Waste Heat Recovery Boilers. As the name suggests, the heat going waste from the process like flue gases of Diesel Generator sets is utilized in these boilers to generate hot water or steam. Since no fuel is fired, whatever heat we recover in the boiler is free of cost.

Single Drum, Natural Circulation: Bottom Top Supported Design, Horizontal Vertical Self-cleaning Design for greater operational comfort, Design takes care of high dust concentration in gases, Gas tight Water Wall Furnace, Machine-welded membrane panel, Membrane panels provide gas tight enclosure for better efficiency of boiler & minimum refractory.

We provide Waste Heat Recovery Boilers ( WHRB ) / Steam Generators on Natural Gas / Bio Gas /HFO /FO/ HSD based Engines/Turbines and Waste heat coming from different processes like GLASS Furnace exhaust, Melting Furnaces Exhaust, Cement Kiln Waste Gases. The Huge Power Cost Hike and increase of power demand in Industry segment we all has to take each and every chance to trap the waste heat and generate steam possibly for Combined Power Plant or for process steam/Hot water application. The waste heat recovery project is viable only depending on the investment recovery period. We THERMIN ENERGY SYSTEM are very well know this fact and are designing/manufacturing/supplying the systems which gets maximum possible monitory outputs and in minimum time frame. THERMIN ENERGY SYSTEM offers Smoke Tube and Water tube Boilers for such applications. The Systems offering are totally customized turnkey solutions.

We are offering Waste Heat Recovery Boilers. the unmatched quality and inexplicable performance at respective applications has attracted various national as well as international clients to place huge and repeated orders for the industrial waste heat recovery boilers. moreover, the materials used in the manufacturing of the waste heat recovery boilers are of flawless quality that further ensures high durability and resistivity to various situations favoring corrosion. customers are also eased with the accessibility of the waste heat recovery boilers that are designed with all the latest techniques at the most reasonable prices.

We Design and Supply of Steam Generators on Natural Gas / Bio Gas / HFO / FO / HSD based Engines/Turbines and Waste heat coming from different processes like GLASS Furnace exhaust, Melting Furnaces Exhaust, Cement Waste Gases and Steel Furnaces. The huge power cost hike and increase of power demand in industry segment we all has to take each and every chance to trap the waste heat and generate steam possibly for Combined Power Plant or for process steam application. The waste heat recovery project is viable only depending on the investment recovery period. We "THERMIN" are very well known this fact and are designing/manufacturing/supplying the systems which gets maximum possible monetory outputs and in minimum time frame.  

Nuberg HFD supplies ultimate Waste Heat Recovery Boiler energy solutions to handle waste heat produced from different processes and applications to improve balance in minerals, oil and gas, ferrous metals, non ferrous metals, glass, cement and other domains. The solutions include a wide array of customized turnkey solutions to produce heat, steam as well as power. Over the year, since our inception we have harnessed the ability to offer wide-ranging solutions and a standing for accomplishing innovative projects with the help of our wide application knowledge. At present, based on technology developed and continually refined by Nuberg HFD, waste heat recovery boilers (WHRB) are integrated into about 50 applications in different sectors with a worldwide installation base of more than 500 boilers.

• Material: Mild Steel
• Working Pressure: 7 Kg/cm2
• Feature: Suitable for steam fluctuations , High thermal efficiency, Better arrangements for cleaning for tubes.
• Capacity: 1Ton/he
• Surface Finishing: Paint Coated
• Rust Proof: Yes
• Fuel: Waste Heat

• Material: Mild Steel
• Working Pressure: 5-10 kg/Sq.cm.g
• Finishing: Paint Coated
• Fuel: Husk Fired
• Capacity: 1000-2000 kg/hr
• Style: Vertical
• Automation Grade: Automatic

• Country of Origin: India
• Operating Type: Automatic
• Driven Type: Electric
• Voltage: 220V
• Working Temperature: 70-100 Degree C
• Power: 1-3kw
• Specialities: Low Maintenance, Durable
• Working Pressure: 17.5 Kg/cm2
• Capacity up to: 8000 Kgs/hr

We design and manufacture an air preheater (APH) to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process.The purpose of the air preheater is to recover the heat from the flue gas which increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. These are having applications in pharma,chemical and food industries.

These boilers are ideal to recover heat from gen sets, incinerators, blast furnace exhausts etc. They enhance the system efficiency and help save fuel and money.

• Advantages: Quick start up Self supporting construction Low pressure variations at turndown

Uttam provides custom-engineered Waste Heat Recovery steam generation solutions for many industries. These boilers use the waste heat energy in flue gases to generate steam. These boilers are designed and built for low maintenance and high reliability.

Waste heat boilers are in fire tube construction with integral space and separate drum for clean and non corrosive gas application. CI gilled tube construction will be used for corrosion gas application like in sulphuric acid plant. Bare tube construction in Horizontal and Vertical modular construction. steel finned tube construction also used to make equipment compact. Rotary and Retractable soot blowers are used for cleaning the heating surfaces. Wherever sticky gases are their, mechanical cleaning system will be used.

• Working Pressure:: Up to 69 Kg/Sq.Cm.

We are amongst the leading names in the industry, offering a wide array of Waste Heat Boilers. Our entire product range is thermostatically balanced and is used in varied industrial segments. They cater diverse requirements for heating applications. Our entire product range is abrasion resistant in nature and is delivered as per the requirement.