Water Bath Incubator Shaker Dealers

• Code: 12027
• Temperature Range: Above Ambient 5ºC to 80ºC.
• Resolution: 0.1ºC
• Inner Chamber Size of Bath: 375mm L x 300mm W x 150mm H
• Shaking Tray Size: 300mm L x 250mm W x 100mm H
• Inner Chamber Size of Bath: 600mm L x 325mm W x 165mm H
• Shaking Tray Size: 500mm L x 250mm W x 100mm H
• Display Type: Digital
• Body Material: Stainless Steel
• Use in: Laboratory

A constant temperature as well as uniform shaking bath for a wide varieties of applications not involving memo metric measurement such as incubation of Tissue slides and homogenates, protein coagulation, aerobic and anaerobic studies of Tissue Slices and homogenates it atmosphere of various gases or mixture of gases. The bath is double walled inside made of Stainless Steel and outside Mild Steel Sheet and painted in Epoxy Powder Coating. The bath has an oscillating tray riding on ball rollers and oscillated by a Governor controlled variable speed motor, shaking speed range is 40 to 140 cycles per minute. The temperature is controlled by Hydraulic type Thermostat from few ºC above ambient to 70 º C with maximum temperature 100 º C. sensitivity plus minus 0.5º C. A "L" shape thermometer mounted on front panel is calibrated from 0º C to 110º C. in one degree division. Unitized controlled panel has individual switches for heater's knob reference dial for repeat thermostat setting, control of shaking speed and two pilot lights which indicate heater cycle as well as mains, with 1000 watts immersion element. The bath is complete with one shaking tray, one large gabble cover made of Stainless Steel for overall bath, connecting cord plug for operation on 220/230 volts but without racks and glassware.    

• Power Source: Electric
• Temperature: 37 deg C
• Portable: Yes
• Operation Type: Continuous
• Automation Grade: Semi-Automatic
• Customisation: Yes
• Glass Viewing Window: Yes
• Circulation Pump: Yes

Specifications : Inner chamber and outer body of SS 304 Heating up to 95°C Digital Temperature Indiacator cum Controller with precise accuracy of ±1°C A Shaking speed range from 40 to 180 strokes special pyramid type cover provided avoids per min Supply: 220-240 Volts 50 Hz Single Phase

• Frequency: 50 Hz
• Material: Aluminum
• Voltage: 220V
• Brand: Penta

We offer Water Bath Incubator Shaker that is useful for studies on tissue metabolism, enzymes, protein coagulation and other experiments; demanding shaking at constant speed under controlled temperature conditions. We offer Water Bath Incubator Shaker, which has double walled construction; inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steel duly finished in stoving enamel paint. The lid is made of stainless steel. The gap in our Water Bath Incubator Shaker, between the two chambers is filled with glass wool to prevent loss of heat. Details : The temperature in the Water Bath Incubator Shaker is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90oC+ 0.5oC. The shaking mechanism in Water Bath Incubator Shaker is fitted with variable speed motor couple to shaking tray working on rollers. Shaking speed is controlled from tray working on rollers. Shaking speed is controlled from 40 to 140 cycles per minute. Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity. Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc. L-shaped thermometer is provided to indicate inside temperature. Equipment to work on 220V AC 50Hz single phase. Optional : Microprocessor Thermostat �EGO�/�JUMO� german with the accuracy of 0.5oC Digital Temperature Indicator Digital Temperature Indicator- Cum- Controller Microprocessor PID Digital Temperature Indicator � Cum- Controller Shaking tray for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or conical flaks Minimum Order Quantity : 25 Pieces

We are counted amongst the distinguished Manufacturers and Suppliers of Water Bath Incubator Shaker. We carry out our operations from Haryana, India. Our offered Water Bath Incubator Shaker is known for its optimum functionality, great performance, dimensional accuracy, and long service life. It is precisely engineered by our adroit professionals, who thoroughly abide by the latest industrial standards and norms. We are competent to take bulk orders for it. We offer it at a highly affordable price.

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)   Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions.   Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint.  The lid is made of stainless steel.  The gap between the two chambers filled with glass wool to prevent loss of heat.   The temperature is achieved by superior immersion heater and is  controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.    Shaking speed is controlled from tray working on rollers.  Shaking speed is controlled from 40 to 140 cycles per       minute.  Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity.   Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc.   L-shaped thermometer is provided to  indicate inside temperature.  Equipment to work on 220V AC 50Hz single phase.   Shaking Tray Size (Stainless Steel)       Capacity   a. 275x275x150mm                                    12ltrs. b. 405x300x150mm                                    18ltrs.    Optional :-   i)             Digital Temp. Indicator. ii)            Digital temp. Indicator- Cum- Controller. iii)            Microprocessor PID digital temp. Indicator – Cum- Controller. iv)           Shaking tray  for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or Conical               flaks.   

Water Bath Incubator Shaker (Metabolic Shaking Incubator) having temperature range from room temperature to 95°C. It has thermostatic control with an accuracy of ±1°C. Double walled, inside made of stainless steel and outside mild steel sheet, painted in epoxy powder coating, oscillating tray is riding on ball rollers. The shaking speed range 40 to 140 r.p.m. and shaking tray can hold either test tubes or flask of 25ml, 50ml, and 100ml. It is ideal to work on 220/230 volts A.C. without R.P.M. Indicator. OptionalDigital temp. IndicatorDigital temp. Indicator �cum-ControllerMicroprocessor PID Digital Temp. Indicator-cum-ControllerShaking tray for 25ml, 50ml, 100ml, 250ml, 500ml, 25mm dia. Test tubes or conical flasks

• Brand Name: Radical
• Model Number: RSTI-140
• Place of Origin: Ambala Cantt

Water Bath Incubator Shaker RSTI-140 Series Similar to other water bath but fitted with inbuilt shaker for different experiments demanding shaking at constant speed under controlled temperature conditions. The temp. Is controlled by capillary type thermostat from ambient to 100°C. RPM range: - 40-140 with variable electronic speed regulator workable on 220V AC 50 Hz Single Phase. Inner Chamber Sizes are available · 275x275x150 mm · 405x300x150 mm Optional:- 1. Microprocessor PID digital temp. Indicator cum controller. 2. Digital RPM meter 3. Auto cut off device when water level is low.

This is a desktop model designed for studies on tissue metabolism, enzymes and protein coagulation or other experiments requiring shaking of subject matter at constant speed under controlled temperature environment.The basic construction is double walled with 100% leak proof inner chamber of thick polished Stainless Steel sheet & has smooth inside working surface. The Outer body is made of mild steel duly powder coated. The lid made of thick polished Stainless Steel sheet prevent failing of condensed water droplets on the specimens. The space between the two walls is packed tightly with high grade glass wool to prevent loss of heat and ensure constant temperature. Heating is achieved by a high quality immersion type heater and temperature is controlled by capillary hydraulic type thermostat from ambient to 100°C ± 0.5° C. The shaking mechanism comprises of variable speed motor fixed on the left side and coupled to the shaking tray which shakes linearly to and fro on ball rollers moving in guides which are greased for smooth motion. The shaking speed can be controlled between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or flasks of 25 ml or 50 ml or 100 ml capacity as ordered by the users. Front panel includes switches to ON/OFF mains, rpm regulator and Indicators. It also includes thermostat control knob, Speed control knob, and L-shaped thermometer to indicate the inside temperature.The incubator is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available). W    X   H    X   D 275 × 275 × 75 mm        275 × 275 × 150 mm  400 × 300 × 150 mm   

• Material: Stainless Steel
• Application: Laboratory
• Color: Grey
• Voltage: 110V
• Frequency: 50-60 Hz
• Power Source: Electric
• Automation Type: Semi Automatic

Optional : Digital temp. Indicator-cum-controller Microprocessor PID digital temp. Indicator-cum-controller with timer Digital temp. Indicator shaking tray for 25ml, 50ml, 250ml, 500ml, 500ml & 25mm dia.test tubes or conical flasks.

We have been manufacturing Water Bath Incubator Shaker for a long time using cutting edge technology. We are supplying and exporting Water Bath Incubator Shaker to the various hospitals, dispensaries, nursing homes, research centers, etc. On regular basis. Thus, we are reckoned as one of the noted manufacturers of Water Bath Incubator Shaker in the country. Attributes Double walled constructionInner made of thick S.S. SheetOuter made of M.S. Sheet duly enamel paintedS.S. Made paramedical lid prevents falling of condensed water droplets on the specimensAvailable with immersion type heaterEGO/JUMO GERMAN hydraulic type thermostat with an accuracy of + 0.5o fpr controlling temperatureOscillating tray riding on the brass rollersShaking speed range is between 40 to 140 cycles per minuteShaking tray for holding test tubes or Erlenmeyer flasks of 25mlk or 50ml or 100ml or250ml or 500ml or 1000mlAvailable with L shaped thermometer cord and plug, to work on 220/230 volts A.C. SupplyHeating arrangement ranging from ambient to 100°CHeating and cooling arrangement available with temperature range from 5o to 100oC Inside Size Temp Ambient To 100oC Temp 5oC To 100oC 275 x 275 x 75mm275 x 275 x 150mm405 x 300 x 150mm.

Details : Ideal for reliable steaming/ evaporation. Fitted with a water level indicating device and a removable flat drop on lid for concentric rings that enables the bath to be used for other work also. Control accuracy of ± 1°C in Digital Mode. Full Stainless Steel Construction with energy efficient long  life heaters. 6 holes of 75 mm Φ with steps of 25 mm 12 holes of 75 mm Φ with steps of 25 mm 24 holes of 75 mm Φ with steps of 25 mm

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator) Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions. Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint. The lid is made of stainless steel. The gap between the two chambers filled with glass wool to prevent loss of heat. The temperature is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.

• Material: Metal
• Application: Industrial
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Rs00s0127 water bath incubator shaker (metabolic shaker) desktop model designed for studies on tissue metabolism, enzymes and protein coagulation or other experiments required shaking of subject matter at constant speed under controlled temperature environment. It is a walled unit inside made of thick s.s. Sheet and outer of m.s. Sheet duly powder coated. The paramedical lid of s.s. Prevents falling of condensed water droplets on the specimens. Heating is achieved through an immersion type heater and the temperature is controlled by digital temp. Indicator cum controller with an accuracy of â± 0.5â° c, the bath has an oscillating. Tray riding on ball rollers oscillated through a geared variable speed motor shaking speed range is is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or erlenmeyer flasks of 25 ml or 50 ml or 100 ml or 250 ml or 500 ml or 1000 ml. As per ordered by the users. (kindly the capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, co and plug, to work on 220/230 volts a.c. Supply available with heating arrangement only (having temperature range from ambient to 100â°c,) or with both heating and cooling arrangements (having temperature range from 5â°c, to 100â°c) size inside a 275 x 275 x 75 mm b 275 x 275 x 150 mm c 405 x 275 x 150 mm

• Condition: New
• Power Source: Electric
• Material: Stainless Steel
• Power: 220 volt 50Hz AC
• Temp.range: 90ºC.
• Finish: Polished

Temp.range from ambient to 90ºC. This is double walled unit inside make to thick S,S. sheet and outside M.S. power coated , supplied complete with shaking tray, water bath cover to work on 220 volt 50Hz AC supply.

Water Bath Incubator Shaker : Alpha Chem is manufactures,exporter & suppliers Water Bath Incubator Shaker. Water Bath Incubator Shaker :(Metabolic Shaking Incubator) Temp. Range from ambient to 90°C. This is double walled unit inside made of thick S.S. Sheet and outside M.S. Power Coated, supplied complete with shaking tray water bath to work on 220 volt 50Hz A.C. Supply. Shaking Tray Size (Stainless Steel) Capacity 275x275x150mm 12 ltrs. 405x300x150mm 18 ltrs. Optional:- • Digital Temp. Indicator. • Digital temp. Indicator- Cum- Controller. • Microprocessor PID digital temp. Indicator-Cum- Controller. • Shaking tray for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or conical flaks.

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)   Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions.   Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint.  The lid is made of stainless steel.  The gap between the two chambers filled with glass wool to prevent loss of heat.   The temperature is achieved by superior immersion heater and is  controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.    Shaking speed is controlled from tray working on rollers.  Shaking speed is controlled from 40 to 140 cycles per       minute.  Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity.   Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc.   L-shaped thermometer is provided to  indicate inside temperature.  Equipment to work on 220V AC 50Hz single phase.   Shaking Tray Size (Stainless Steel)       Capacity   a. 275x275x150mm                                    12ltrs. b. 405x300x150mm                                    18ltrs.    Optional :-   i)             Digital Temp. Indicator. ii)            Digital temp. Indicator- Cum- Controller. iii)            Microprocessor PID digital temp. Indicator – Cum- Controller. iv)           Shaking tray  for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or Conical               flaks. 

• Voltage: AC 220V
• Frequency: 50 Hz
• Temperature Range: 20-99deg C
• Temperature Increment: 1-4deg C/min

It is a double walled unit with inside made of thick S.S. sheet and outer made of M.S. Steel duly powder coated prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by microprocessor PID controller with an accuracy of ± 0.5°C. The bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or erlynmeyer flasks of 25 ml or 50 ml or 100 m or250 ml or 1000 ml. as ordered by the users. (Kindly mentioned the capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from ambient to 100°C) or with both heating and cooling arrangements (having temperature range from 5°C to 60°C).

For procedures requiring constant temperature,uniform shaking and controlled atmosphere. Double walled, inside stainless steel, Outer made of CRC/G.I.-Powder coated, glasswool insulation.Temp. control by Dual Display Microprocessor Based Digital Temp. Controller from 5°C above ambient to 100°C ± 1° C. Continuous shaking is controlled by a geared driven mechanism. The bath has an oscillating tray, riding on ball rollers and drive motor with variable speed control. Shaking speed is 40 to 140 cycles per minute. Teflon coated shaking rack highly resistive to heat and chemical. Optional Accessories Shaking racks for 25 ml / 50ml / 100ml / 250ml / 500ml / 1000ml flasks, interchangeable Test tube rack for 25 mm dia X 35 nos. test tubes Dual Display Digital Timer with alarm Programmable microprocessor based dual display digital temperature controller Digital speed meter to indicate RPM/ Oscillation

• Feature: Constant Temp.
• Applications: Bio-Technology laboratories, Micro Biology laboratories, Physics laboratories, Chemistry laboratory.

Waiometra Water Bath Incubator Shaker is based on the principle of constant shaking under highly controlled temp. conditions generated through hot steam.   An Ideal equipment suitable for mixing the samples by shaking with heating in research Institutes and Pharmaceutical Industries & Laboratories. Industrial Applications Micro Biology Clinical Biotechnology Medical  

Our Water Bath Incubator Shaker has a temperature range from ambient to 90oC. Water Bath Incubator Shaker is a double walled unit whose inside is made of thick S.S. sheet and outside is made of M.S. powder coated. Our Water Bath Incubator Shaker is supplied with shaking tray and water bath cover to work on 220 volt 50 Hz. of A.C. supply. Optional Microprocessor Thermostat â��EGOâ�� /â��JUMOâ�� German with the accuracy of ±0.5oC. Digital temp. Indicator Digital temp. Indicator-cum-Controller. Microprocessor PID digital temp. Indicator-cum-Controller. Shaking tray for 25ml, 50ml, 100ml, 250ml 500ml and 25mm dia.test tubes or Conical flasks.

Our strong association with the renowned vendors in the market helps us in fetching the outstanding array of raw materials and that too after complete inspection. We keep our standards high to maintain quality throughout. Rely on us for timely delivery as we are assisted with up-to-date transit facilities and logistics services.   Note : BHI-LSR–130 WATER BATH INCUBATOR SHAKER

Temperature range from room temperature to 100ºC. Temp. is Controlled by Thermostat Digital Temp. Controller PID with an accuracy of ± 0.5ºC. Double walled inside made of stainless steel 304 Quality and outside Mild Steel sheet painted in epoxy powder coatingS.S. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 rpm. To work on 220230 volts A.C. Supply. SHAKING TRAY SIZE: INSIDE TRAY MADE OF S.S. 304 QUALITY) Models : Cooling Models With Temp. Range 5 - 50ºC are also available

• Shaking Speed: 40 to 140 rpm
• Temperature Range: 100C,
• Construction: Inside made of SSG 304 Outer body Galvanised Sheet
• Finish: Powder Coating Finish