Water Cooled Cable Dealers

We have facility to manufacture Water Cooled Cable suitable for any induction melting /heating equipment as per our standard or customized design. We are using electrolatic grade copper rope to get maximum conductivity, which ultimately reduce lot in terms of power consumption. Hose pipe being used is non conductive rubber and covered by fire retardant thermal insulated cloth. All end terminal are made to meet your requirement.We can also provide different type of brass and copper end terminals, carbon free rubber hose.

These cables are used as supplementary cable to connect kickless cable and gun are of the single conductor only. To meet the connector needs in the resistance welding operation. Electromech offer a broad variety of secondary cable. Each cable is design and built to perform with maximum efficiency and economy in its in depended application. Electromech water-cooled jumper (Aid)cable to electrically connect distant points which move in relation to each other such as, The movable gun-arm of the certain types of welding guns to the electromech cable. On a multiple spot welding machines. Electromech water cooled jumper & sub cables are flexible rope types secondary connectors, assembling with high conductivity terminals. There are sheathed with reinforced abrasion & oil resistant hose. Free water passage is insured by means of an open spring core progressing the entire length of the cable. Thus permitting the cable to operate under the condition of acute bending without obstructing the water flow. TERMINALS Straight lugs are machined from high conductivity   electrolytic  Copper bar stock. Bends lugs are forged and machine from high conductivity electrolytic copper.   WIRE CONSTRUCTION This is a made from 0.05mm2  electrolytic grade Copper wire. Each bunch or herringbone construction to reduce the rate of wire facture by providing lateral surfaces wears areas. The total sectional area shall not be less than the sectional area as per MCM/mm2 rating.   Wire connection to terminal Water is terminated in a crimped in   soft electrolytic tube and the soldered to the terminals. Wire cannot melt out during brief overloads   FLEXIBLE HOSE COVER The outer rubber hose made of heat resistant on its inner Surfaces & abrasion resident on its outer surfaces.   WATER FLOW Coiling water is passed at the rate of 3 lit/ min at the pressure of the 6kgf/ cm2 and the pressure drop does not exceed 0.7kg/ cm2   WATER PRESSURE The cable is tested at a pressure of 6 kgf/ cm2 (kcs) to ensure then there is no leakage or hose damage.   Optional feature ROTECTION SLEEVES: - In order to eliminate breakage of strands due to frequent acute bending operation, projection sleeves are provided on the area of both the terminal joints. 

We are engaged in offering Induction Furnace Water Cooled Cables in all sizes. We make available Induction Furnace Water Cooled Cables suitable for any induction melting /heating equipment, as per requirement. Electrolytic grade copper rope is used in Induction Furnace Water Cooled Cables to get maximum conductivity, which reduces lot in terms of power consumption. Hose pipe is non-conductive rubber and fire retardant thermal insulated cloth covers it. All the end terminals of Induction Furnace Water Cooled Cables can also be customized.

• Type: Water Cooled
• Material: Brass, Rubber
• Shape: Round
• Thickness: 1.5-2mm
• Certification: CE Certified
• Voltage: 220V
• Power: 1-3kw
• Brand Name: Padmini

• Packaging Type: Roll
• Country of Origin: Made in India
• Material: Copper
• Diameter: 10 m.m. to 100 m.m.
• Brand: Electro power enterprise

• Material: Copper
• Packaging Type: Bundle
• Diameter: 8 mm upto 2 Inches
• Brand Name: Sheena
• Length: Preferred or upto 100 Mtrs.
• Wire Material: Annealed Bright Copper
• Gauge: 0.450 mm
• Size: 16 sqmm to 1800 sqmm

These cables are used as supplementary cable to connect kickless cable and gun are of the single conductor only. To meet the connector needs in the resistance welding operation. Electromech offer a broad variety of secondary cable. Each cable is design and built to perform with maximum efficiency and economy in its in depended application. Electromech water-cooled jumper (Aid)cable to electrically connect distant points which move in relation to each other such as, The movable gun-arm of the certain types of welding guns to the electromech cable.   On a multiple spot welding machines.Electromech water cooled jumper & sub cables are flexible rope types secondary connectors, assembling with high conductivity terminals. There are sheathed with reinforced abrasion & oil resistant hose. Free water passage is insured by means of an open spring core progressing the entire length of the cable. Thus permitting the cable to operate under the condition of acute bending without obstructing the water flow.   TERMINALSStraight lugs are machined from high conductivity electrolytic Copper bar stock.Bends lugs are forged and machine from high conductivity electrolytic copper.WIRE CONSTRUCTIONThis is a made from 0.05mm2 electrolytic grade Copper wire. Each bunch or herringbone construction to reduce the rate of wire facture by providing lateral surfaces wears areas. The total sectional area shall not be less than the sectional area as per MCM/mm2 rating. WIRE CONNECTION TO TERMINALWater is terminated in a crimped in soft electrolytic tube and the soldered to the terminals. Wire cannot melt out during brief overloadsFLEXIBLE HOSE COVERThe outer rubber hose made of heat resistant on its inner Surfaces & abrasion resident on its outer surfaces.WATER FLOWCoiling water is passed at the rate of 3 lit/ min at the pressure of the 6kgf/ cm2 and the pressure drop does not exceed 0.7kg/ cm2WATER PRESSUREThe cable is tested at a pressure of 6 kgf/ cm2 (kcs) to ensure then there is no leakage or hose damage. OPTIONAL FEATUREROTECTION SLEEVES : - In order to eliminate breakage of strands due to frequent acute bending operation, projection sleeves are provided on the area of both the terminal joints.  

We are supported by hi-tech machines and expert personnel that enable us in meeting the bulk packaging of the products. Moreover, we check the entire lot before making the final dispatch. We have a team of professionals who work in assistance with the clients and guide them with the secure payment procedure. With us, clients can do online and offline transactions as per the convenience. Kickless Cable (Water Cooled) Additional Information : Minimum Order Quantity - 5 Pieces Pay Mode Terms - T/T (Bank Transfer),Other Port of Dispatch - Gurgaon Delivery Time - 3-Days

• Country of Origin: India
• Type: Water Cooled Cable
• Shape: Round

The company is a well-known Manufacturer, Exporter and Supplier of Water Cooled Cables in Durgapur. The Water Cooled Cables are manufactured by experienced professionals and engineers suitable for any type of induction furnace like electrotherm, megatherm or inductotherm etc. The company is manufacturing a wide range of Water Cooled Cables ranging from 5 kg to 30 ton induction furnaces.

We have established ourselves as one of the most loved suppliers of Water Cooled Cables.  These cables can be availed from us at fairly reasonable rates in bulk or medium sized quantities. We have a large client base for this product that is continuously increasing owing to the excellent quality of goods and service that we provide. Kindly contact us if you would like to make a purchase.

Our company is recognized as one of the leading Manufacturers and Suppliers of Water Cooled Cables in India. We are producing the supreme quality Industrial Water Cooled Cables, which are used for different kinds of applications in different industries. We are offering huge collection of Water Cooled Cables that are available in various types and sizes. One can get our premium Water Cooled Resistance Welder Cables at reasonable prices.Range : Cables : Capacity (100 KG - 40MT) Thimble/Lugs : Capacity (100 KG - 40MT) Stainless Steel Clamps Carbon Free Hoses : W/P (10 KGF/CM^2) Copper Conductor rope : (Capacity (100 KG - 40MT) Strip type Hose  Clamp (1.5MT - 40MT) Wire type Hose Clamp (100Kg - 3MT)

We made all type of water cooled cable of induction lrf and arc furnace with et grade copper and Hydrulic tested with high quality hose pipes

Manufactured from good quality copper wire, the water cooled cables that we offer are known for its ability to cool the cable by convection. This water cooled cable is highly acclaimed in the market due to its exceptional reliability. Owing to the durable performance of our water cooled cable, we have carved a benchmark for the competitors in the domain. praised forperfect insulationhigh tensile strengthaccurate fabricationexcellent corrosion resistancedurabilityused totransmit high frequency current from power source to work head transformer in induction hardening applications

• Brand Name: WCF
• Material: COPPER
• Conductor Material: COPPER
• Insulation Material: CARBON FREE HOSE
• Upper Material: Rubber
• Inner Material: Copper
• Shape: Round
• Color: Green
• Condition: Good
• Application: Industrial
• Certification: MSME
• Dimension: 150mm
• Packaging Type: Box
• Pipe Length: Party Requirement
• Type: Water Cooled Cable
• Diameter: Up To 150mm
• Thickness: 50mm
• Core: 7, 13, 19
• Warranty: 2 Years
• After-Sales Service Provided: Yes
• Country of Origin: India
• Jacket: Asbestos, Ceramic And Glass Covered

FEATURES & PROPERTIES : Meets the requirement of CENELEC HD 22.1.S2, DIN   VDE 0282 PART     810, IEC 245,     CEI 20-19 & BS 6007,   BS 6899. Designed for heavy duty use.  Non toxic cable.  Cur, tear & abrasion resistant.  Exceptional long term performance.  Excellent resistant to oils, chemicals,     ozone, solvents.  Excellent Impact Resistant.  Excellent Weather Resistant.  Performs & Looks like Vulcanize Rubber.  Excellent Electrical Properties.   APPLICATION : Cables for drinking water. CONSTRUCTION : Conductor : Finely stranded bare copper flexible conductor.Insulation : Water resistant EPDM base rubber,Sheath : Black heavy duty EPDM base rubber.Core Colours : 4core: Black, Light Blue, Brown, Yellow                            with green line Or Green with yellow line                           OR                            4core: Red , Yellow Blue, Green Or Black

• Country of Origin: Made In India
• Material: Copper
• Packaging Type: Roll
• Brand: Lawatherrm
• Length: 2 M

We are reliable name in importing and supplying electronic spares which are extensively used for diverse industrial applications. All the product offered under this category deliver peak performance with respect to performance, accuracy, efficiency and other quality features. Under this category, we offer the following products 

Leveraging on our rich industry experience and strong tie-ups, we are capable in bringing forth top-notch quality Water Cooled Cables & Busbars. Offered by us in a gamut of specifications, our Water Cooled Cables & Busbars are the preferred choice amongst the buyers. The Water Cooled Busbars are comprehensively used in induction heating applications. We have the ability to take up even the bulk order of them and deliver them well in time.   Advantages : High Flexibility Low Impedance, Low Energy Loss Excellent Durability Easy Maintenance

• Brand Name: PAVI
• Insulation Material: Rubber Hose
• Inner Material: Copper
• Certification: ISO 9001:2008
• Feature: Quality Assured
• Packaging Type: Gunny packing or woodden box
• Type: Water Cooled Cable
• Warranty: 12 monthe from date of supply
• Country of Origin: India

Water Cooled Cables are made from pure EC grade copper wires with Forged Lugs. They are enclosed in Asbestos vulcansied Carbon free Rubber Hose and have clamps on top . Used in Arc Furnaces, Steel melting shops etc

• Material: Copper
• Diameter: 20 mm
• Core: 2 Core
• Pipe Length: 40 Meter
• Packaging Type: Roll

FOR ARC MELTING FURNACES ASBESTOS COVERED CABLE COOLANT NYLON TAPE FINISH NEOPRENE HOSE FASTENED AT BOTH ENDS BY S. S. WIRE TYPE HOSE CLIPS WITH SILVER PLATED COPPER END LUGS CRIMPED AND SOLDERED WTH MULTI LAYER STRANDED ANNEALED BARE BRIGHT ELECTROLYTIC COPPER CONDUCTORS OF REQUIRED CROSS SECTIONAL AREA AND REQUIRED LENGTHS CONDUCTORS CENTRALLY SEPERATED TO PREVENT RESTRICTION OF WATER FLOW AS WELL AS SCOURING WITH RUBBER HOSE BY COPPER / BRONZE SEPERATORS PLACED AT SUTABLE INTERVALS NIPPLE SIZE & POSITIONS AS PER CUSTOMER'S DESIGN. REPAIRING / REPLACEMENT OF OLD CABLES ALSO UNDERTAKEN.

• Brand Name: star
• Condition: New
• Conductor Material: Copper
• Covers: Wear,Splash or Thermal Sleeves
• Cable Conductor: 99.99% pure
• Plating: Bare or Silver Terminals
• Is It Fire Resistant: Fire Resistant
• Power/Voltage: 220 V / 380 V / 415 V
• Length: customized

Kay Vybin water cooled jumpers or sub cables are flexible rope type secondary connectors, assembled with high conductivity terminals. They are sheathed with reinforced abrasion and oil resistant hose. Free water passage is insured by means of an open spring core progressing the entire length of the cable, thus permitting the cable to operate under conditions of acute bending without obstructing the water flow.

We are offering a wide range of premium quality Copper Water Cooled Flexible Cable to our clients. This product is developed and designed using premium grade components. These are highly appreciated for its long service life features across the industry. Our valued customers can available this new and unique innovation at a very reasonable rates from us. Features   High strength Rust resistance Sturdiness Durability

• Type: Water Cooled Cable
• Material: Brass, Rubber, Silicone Rubber, Steel
• Thickness: 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm, 6.5-7mm, 7.5-8mm, 8.5-9mm, 9.5-10mm
• Application: Home, Residential
• Color: Black, Blue, Grey, White
• Voltage: 110V, 220V, 380V
• Upper Material: Brass, Stainless Steel, Steel
• Feature: Crack Free, Durable, High Ductility, High Tensile Strength
• Inner Material: Brass, Copper, Steel

We are the main supplier of this product.

Water cooled cable is a flexible power connection between furnace panel to crucibles.wide assortment of water cooled cable which stands high on quality parameters and is available at competitive prices. Also, these are duly checked at certain parameters to ensure their durability and reliability. The range comprises of following components such as:• For Any furnace as per Specification• End Connections (thimble) & Brass Male adaptor for Water cooling lead• Wooden Hanger for Water Cooled Lead support• Copper wire rope