Water Resistant Adhesives Dealers

• Brand Name: Wudman
• Type: Waterproof Adhesive
• Country of Origin: Indore  
• Application: In furniture industries for laminate pressing and other wood bonding
• Packaging: Bulk

This product use in furniture industries for laminate pressing and other wood bonding this is a water proof adhesive.

• Type: Adhesive
• Color: Clear and White
• Form: Liquid & Paste
• Pack Size: 5 Ltr
• Coverage: Approximately 4 to 5 sq.ft. with 3 mm thickness per kg of DU Flex

• Color: White
• Brand Name: Pidilite
• Application Medium: Brush
• Grade Standard: Industrial
• Strength: High
• Model Name/Number: Fevicol Marine

• Solid Content: 45% (±2%)
• Viscosity (RVT/SP — 6120/30.C): 150-250 Poise
• PH value: 3-5
• Free Monomer: 0.3%
• Max Coverage (under standard conditions): 50 - 55 Sq.
• Pack Size: 200, 500 gm, 1, 5, 10, 30 & 50 kg

Product Description : Heat Resistance, Water Proof bond, High Coverage, fast Drying. Weather change and continuous exposure to water and moisture expose furniture to stress. This could result in opening of joints and de-bonding of laminates in-spite of using good quality material. 'Ombond Waterproof Adhesives' is a specialized waterproof adhesive that protects furniture from de-bonding even when exposed to water.Areas of Application : Bonds lumout, plywooa and other hard /soft wood. veneer. particle board. MDF, block board, hard board. etc. Spetially made for the handicraft industry and bonds all types of wood and ply to laminate. mainly in areas where furniture is affected by moisture/woter like kitchen, bathrooms, etc. Application Methods : Surfaces to be bonded should be free from oil, grease. anddust and dinty Should be dry and properly leveled. For best results. roughen the surfaces to be bonded. Stir content of container before use. Apply even coats of OMBOND EB first on comparatively on porous surface for e.g. apply first on porous surface like plywood, MDF. particle board. Do not allow adhesive to dry. and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform Contact and no At interruption between both the surfaces. Pressure can be given using nails ciarnbs, weight. masking tape etc. Product Features : 2 hrs. boiling waterproof. 72 hrs. normal waterproof High Strength cross linking Adhesive Excellent Spread ability and High Coverage Excellent heat resistance ' Product Benefits : Save Cost Spread Easily Better Coverage Best Solutions for fixing Laminate. Plywood. Veneer. Matt any wood to wood bonding. Particle Board, Block Board to Laminate Excellent for heat prone applications like kitchen or high temperature climatic zones

We are flexible in offering Fevicol Marine Waterproof Adhesive that is manufactured using premium raw material. We are amongst the few names offering quality assured and cost effective Fevicol Marine. We are associated with leading manufacturers and vendors in the industry. They provide us with the Fevicol Marine Waterproof Adhesive only after complete testing. We deliver the Fevicol Marine using high grade packaging material to avoid spilling.

We are recognized Manufacturer and Supplier of Antique Flexi Bond Waterproofing Adhesive from Surat, Gujarat. Waterproofing Adhesive, that we offer, is made to provide protection for concrete from seawater. Due to its long lasting effects and quality features, our Waterproofing Adhesives are highly appreciated. Buy from us Waterproofing Adhesive in different quantity and packaging at unbeatable market rates. We assure safe and timely deliveries.   Features & Benefits : Waterproofing - Exceptionally good waterproofing. Ease of application - Cold applied, bituminous emulsion material. Easily applied by brush or mop. Durability - Forms relatively thick (1.2-1.5 mm) film providing excellent impermeable and durable membrane. Movement accommodation - Polymer modified hence forms flexible film. Also accommodates thermal stresses in slab due to variation in temperature. Reinforcement – Higher reinforcement can be induced with polyester fibre sheet between the coats. Self priming – No separate or additional primer is required. Method of Application : Surface Preparation : Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. Mechanical means such as wire brushing & shot blasting can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks up to 5 mm width should be filled up with Antique Non Shink Crack-x. Cracks more than 5 mm and all separation gaps should be filled up with Antique Flexi Bond URP Modified Adhesive as specified. Application : Apply Three coats directly by brush or mop and dilute Antique Seal - 115 with three part of water & one part of Antique Seal - 115 powder. Apply 2nd & 3rd coat in gapes of two or three hours. Cleaning : Tools & equipments should be cleaned with potable water immediately after use. Cured material can be cleaned by scrapping  Precautions & Limitations : Dilute with water for application. Not recommended for areas larger than 2000 sq. ft. Always protect the coating with proper and appropriate screeding. Do not keep it exposed to UV Coverage : 1kg meterial gives coverage 10 to 15 sq. ft.(Three coats) Coverage may vary depending upon the texture and porosity of the surface Packaging - 1, 5kgShelf Life & Storage : Shelf life is 12 months from the date of manufacturing. Store in a cool & dry place. Keep away from direct sun light Health & Safety Precautions : During application wear protective clothing, gloves and eye goggles during application. Avoid product to contact eyes and skin. Skin Contact : Wash immediately with plenty of clean water. Eye contact : In the event of eye contact splash plenty of clean water immediately and seek medical advice.

Waterproof adhesive

• Form: Gel
• Brand Name: Classic Col
• Material: Pva and Vam
• Feature: Moisture Resistant, Water Resistant
• Packaging Size: 25 Kg
• Packing Type: Bucket
• Appearance: Milky White

We offer excellent quality Heat & Waterproofing Adhesive for the clients. Heat & Waterproofing Adhesive has plasticizer, polymer, and inert filler material as its constituents. Heat & Waterproofing Adhesive, offered by us, is used for cladding & flooring purpose. Our Heat & Waterproofing Adhesive saves power and offers complete insulation.Features Increase structural strength Total insulation Saves maintenance and power High crack bridging ability Areas of Applications Cladding of exterior stone, granite, tiles in elevation. Bathroom tiles fitting Interior tiles or stones over "zero level" (0 level) plastered surface Stone fitting on floors, staircase, skirting How to Use It is a ready to use adhesive. Before application ensure that the level of plastered surface should be "O" level (to reduce material consumption) Clean the surface thoroughly & ensure dust free surface. Apply Master Adhesive on Stone I Tile with iron grooved blade, spread thoroughly over the surface. Press the Stone I Tile against the application surface and apply some pressure. Remove the excess material. Then follow the same steps for rest of the Stone I Tile. For better results apply primer coat of Smart Master Coat on plaster surface and also on base of the stone I Tile.

 Ice Water Resistance Labeling Adhesives for Breweries. Products: Labeling & Foiling of Beer Bottles on High Speed Labeling M/c’s like Krones, KHS etc. Ice Water Resistance upto 3 to 7 days after 24 hours of curing on metalized labels.