Waterproof Elastomeric Coatings Dealers

• Brand Name: Rockhard Polycoat
• Country of Origin: India
• Purity: 90%, 99%
• Grade Standard: Chemical Grade
• Packaging Size: 0-10Kg, 10-20Kg, 20-30Kg
• Usage/Application: Residential And Commercial Use

• Form: Liquid
• Speciality: Waterproof
• Application: Construction
• Feature: Eco Friendly
• Chemical Name: ZC-SEALCOAT
• Quality: Superior
• Form of Chemicals: Liquid

Elastomeric Coating provides a long-lastingWaterproof Coating Exterior masonry walls—particularly ones that are weathered—have long represented one of the most difficult maintenance challenges for the contractor, the painter, and the waterproofer alike.   Most typical exterior surfaces can be successfully protected and maintained by the regular applications of high quality conventional acrylic latex paints. But even the best paints often tend to split and fail when they have been applied over the surface cracks that develop as masonry ages   A Better Alternative: Elastomeric Wall Coatings  The construction chemical industry has known about the limitations of traditional paints on masonry. For almost that long, the industry has been searching for better alternatives. Early attempts to solve the cracking problem, involved formulating coatings with polymers not generally used in conventional paints. Many of these experimental systems provided acceptable service as dirt-resistant coatings.   Unfortunately, virtually all of the polymers tested formed hard films that were too rigid to accommodate the temperature-related fluctuation in the dimensions of the cracks. Inevitably, coatings based on these hard polymers fractured, exposing the masonry to the elements once again.   Recognizing that hard binders were not the answer, the industry turned to "softer'' polymers with much lower glass transition temperatures. Many of the products investigated were already seeing use as binders for caulks and sealants. Because they had low glass transition temperatures, they furnished excellent elasticity and flexibility over a wide range of temperatures.   ADVANTAGES: Instead of depending on a separate, external component to impart flexibility to the film, 100% acrylic elastomeric polymers derive elasticity from a unique combination of special composition, molecular weight, and crosslinking. As a result, they retain flexibility over periods of time. Moreover, formulations based on the 100% acrylic elastomeric polymers exhibit their elastomeric properties over a broad range of temperatures. Thus, the performance of waterborne coatings based on the acrylic elastomerics remains consistently outstanding under all conditions.   In comparing the different types of binders in other areas of performance, the 100% acrylic binders have a significant edge over styrenated products in the area of ultraviolet stabiiity, over viny! acetate products in the area of hydrolysis resistance, and over both chemistries in the area of dirt pick-up resistance. As a result, on extended exposure, waterborne acrylic coatings are more resistant to chalking and do not yellow as do styrenated products. They are not as vulnerable to damage from ambient moisture as acetate-based systems, and they remain cleaner than both types of non-acrylic systems.   Protection with Decoration & Waterproof Elastomeric Exterior Coating ZC-SEALCOAT is a unique polymer based waterproofing, elastomeric exterior performance coating to protect the concrete structure from degradation in varied climatic conditions. ZC- SEALCOAT is a single component 'Ready to Use' formulation with quick drying properties at room temperature. Its outstanding properties of water repellency coupled with toughness helps to arrest the leakage  during rainy season while its stability against UV radiation keeps the brightness unfazed for years together. Its Two in One performance protects the surface from water seepage & leakage, enhances life of plaster and provides desired aesthetical outlook.   PERFORMANCE FEATURES:- Excellent Water Repellency Resistance to U.V. Radiation Resistance to Fungus and moss. No peel-off tendency Tough and Scratch-proof. Excellent Brightness and finish. Stable at high temperatures. Single component, ready to use system Quick drying at room temperature. No water curing required. Can be pigmented in wide colour range   OTHER SALIENT FEATURES WATER REPELLENT WATER VAPOUR PERMEABLE FUNGUS RESISTANT UV RESISTANT CO diffusion resistant Environment friendly Excellent crack bridging Aesthetic Decoration Cost Effective Covering Capacity   DIRECTIONS FOR USE Surface Preparation : Remove dust, dirt, grease, loose particles, flaking paint, wax, fungus, algae from surface using wire brush. Surface should be washed with water and allowed to dry. Priming : Apply the priming coat using recommended primer or by mixing ZC-SEALCOAT with water in the ratio of 1:2 using brush. Finishing : Finish the surface by applying 2 coats of ZC-SEALCOAT with an intercoat interval of 4 hours. Thinning : ZC-SEALCOAT is ready to apply paint, which does not require thinning. Storage : Keep container closed with a tight lid when not in use. Store in dry place.

• Type: Acrylic Polymer Waterproofing Coating
• Color: white
• Purity: 99%
• Form: Liquid
• Packaging Type: Pail
• Packaging Size: 20 Kg
• Application: Seed Coating

RAINSEAL: Polymer emulsion, 100% Acrylic coating, is an elastomeric, single pack roofing compound, which is designed as membrane coating to improve the elongation properties to bridge the existing and future cracks over a wide temperature range. It is a self-cured component application which forms an impervious, tough, hard and abrasion resistant coating. It has exceptional strength and inflammability that prevent peeling, fungus and algae growth. It acts as both waterproof and weather durable coating. Based on special Acrylic Polymers, it is ideal for dry substrate where it forms a seamless, joint free, water and weather tight elastic membrane. Rainseal is suitable for applications to most types of roofs – flat or pitched e.g Concrete, GI Sheets, Metal, Asbestos, wood etc. As it forms a white Colour membrane, there is a direct temperature reduction of upto 4C. It gives a coverage of upto 220-250 Sft per 20 L Pail.

• Form: Milky White Liquid
• Viscosity: 1500CP+/- 100
• Specific Gravity: 1.34@ 25.C
• PH: 9:1:I
• Service Temp.: 10.Ct050.C
• Application Temperature: + 5 .C to 40 .C
• Over all Coverage: 18 Sq Ftl Kg

Perma Eazee Coat SP is a milky-white liquid, which can be brush-applied to most of the structural surfaces to make them waterproof. The coating is UV stable, highly flexible and is a superior quality product. Premium chemicals are used to make Perma Eazee Coat SP. Our Perma Eazee Coat SP is made by the experts. Thus, Perma Eazee Coat SP has accurate composition and waterproof surface quite efficiently. Primary Use : Perma Eazee Coat SP is used for waterproofing all types of RCC surface such as roofs chajjas, parapet walls and external walls. Asbestos cement sheet roof can also be waterproofed using scrim cloth or nylon mesh at the junction, overlaps and J � bolts as reinforcement. As a damp proof course, Perma Eazee Coat SP is applied under the first layer of bricks or blocks in masonry works. Because of the high quality of the product it can be used as final coat on many vertical surfaces after using a roller brush for the desired texture. Advantages : Perma Eazee Coat SP is applied directly from the can. Perma Eazee Coat SP cures to give a permanently flexible and resilient smooth surface' resistant to a wide range of temperature. No cleaning solvents are required and it can be washed off with water when it is still wet. Can be used on wet surface and during rainy seasons. Mechanical damages to the membrane can easily be repaired by spot application. The membrane allows the concrete surface to breath. Seamless application no joint are required. Can be applied with ease to a desired texture using a roller. Direction For Use : Waterproofing normal concrete : Clean the surface to remove all loose particles and any deleterious matter. It repairs all cracks, honeycombs and blemishes from the concrete surface. Brush-apply Perma Eazee Coat SP primer on the entire surface liberally. Perma Eazee Coat SP is prepared by diluting one part by volume of 'Eazee Coat - SP with one volume of water. When the primer coat is just 'dry apply one coat Perma Eazee Coat SP. When this coat is still wet provide fibre glass, scrim fabric or nylon mesh' reinforcements at junctions of vertical and, horizontal surfaces. Then apply second coat of Perma Eazee Coat SP so as to get an even and smooth finish or roller applied textured surface as desired. On asbestos sheet roofing : Provide scrim cloth, fibre-glass fabric or nylon mesh, at J.blots and junction of sheet over one coat of Perma Eazee Coat SP and then brush apply Perma Eazee Coat SP on the entire surface in two coats. Note : Stir the material well in the container before use. Packing : Perma Eazee Coat SP is supplied in 1.5 kg and 15 kg packs Shelf Life : Perma Eazee Coat SP has a shelf life of 18 months if stored in Manufacturer's' original packing in a cool and dry place away from moisture and heat. Statement of Responsibility : Perma branded products when used in accordance with its current published directions for use performs as per its datasheets/catalogue. The Manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.

• Color: White
• Shelf Life: 24 Months
• Packaging Size: 10ltrs, 20ltrs
• Brand: Excel Coatings
• Usage/Application: Roof and Wall
• Packging Type: Bucket
• Type: Acrylic
• Coverage: 20 to 25 sqft double coat per ltr

• Packaging Size: 1, 5, 20 kg
• Color: White
• Form: Liquid
• Packaging Type: Drum, Bottle
• Shelf Life: 18 months
• Brand: Aquatek Conchem
• Usage/Application: Roofs
• Coverage: 2 sqft/1Kg
• Material Type: Acrylic
• Specific Gravity: 1.3
• Hard Dry: 3 Day
• Advantages: Easy and direct (cold applied) application, no preheating required. Seamless, no joint. Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water.

High Performance acrylic polymer modified elastomeric waterproofing is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system.MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durablewater tight coating which cannot be easily damaged orworn away.

“IC PRECISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress. The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces. “IC PRECISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048. Features and Benefits “IC PRECISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality. Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor. Waterproofing coating system for new and existing surfaces. Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapour to escape, diffusing the pressure buildup. Highly effective for Positive & Negative sides of hydrostatic pressure Positive side water Impermeability : 5-7 Bar Negative side water impermeability: 1.5 Bar Effectively seals all existing cracks in the surface. Crack Bridging Capability : 1.5mm. Good resistance against UV and Infrared Rays. Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures. No additional dead load on the structure after application. The surface is ready for any subsequent application within 48 Hrs. Environment friendly coating, no VOC, improving the LEED score of the structure. Areas of Application   Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls. Overhead and underground water tanks. Swimming pools. Toilets & Bathrooms. Basements. Canals & dams etc.

• Brand Name: Sunanda
• Packaging Size: 22.5 kg
• Packaging Type: Plastic Bucket

bfjbfubibr rr9b9efugb9fd0b fb9fbfirt--rtgrirtihirti hrthirtih0r rtiu8 jo0h8w g rgrtttt0u0 9hur9r rthi0bifbif0g98b fgb9 9ur9u9rtgw2 rghr9t rt9gh

elastomeric waterproofing coating, liquid epoxy, liquid rust remover

Waterproof Elastomeric Coatings, acrylic polymer, swimming pool waterproofing

Waterproof Elastomeric Coatings, Anti Carbonation Coating

Elastomeric Cementitious Waterproof Coating, Heat Reflective Coating Services

Waterproof Elastomeric Coating, Construction Chemicals

Elastomeric Decorative Exterior Waterproofing Coating, waterproofing coating