Wave Springs Dealers

The CS2 mechanical seal range is designed for universal application and ideal suited for standardization. The loosely inserted seal faces are easily exchanged, permitting all combinations of materials and stock rationalization.CS2 is used for water pumps , chemical industry, sewage pumps , submerged pumps etc.

Wave springs are special springs usually made from flattened wires or strips. The main advantage of these springs is that the overall length and operating height of wave springs are significantly less than that of standard compression springs, thereby reducing the size of an assembly by as much as 50%. This also reduces the part weight and raw material cost of every spring produced. Wave springs are used in a multitude of applications , from car air bags, pressure valves, bearings, clutch drives, gear boxes, household applications like sprinkler valves, to even sports and running shoes. In dynamic applications, wave springs often reduce vibration, reduce wear, and provides a smoother and quieter performance.

Spring Steel & Stainless Steel in 2 / 3 / 4 waves, gap type, overlap type, double wave type A wave spring is made from coiled flat wire with waves added to give it a spring effect. The on-edge-coiling process creates a circle with one or more turns to specifications in any diameter and any number of specific designed waves. When compared with typical coil springs, wave springs have equal performance with about half of the overall free height. This not only provides for space savings, but also smaller assemblies that use less materials, hence lower production costs. Wave springs are a precision spring and available in many styles and materials. Wave Washers are solid washers that have pressed waves. These items are typically used to offer preload to bearings and bolts Flat Wire Wave Springs v/s Conventional Stampings No material waste compared to stamped parts Rolled flat wire features edges with a radius—NO DAMAGE TO SHAFT/BORE No stamping burrs eliminates the grinding process No stamping through the metal grain--microstructures remain intact Microstructure offers better strength because the line of force in circumferential direction is not disturbed; risk of fatigue cracking and inconsistent loading in a lot is minimized. Applications: Quick Connectors for military, aerospace and industrial applications Centrifugal Pump Bearing Retention Fluid Power Assemblies Mechanical seals Automotive Air assemblies Sprinkler Device Inflation component Flashlight assembly

Product Description SPRINGS FOR WAVE MOTION Transverse Spring, Long: For experiments in wave motion, pulses, reflection and interference. Spring made of SS wire, closely wound to form helix of diameter 2cm and number of turns approx 1200. Waveform Helix (Slinky): For demonstrating wave motion. Helical coil of diameter 8cm approx of flat section wire. The springs are of different diameters 2cm and 8cm approx. But when linked, the reflected and transmitted pulses at their boundary have nearly equal amplitudes. They can also be used separately for simple wave studies.

We Offer Wave Spring Mechanical Seal. applications: generally Used in Petroleum. Chemistry, Refinery, Paper Making, Pharmacy, Power and Auto Industry. operating Limits shaft Dia. :15 to 200mm pressure : Up to 25 Bars temperature : -50 to 220 C.

• Packaging Type: Box
• Usage: Industrial
• Thickness: 2.5-3mm, 4.5-5mm
• Finish: Color Coated
• Wire Diamater: 10 - 20 mm
• Diameter: 0.375

International Industrial Springs is a reliable and trusted gap-type single-turn springs manufacturer and supplier in India. The two ends of the material strip lay on top of each other. This open construction with some overlap allows the ends to move during compression, which if constrained in a bore prevents binding. Applications with AQL requirements should contact International Industrial Springs. Standard parts are available in stainless steel and carbon steel. Common applications for this type of part are adjacent to smaller bearings, where shaft take up or thermal expansion and contraction accommodation is required. The overlap is advantageous for such applications where the bore is made of softer material than the spring and the material thickness of the spring is relatively small. Order now and get our overlap and Gap type Single Turn Springs today.  

After giving tough competition to our contemporaries in Mumbai(India), we have now come forth to challenge the providers in other markets. Our clients can rest assured for the safety of their financial details, along with quickness in payment processing.   Features : Sturdy material Precision made Industrial application

We are the main supplier of this product.

Gap Type Wave Springs are usually installed in limited space, because of its non-deformation tendency and low medium coil force, they are more precise and reliable in performance in bearing Pre-loaded device. Pre tightening force of wave spring on bearing can attenuate noise and improve precision and stability during running of the bearing.  

Wave Spring are made by utilizing littler get together size and less material. The gave spring offered the interesting preferred standpoint for space reserve funds while utilizing for supplanting loop springs. Offered item likewise creates a lessening in the spring pit by diminishing spring working tallness.

We specialize in offering a wide range of compression and extension springs. Our range of products is available in standard and customized specifications. These products are known for quality and efficiency. Using latest production techniques enable us to offer durable products in money-spinning prices. Our ranges of products includes.

Wave springs reduce spring height by 50% Same force and deflection as ordinary coil compression springs Wave springs fit tight radial and axial spaces Over 4,000 standard springs in carbon and stainless steel (.188″ to 16″, 5 mm to 400 mm diameters) No Tooling Charges™ on custom designs (.157″ to 120″, 4 mm to 3000 mm diameters) Exotic alloys available Smalley Wave Springs (Flat Wire Compression Springs) offer the unique advantage of space savings when used to replace coil springs. By reducing spring operating height, wave springs also produce a decrease in the spring cavity. With a smaller assembly size and less material used in the manufacturing process, a cost savings is realized. Wave springs operate as load bearing devices. They take up play and compensate for dimensional variations within assemblies. A virtually unlimited range of forces can be produced whereby loads build either gradually or abruptly to reach a predetermined working height. This establishes a precise spring rate in which load is proportional to deflection. Functional requirements are necessary for both dynamic and static spring applications. Special performance characteristics are individually built into each spring to satisfy a variety of precise operating conditions. Typically, a wave spring will occupy an extremely small area for the amount of work it performs. The use of this product is demanded, but not limited to tight axial and radial space constraints.

We manufacture all types of wave spring washers as per DIN 137 & DIN 6904. The prime quality of raw materials like spring steel, stainless steel and copper are used for the washers manufacturing. The washers are designed to compensate the spring force. The washers maintain a load or take up the shock. The washers are specially designed to deflect the load and acts like a spring. It provides a preload between the two surfaces.

We are offering wave springs with the strong support of our dexterous workforce, we are have been able to bring forth a finest grade wave spring for our valued clients. The provided spring offered the unique advantage for space savings while using for replacing coil springs. Offered product also produces a decrease in the spring cavity by reducing spring operating height. These springs are manufactured by using smaller assembly size and less material. To manufacture this product, we make use of advanced cnc machine using high grade basic material. Moreover, we provide this wave spring in two types include plain end and shim ends at affordable prices. Wave springs (flat wire compression springs) offer the unique advantage of space savings when used to replace coil springs. By reducing spring operating height, wave springs also produce a decrease in the spring cavity. With a smaller assembly size and less material used in the manufacturing process, a cost savings is realized. All springs are manufacture by latest cnc machine with high quality raw material. Wave spring type plain end shim ends

The Series MSI-501 is single Wave springs seal designed for universal applications and ideal suited for standardization.The main advantage of these seal is that it has a wave spring which is laterally stable, lightweight, compact, and easy to install. Torque transmission will be done by retainer shell punch to seal ring. These seals are also used in Dirty applications as spring clogging does not occurs. One can convert MSI-501U to MSI-501W by changing only it’s Seal Ring & Elastomers. This is ideal for stock rationalization

Nested Wave Springs are pre stacked in parallel from one continuous filament of flat wire. The elasticity is proportional to the number of turns. They can exert tremendous forces yet maintain the precision of a circular grain wave spring. In many applications, Nested Wave Springs can replace Belleville Springs, particularly in cases where a high but accurate force is needed.  

We are pioneers in offering a prime range of Wavy Spring to the valued clients which are highly known for their excellent quality and fine finish. The product offer a compensating spring force and maintain a load or take up shock. The product is quality tested on various parameters to ensure the compliance with industry quality standards. Our clients can avail the products at very reasonable rates and within the specified time frame.

• Material Grade: SS302
• Usage: Domestic
• Length: 400 mm
• Wire Material: Stainless Steel
• Diameter: 8 mm
• Packing: Roll

• Thickness: 0-5mm
• Material: Metal
• Shape: Available in Different Shapes
• Color: Metallic
• Finishing: Polished
• Usage: Garage

• Material: Metal
• Color: Metallic
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Application: Industrial

Wave springs can be used in a variety of industrial applications. For example in a pressure release valve a wave spring is used in order to maintain an exact load applied to the top sealing plate. Wave springs are also used in clutch drives. The most common application for wave springs is a bearing preload arrangement. Using the wave spring within the bearing lowers operating temperature, reduces vibration, minimizes wear, and provided for a quieter and smoother performance. Wave springs can also be found in very common household products. Sprinkler valves contain wave springs in order to maintain constant pressure on the pop-up-head, firmly holding it closed. The water pressure will overcome the springs force and the water will be released, after the water pressure decreases the force of the spring will regain statute and the pop-up-head is resealed. One of the last major applications of wave springs are the ones found within the gear box drive. The wave spring greatly reduces the vibration within the gear box. Also, the spring takes up tolerances that accumulate in the plastic components of the box.