Web Guiding System Dealers

• Size: As per the requirement
• Color: As per the requirement
• Country of Origin: Made in India
• Features: Low maintenance , Ruggedly constructed , Optimal performance.
• Motor: 0.5 HP
• I Deal In: New Only
• Usage: Industrial

• Features: Outstanding performance, Durable Sturdy , Corrosion resistant.
• Air sensor air pressure: 5 to 28 mbar, infinitely adj.
• Phase: 3 Phase
• Motor: 0.5 HP
• Weight including oil: 40Kg
• Tank capacity: 17 liters
• Speed of Unit: 250/min
• Pump flow rate: 3.4 l/min
• Oil type: Servo 32, Enklo 44, Hydro 37
• Max Operation force: 260Kg
• Line pressure: 14 bar
• Followup speed: 30mm/sec

• Brand Name: MAXEL
• Brand Name: MAXEL
• Material: WEB GUIDE SYSTEM

• Automatic Grade: Fully Automatic
• Packaging Type: Box
• Features: Low maintenance
• Grade: AA

The packaging process commences under the vigil eye of the management and expert packaging material. They ensure that only experts certified packaging material is used to evade loss during transit. Use of finest raw material helps us in bringing forth exceptional products. Due to this very fact, we make use of only quality raw materials procured from trusted sources.

• Type: Web Guiding System
• Application: Industrial Use
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg, 500-600kg, 600-700kg
• Color: Black, Blue, Brown, Green, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical
• Warranty: 1year, 2years
• Capacity: 0.5 hp ,1 hp
• Phase: Single Phase , Double Phase , Three Phase
• Frequency: 50-60 Hz

It consists of two rectangular steel tubing frames. One is stationary, the other is movable. it is supported in a nyalguide sliding block and arcuate bar system and has an idler roller at either end.maintaining the same direction of travel,It is insensitive to altitude and can even be mounted upside down. Solidly supported on all four corners by nylaguide bearings, it is not subject to deflections caused by cantilever stresses.

ConPaptex manufacturer of Web Guiding System uses one of a series of Web guide pneumatic hydraulic units in most of its systems. These Web Aligner units come in several sizes and a suitable one can be found for any application. Also Web Guiding System manufacturer for machines of Slitter Rewinder Machine, Winding Rewinding, Inspection Rewinding or more with international standard quality. STANDARD FEATURES   Wide range of coating with hardness depending on the type of printing and with a thickness of M. S. Shell. Featuring with Long Life and excellent bonding on face length & side coating also specialized cambering on a high-tech automated CNC machine. Web Guiding Equipment, application of the Roll like Guide Rolls, Nip Rolls, Pressure Rolls, and Squeeze Roll Etc.

• Type: Web Guiding System
• Application: Industrial Use
• Brand Name: ASAIES

Asaies Electronic Web Guide System has been developed to provide high precision web guiding. The system uses high quality image sensor to offer the accuracy of 0.01 mm. Also it has a wide scan range of upto 30 mm. The system offers instant corrections and ensure web is aligned from startup and through out the print run to ensure minimum wastage. We can also upgrade faulty/existing web guide system at an affordable cost.

Doctoring Rewinding Machines Manufacturer to make doctoring process for your flexible Packaging Roll with high quality equipment. Doctoring Rewinding with more than 5 different models to choose from with high quality performance. Like: Standard Doctoring Rewinding Machine, Table Top, High Speed Doctoring Rewinding, Heavy Duty Doctoring Rewinding Machine with Slitting System,Doctoring Film Strip Winding Rewinding, Coil Winding,Film Winding Rewinding for Batch Coding,Film Re Reeling and many more as per client’s requirement and application.

Maxwell control make web guiding system use for sensing printed and edge material of paper, flexible printed film, foil etc.

• Brand Name: FIFE
• Features: Compact design fits easily in tight spaces, Multiple languages and icons for easy setup, training and operation,Color touch screen with options for mounting vertically or horizontally.
• Item Code: FIFE-500
• Stroke Length: 50 Mm
• Usage/Application: Label, Rewinder, Unwinder, Tyre, Steel
• Controller Size: 300 Mm
• Diameter Of Roller: 80 Mm
• Input Supply: 24 VDC
• Maximum Adjustment Speed: 1000 MPM
• Motor: DC Servo
• Stroke: 50 Mm To 200 Mm
• I Deal In: New Only

Accuweb pneumatic-hydraulic power units are constituent components in web guiding systems. Their dual function is to provide the air supply for a pneumatic edge detector and to convert the signal received, which corresponds to the position of the web edge, into a highly accelerated oil flow to the hydraulic cylinder. The movement of the cylinder is proportional to the pneumatic signal strength we have been successfully manufacturing, exporting & supplying all types of hydro pneumo web aligner system, hydraulic power pack unit, electronic guiding system, etc. web handling equipment web guiding system (a) unwinding with edge guide, center guide, line guide (b) rewind guiding (c) intermediate ( pivot ) pivot tra guiding (d) stenter guiding (e) chaser guide (two web syncro guide) (f) unwinding with tension control magnetic particle brake, pneumatic brake or digital ac drive with load cell dancer roll feedback (c) unwinding floating type, turret type, simplex type (d) unwinding with air shaft, shaft less (e) in feed & out feed (isolates web tensioner) with automatic speedtension control digital ac drive with load cell dancer roll feedback (h) inspection winding machine our equipment used in following industries flexible packaging industries: - 1) rotogravure printing up to 10 color, 2) film to film laminationcoating, 3) slitter rewinder, duplex center and surface 4) core cutting mc 5) stretch wrapping mc converting industries: - * b.o.p.p. Adhesive tape coating, * surgical coating, lacquer coating, * masking tape coating, * release paper coating textile industry: - hot air stenter spear - unwind,inspection,rewinding mc - roll to roll baching mc - drying range, jigger machine, - all type cloth guider, tyre fabric processing industries (calender and diping plant) let-of station, safety chuck, ten

• Material: Stainless Steel
• Brand Name: Bel Mark
• Hardness: 30 to 85 shore
• Surface Treatment: Powder Coated
• Capacity: Up to 10 Ton

HIGHER SENSING ACCURACY OF 0.01 MM OM SUNTRONICS has range of sensors which can accommodate Edge Guiding, Line Edge Guiding, Centre Guiding (Fixed and Moving). Sensor selection depends upon types of material and type of environment. Apart from its range of sensors. OM SUNTRONICS is able to develop a tailored made sensor to meet requirement of special customer application. Sensors are designed & manufactured with utmost care to avoid interference of external noise and ambient light. Ensures immunity from Dust and Contaminants

• Features: Rust resistant body, Easy maintenance, Excellent functionality

• Type: Web Guiding System
• Application: Industrial Use
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg, 500-600kg, 600-700kg, 700-800kg, 800-900kg, 900-1000kg
• Color: Black, Blue, Brown, Green, Grey, Light Green
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical
• Warranty: 1year, 2years

Air Turner Bar Systems are designed and manufactured to suit customers' particular application. There are six sizes for 90° entry or 180° turnover, with web widths ranging from 100mm to 3 meters, for horizontal or vertical mounting. The units are built as freestanding or bolt-on modules, complete with leveling braces and bolting down holes. They are designed to suit existing machine and site conditions. The framework is rectangular hollow section with specialized corner bracing incorporating the fine adjustment mechanism and mounting for the Turner Bars. Bars are tubular steel with bell mouth air holes, ground, polished and hard chrome plated. Air blow creates an air film assist to the bar. By choosing appropriate mounting positions, a variety of configurations can be obtained to enable a choice of entry and exit requirements. Path rollers are normally aluminum, statically or dynamically balanced. Air for flotation requires 5 CFM per 100mm web width at 10ins to 18ins W.G. depending on web tensions. Fans direct mounted on each Turner Bar can be supplied at the time of manufacture (option). For narrow web widths and special applications air flotation holes can be reduced for using compressed air or arranged as required.

We are offering guiding system. we are renowned as one of the outstanding double nail guiding system suppliers in india. The guiding system offered by us is ideally designed for use in wire rod & tmt rolling mill plants. The automatic guiding system is made up of stainless steel material and high chromium steel that ensures high durability, tensile strength and resistance to abrasion. The system is installed in front of rolling rolls using the holders. A huge assortment of guide roller boxes is also available along with the twisted pipes and spares.

• Features: Swift edge positioning and unwinding mechanism

We are one of the leading manufacturers and suppliers of Tracking Rolling Assembly With Web Guiding System. The offered unwind web guide consists of a stationary plate, cylinder and moving frame.Our supplied unwind web guide operates by moving the base plate according to the hydraulic signals from the electric unit. The offered unwind web guide is easy to install and fix.

• Power: 210 to250 VAC
• Weight: 4.5 KG
• Features: High precision, Dimensional accuracy, Reliable performance, Longer functionality, Easy installation
• I Deal In: New Only
• Display: 50x19mm sevensegment display
• Operating mode: Automatic and manual
• Power consumption: 5 WATT
• Sensor Type: Throughbeam
• Detection distance: 25 MM
• Detection diameter: 8 MM
• Detection error: 0.1 MM
• Input voltage: 15 VDC
• Output voltage: 5 VDC
• Sensor Weight: 0.6 Kg