Welding Flux Dealers

The Stainless Steel Saw Flux, provided by us, is acclaimed for its sturdy make & durability. Our company is ranked among responsive and responsible Suppliers of Stainless Steel Saw Flux, engaged in catering to buyers across varied markets. We are aware about the insecurities involved while making online transactions, thus, we strictly offer online and offline payment modes that are handled by the professionals only.

Available in liquid form, this Welding Flux is used in welding procedures owing to its exceptional capacity to fuse and weld the metals. We are among the reputed Manufacturers and Suppliers of Welding Flux. This Welding Flux is bottled in quantities, ranging from 100 ml to 1 liter. Available In Brand Name :  soldwel

• Country of Origin: India
• Type: Welding Flux
• Form: Powder
• Features: Compact design,Rust free,Impeccable performance

We supply a wide range of welding fluxes, which can be put to varied uses. These welding Fluxes consist of mild organic acid or strong inorganic acid which promotes high speed cleaning of metals with strong surface oxides and are generally used for silver brazing, phosphoruscopper brazing, solder and aluminum.

Semi Basic Agglomerated flux for welding structural steel. Weld bead hardly increases Si & Mn, it belongs to metallurgy neutral. It has perfect welding performance, stable arc, good surface, excellent slag removal, high impact toughness at low temperature. Can be used for many applications ranging from boilers to pressure vessel, pipeline and low alloy steel structure.

• Type: Welding Flux
• Application: Boiler, Pipes
• Color: Bright
• Feature: Excellent Ductility
• Form: Granule
• Function: Protect Weld Metal
• Country of Origin: India
• Usage: Cladding
• Name: Esab
• MOQ: 1000 kg

• Color: Grey
• Feature: Excellent Ductility
• Application: Production Welding Wire
• Form: Powder
• Function: Protect Weld Metal

SAW Flux. SAW Fluxes are manufactured from mineral constituents in two main form: fused and agglomerated. Agglomerated fluxes are a mixture of selected, finely crushed minerals from natural sources, partly heattreated before manufacturing and metallic ingredients. all constituents are intimately dry mixed and bonded with either potassium silicate or sodium silicate to a wet mixture. This mixture is pelletized and formed to grains in special equipments such as mixer and granulation unit. After baking and screening to the proper grain-size, the flux is ready for testing and packaging. 1. Brief Introduction and points for attention. SAW agglomerated fluxes owns perfect welding technological characteristics, steady are nice welding formation and easy in slag removing. NO smoke or smell produced in course of welding, perfect in rust and blowhole resistance. Except PWL-601, all can be operated with AC or DC. Loose packed SAW agglomerated fluxes can be recycled due to its small specific gravity, so the consumption can be much more less than fused flux (above 20%) Since suitable amount of alloy element can be added to SAW agglomerated fluxes, with the combination of suitable welding wires, it can be widely adopted in the important welding operation of boilers, preseure vessels, chemical industry containers, nuclear power plant, bridges, ships, oil gas pipelines, steel structured houses, oil rigs, etc 2. Guidelines of choosing SAW fluxes and Wires Before application, only a certain understanding of the material of welding pieces, specifications of welding equipments and welding consumables, as well a suitable combination method can guarantee the quality of finished welds. Normal carbon steel and low alloy shall adopt equal strength welding wires and the fluxes to be chosen accordingly in consideration of structure form of work pieces, steel plate thickness (high or low handness), working conditions (dynamic or static load conditions), rapture resistance properties and other requirements. If good plasticity, high impact toughness, satisfied low temperature properties, and strong rapture resistance are required, the high alkalinity fluxes shall be applied, like: PWL 7101, PWL 7101q, PWL 7102, PWL 7105q, etc. If good welding technological characteristic, easy in slag removing, nice welding formation, suitable plasticity and impact toughness are required, acidic agglomerated fluxes shall be adopted, like: PWL 5101, PWL 5101m, PWL 5103 (KF385), etc. If special requrements are necessary for working pieces, like mining equipments, wearing resistance items, etc., the fluxes shall be selected accordingly, like PWL 4102, PWL 4103, PWL 4105. For neutrality ones, PWL 8101special shall be applied which gives excellent resutls for spiral pipes for water pipe lines. For stainless or figured steel welding, PWL 6101 can be selected.

Sandvik’s root flux is used for root protection when joining tubes and pipes where it is impractical to use a shielding gas or access is limited. However, the root flux does not give the same degree of protection. It can, therefore, only be used when the parent metal has enough margin of corrosion resistance for the actual application. The use of root flux reduces the risk of porosity, surface oxides and burn through and is always better than no root protection. Root flux is a powder, which is mixed with water or methanol to form a paste. It is brushed on to the root side, about 20 mm (0.787 in.) on each side of the joint. During welding the paste reacts with the heat of welding, forming a thin protective slag. The slag is washed away by the process medium when the pipe is taken into service. The root flux, which can be used for root passes made by the MMA, TIG or MIG welding methods, is available in plastic bottles containing 0.5 kg (1.1 lbs), sufficient for about 50 m (164 ft) of root weld.

one of the leading in submerged arc welding fluxe supplier company.   calcium-manganese silicate type agglomerated submerged arc welding flux for high speed welding  classification: - aws: sfa/a 5.17  f7a0-el8, f7a2-em12k b.i: 1.10 mesh size: 10x60bss (0.25-1.68mm) density: 1.20 kg/dm3 cheracteristics:- agglomerated, natural basicity, calcium-manganese silicate type high speed welding flux with excellent slag detachability and smooth weld bead.it is welding with single and multi-wire procedure with dc or ac current, due to high alloys the flux is welding up to 20mm in joining applications. typical application: - it is suitable for general construction, welding on structural steel, pressure vessels and water pipes, feasible for welding on a little rusty or oily plates also, it is suited for twin and multi wire welding and well suited in high speed welding especially for spiral pipe mills and also high speed beam welding, drying requirement: - redrying recommended at 350°c for 2 hour before use..

• Feature: Excellent Ductility, Smooth Incision
• Application: Production Welding Wire, Submerged Arc Welding Process
• Form: Powder
• Function: Protect Weld Metal

Our company stands tall among the nonpareil Manufacturers and Exporters of Welding Electrode Flux. The Electrode Flux we make available is manufactured in compliance with international quality standards. In order to meet the bulk and urgent requirements of the buyers, we maintain a large stock of it in our spacious warehouse. Buyers can obtain it at market-leading rates from us.

• Form: Powder
• Brand Name: Esab
• Packaging Size: 25 kg
• Usage/Application: Industrial
• Packaging Type: HDPE Bag

• Packaging Type: Polythene bag
• Quantity Per Pack: 25kg
• Brand Name: Siddeshwar
• Minimum Order Quantity: 1 Metric Ton

• Grain Size: 10 to 60 mesh
• Basicity Index: 1.80

Semi Basic Agglomerated flux for welding structural steel. Weld bead hardly increases Si & Mn, it belongs to metallurgy neutral. It has perfect welding performance, stable arc, good surface, excellent slag removal, high impact toughness at low temperature. Can be used for many applications ranging from boilers to pressure vessel, pipeline and low alloy steel structure.

• Material: Flux
• Packaging Size: 400 gm
• Packaging: Box
• Brand: HMB
• Usage/Application: Silver,Cooper And Brass

In high-temperature metal joining processes (welding, brazing and soldering), the primary purpose of flux is to prevent oxidation of the base and filler materials. for example, tin-lead solder attaches very well to copper, but poorly to the various oxides of copper, which form quickly at soldering temperaturesI

Welding Flux which are agglomerated flux designed for submerged arc welding of mild, medium and high tensile steels in combination with various grades of SAW Wires to yield weld metal with excellent chemical and mechanical properties. The slag removal is easy and weld metal has a smooth and shiny finish. Weld metal is of radiographic quality.