Wet Blasting Machine Dealers

• Voltage: 220-380V
• Automatic Grade: Automatic
• Power: 750-1500kw
• Material: Mild Steel
• Pressure: 0.4-8Mpa
• Frequency: 50-60Hz

• Voltage: 220V
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Weight: 100-1000kg
• Automatic Grade: Automatic

Surface International has developed state of the art Dry and Wet Blasting Machine used to provide micro roughness on external diameter of piston rings of two wheeler and four wheelers. This controlled roughness is required to achieve adequate roughness before chrome plating or moly spray. The credit of achieving non peelable coating rests on the surface preparation. The machine entails a substantially built blast cabinet suitably reinforced & rubber lined to retard wear. A variable AC drive controlled nozzle reciprocation system is placed on the roof of the machine with four number suction blast gun strategically positioned on a jig to ensure uniform coverage of the blasting stream on the mandrel holding piston rings. The piston rings are stacked in two tiers to achieve higher output. This mandrel is mounted on a variable speed turn table & clamped by a pneumatically operated revolving center positioned on the roof of the blast cabinet. A pleated bag dust collector to remove the dust generated during blasting and an abrasive recovery system to recycle the used abrasives after segregating the usable abrasives from non-usable abrasives is standard supply with the machine. The control of the machine is through a cubical panel with all low voltage switchgears, VAC, PLC and touch screen HMI from International Reputed Brands. Sequence of operation of all motors, solenoid valves etc. are depicted on the touch screen panel. The machine is menu driven. Faults if any are visible on the touch screen. To make the machine more user friendly each blast gun is fitted with a flow control valve which gives an alarm if any nozzle is chocked. A temperature controlled heating coil is provided in the storage hopper to avoid coagulation of the abrasive media due to moisture in the air. Any drop in the level of abrasives in the storage hopper below the defined level is indicated by an alarm. All these features has made the machine a fool proof system to achieve the desired roughness on the piston rings

The abrasive particles are suspended in liquid, generally water, and pumped to the nozzle in slurry form. The compressed air stream is supplied in the nozzle to increase the velocity and positive pressure when it comes in contact with abrasive slurry. The pressure pump is made up of wear resistant material. Use of wet blaster is recommended for surface finishing operations and light mark. It is also useful in cleaning, deburing holes and precision cutting tools which are inaccessible by any other method. With use of fine abrasive, a surface can be super finished with wet blasting. Please contact us at trideep@synco.co.in for more information.

• Voltage: 380V, 440 V
• Driven Type: Electric, Compressor
• Weight: weight will vary depending on each models
• Warranty: 1 Year
• Automatic Grade: Manual, Semi-Automatic, Fully automatic
• Application: Foundry, Forge Shops, Automobile
• Material: Steel, Manganese Steel etc.
• Surface: Painted Surface
• Feature: Easy to instal and commission, however it will vary from model to model
• Pack type: Wooden Box, Gunny Bags & Carton Box
• Speciality: Rust removal and surface preparations with quality improvement of Base Metal.

Wet blasting machine is used for removing of fine burrs from gear tooth, cutting tools & other machining parts which is required to clean without damaging the shape & size of the jobs.

wet blasting machine for automobile components surface preparation is key consideration for manufacturing and engineering sector,it may be for aesthetic reasons or to increase product performance or basic material enhancement. This machine is continuous operating type and have multi nozzle for wet blasting purpose.the components are loaded on fixture of satellite tables, wet blast nozzles are strategically focused to treat particular area of components.the water act both buffers and lubricates the particles on impact allowing  very precise finish or stress profiles to be produced importantly without damaging the surface of components. This machine offer consistent high quality results.the machine is having low loading height, negate need for pits or sump to be dug within factory floor. This technology offers a less aggressive process which minimizes the risk of substrate damage, thus produce consistent surface roughness or stress profile. The machine is provided with all safety features and is environmentally friendly with no dust formation during wet blasting.

The abrasive particles are suspended in liquid, generally water, and pumped to the nozzle in slurry form. The compressed air stream is supplied in the nozzle to increase the velocity and positive pressure when it comes in contact with abrasive slurry. The pressure pump is made up of wear resistant material. Use of wet blaster is recommended for surface finishing operations and light mark.   It is also useful in cleaning, deburing holes and precision cutting tools which are inaccessible by any other method. With use of fine abrasive, a surface can be super finished with wet blasting.

• Voltage: 220-380 V
• Automatic Grade: Semi-Automatic
• Material: MS
• Brand Name: Graco
• Frequency: 50 hz
• Power Source: Electric

• Brand Name: Ren
• Warranty: one year
• Automatic Grade: Manual
• Cleaning Process: Cold Water Cleaning
• Cleaning Type: Manual
• Power Source: electric motor or diesel engine
• Pressure (Bar): 250/350/500/1000 bar
• Model Number: RJC
• Speed (RPM): 1450
• Number Of Wheel: 4
• Water Flow (LPM): 15/21/30
• Pressure: 100-1000 Bar
• Portable Machine: Yes
• Motor: 5 hp to 100 HP
• Phase: Three Phase

• Material: Metal / Coil
• Machine Type: High Pressure Cleaner
• Brand Name: ULTRAMAX
• Feature: Critical Cleaning / Residue Free, Non-Ionic, Non-Toxic, Rust / Corrosion Inhibitor, Sudsing / Foaming
• Place of Origin: Tamil Nadu, India
• Industry Used: All Industries where cleaning is needed

This model is specifically designed for Pharma Active Bulk drug cleaning application like Clean room application, reactor and Centrifuges cleaning only for water soluble products from 1 KL to 10 KL Capacity. This model is widely used for process machinery cleaning in Bulk drug industry specifically for reactors with less consumption of water and cleaning of entire inner surface including top of the reactor.

• Fuel: Electric
• After-Sales Service Provided: Online support
• Machine Type: Abrator
• Place of Origin: Rajasthan, India
• Cleaning Process: Abrasive/Sand /Shot
• Supply Ability: 40 Piece/Pieces per Month
• Dimension(L*W*H): Custom Made
• Power(W): Customized
• Use: Descaling / Stripping
• Cleaning Type: High Pressure Cleaner
• Material: Metal / Coil

• Weight: 100-500kg, 1000-2000kg, 2000-3000kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 230V, 380, 440V
• Condition: New, Used
• Capacity: 10-50kg/h, 50-100kg/h
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Warranty: 1 Year
• Driven: Electric
• Motor Type: AC Motor

Portable Wet Blasting machine, Standard Wet Blasting machine

We deal with vapor wet abrasive blasting machine which is widely used for removing corrosion from any surface be it metal or non metallic surface.its a surface preparation machine extensively used on ship's hull surface contact me for any of your valuable queries for corrosion removal and surface preparation requirements regards juzar h.s.

high pressure wet sand blasting machine, High Pressure Water Jet Machine

wet blasting machine, Hanger Type Shot Blasting Machine

wet blasting machine