Wood Thermic Fluid Heater Dealers

High durability The Thermic Fluid circuit permits the transfer of energy at high temperature without the risk of corrosion or pressure. Three Pass Reverse Flame Technology - Ensures complete combustion. Consistent Thermal efficiency of 88% - Ensures low fuel bills. Larger Tube Diameter of Coil - Ensures longer life of the coil. High Unit Dependability - All critical components are of reliable make.

We are offering wood fired thermic fluid heaters.Backed by a team of professionals, we are manufacturing of wood fired steam boiler that is widely used in various industries for steam boiling purposes. These are fabricated as per international quality parameters to provide clients with best grade product. In our range of steam boilers, the thermic fluid has a provision of being heated up to 320 degree celcius. Features: 1. It is circulated in a close cycle to the point of use where it gives up its heat before returning to the primary source for reheating. 2. The transfer of heat takes place at near atmospheric pressure as compared to a pressure as required by saturated steam at 300 degree celcius. 3. Safety provisions which results in drastic cut down on capital expenditure. 4. Thermic fluid used in the system is non corrosive & completely free from any suspended or dissolved solids, resulting in substantial reduction in repairing and maintenance cost.

• Material: Mild Steel
• Application: Industrial
• Power Source: Wood
• Feature: Easy Installation, Stable Performance
• Voltage: 380-400V
• Maximum Temperature: 300 DegreeC

• Approx Price: Rs 1.05 Lakh / Unit

The Wood Fired Thermic Fluid Heater, which we supply, is known for its robust and precise construction and high durability. Substances that are used for the production of different types of goods are named as raw materials. We source these materials only from the trustworthy vendors after complete checking. Over the years, we have become a primary choice of the buyers sine our product is qualitative and deliveries are time bound.

• High Efficiency: Low Fuel Consumption
• Use High Temprature: Suits for Food Industry

We are offering wood fired vertical thermic fluid heater, coal fired vertical thermic fluid heater etc.

Description Thermic Fluid Heaters are forced circulation liquid phase heating system. In the system heat transfer media circulated in a closed circuit through heat heater. The same thermic fluid is reheated and recirculated. The combined expansion cum dearator tank system pressureless and vapourless. The unit basically with 3-Pass Construction. The Thermic Fluid Heating system operates near atmospheric pressure and temperature can be achieved as high as 300°C. Heater assembly consists of a nest of concentric helical tube coils place within a sturdy MS shell. The coils fabricated out of seamless tube high temp. Application allow flue pass to ensure maximum heat dissipation. Application · Textile · Chemicals· Plastic & Rubber· Timber· Metal Finishing· Drying Food Industries· Packaging· Confectionery· Printing etc. Features · The furnace is constructed from Heavy Duty M.S. Sections and covered with M. S. Sheets on one side of the furnace is provided with necessary doors for husk/wood feeding, Emergency by-pass chimney.· Heat exchanger is fitted to the furnace.· The inside of the furnace is constructed with best quality fired bricks & insulation bricks.· The fire bars manufacture from the heat resisting casting are provided.· High combustion efficiency.· Low stack temperature on full load.· No corrosion or scale formation.· Efficiency 76% on GCV.· 60% Benefit fired Diesel/Gas & LDO.· Low Maintenance.

• Size: 6 LKcal/Hr
• Connecting: Food Products, Asphalt Plantt
• Firing Mode: Wood, Coal
• Rating Working Pressure: 6 Bar
• Brand Name: Burner India
• Material: Mild Steel
• Application: Industrial, Heating
• Feature: Durable, Easy Installation, Minimal Maintenance, Stable Performance
• Type: Wood Fired Thermic Fluid Heater
• Fuel: Solid
• Structure: Vertical
• Country of Origin: India
• Temperature: 250-300°C
• Maximum Temperature: 300
• Heat Output: 6LKcal/Hr

• Material: Mild Steel, Stainless Steel
• Application: Domestic, Industrial, Machinery
• Color: Brown, Grey, White
• Automatic Grade: Automatic, Fully Automatic
• Power Source: Coal, Gas
• Feature: Double Chamber, Durable, Easy Installation, Fully Insulated, Minimal Maintenance, Noiseless Operation, Single Chamber, Stable Performance
• Finish: Paint Coated

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.

• capacity: 4 Lakh Kcal

Wood Fired Thermic Fluid Heater 4 Lakh Kcal capacity thermic fluid heater for sale of Energy Machine, Anand make, Year August 2011, wood fired, vertical type 3 pass type along with its accessories

• Net Heat Output: 100000,200000,400000,600000K.Cal/hr. etc.

The high temperature Thermic Fluid Heater is a forced Circulation water tube design in which thermic fluid under pressure circulate though a set of nested coils while draft combustion gases travel across the coils. The hot gases envelop the entire tube surface making maximum use of both Radiant & convective heat to achieve very high heat transfer rates. A circulating pump is selected to give the proper flow rate and pressure for each application to optimize motor horse power required while maintaining low film temp. to ensure long fluid life. Temperature controls monitor the output temperature and regulates the supply of fuel & air to the furnace to provide efficient combustion of the fuel.

We are Leading Manufacturer, Supplier, Dealer & Exporter of Wood Fired Boilers. We are engaged in supplying of high quality Vertical Type Wood Fired Thermic Fluid Boilers, which are renowned for top quality and durability.

SHANTI-THERM is constructed with a Heater assembly which consists of concentric helical coils housed in a sturdy shell. Coils are manufactured out of BS: 3059-68PART-ICEWST -33 which are tested to 1000 PSI. The plates are cut to close tolerance on automatic flame cutting machines, and are welded as per standard codes.

Wood Fired Thermic Fluid Heater is forced circulation liquid phase heating system. In this Wood Fired Thermic Fluid Heater, heat transfer media (Thermk fluid) circulated in a closed circuit through heat heater. The same thermic fluid is reheated and re-circulated. The combined expansion cum dearator tank system is pressure less and vapors less, which is one of the key features of these Wood Fired Thermic Fluid Heaters. The 3-Pass Construction unit also helps in operating near atmospheric pressure and temperature can be achieved as high as 3000C. The assembly of concentric helical tube coils, which are placed within a sturdy MS Shell, is also one of the remarkable features of Wood Fired Thermic Fluid Heater. The coils fabricated out of seamless tube high temperature. Application allow flue pass to ensure maximum heat dissipation. Technical Specfications : DESCRIPTIONUNITJBC TF-02JBC TF-04JBC TF-06HEAT OUTPUTKCal/Hr2,00,0004,00,0006,00,000FUEL CONSUMPTION (ON WOOD)Kg/Hr70150266ELECTRICAL SUPPLYAC-3 PHASE, 4 WIRECIRCULATING PUMP MOTORHp7.512.515Kw5.510.012.5FD FAN MOTORHpNil2.03.0ID FAN MOTORHp3.05.05.0Kw2.253.53.5TF PUMP SIZE (MODEL KSB)mtr3CPK - 32x200CPK - 40x200CPK - 50x200OUTLET TEMPERATURE (Rise)3000CTOTAL CONNECTED LOADKw7.715.016.5THERMAL EFFICIENCY%75% - 2%EXPANSION TANK CAPACITYLTR450600800DRY WEIGHT (APPROX)KG210030004500THERMIC FLUID INLET/OUTLETMM658080FLUE GAS OUTLETMM300x250400x330422x330 Note : We reserve the right to change any specification without prior notice. Click Here For More Information

An extensive range of wood fired thermic fluid heaters can also be availed from us. These heaters are equipped with advanced technology methods and superior quality materials. We have sourced the materials for manufacturing these heaters from some of the reliable and authentic vendors of the industry. Moreover, our range is accredited for their reliable performance, easy operations and less power consumption. features: optimum quality less maintenance abrasion resistant

Fluidtherm is the most reliable and efficient fluid heating system, desirable for high process temperatures operating at low temperatures. Thermic fluid heaters offer higher efficiency, lower operational and maintenance costs. It can improve process consistency and reduce downtime leading to further increase in profitability.

Every solid fuel has different physical and chemical properties which influence the design and performance of the furnace in Thermic Fluid Header, Different combustion system are shown in below diagrams. Low grade fuels are best handled using FBC technology to give good results. Thermotech's unique design for efficient combustion to suit different solid fuels, lie cocal, lignite, wood waste. Husk, Petcoke, bagasse & Biomass fuels results in to low operating cost, trouble free operation and lesser maintenance.

• Temperature: 300-350°C
• Capacity: 4,00,000 Kcals/hr to 80,00,000 Kcals/hr

We offer to our clients a precision engineered range of Thermic Fluid Heater that are corrosion resistant and are easy to handle. We are recognized for supplying excellent thermic fluid heaters with best features and designs & effective price range with different fuel like CoalWoodLigniteHuskSawdustGasLdoOilFoHsd.

Our oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil …

• Capacity: 100 000 to 1000 000 kcal/hr
• Temperatures: 280° C and 340° C

manufacturing facilities have enforced us to bring forth qualitative range of thermic fluid heaters. We use cutting edge technology and quality approved raw materials for the fabrication of thermal oil thermic fluid heaters. Our collection of coil type thermic fluid heaters is fitted with high quality components that make them more qualitative. Passed through a thorough inspection, our thermic fluid heaters are in compliance with the set defined quality parameters. Our 3 pass thermic fluid heaters are especially designed and developed using cutting edge technology under the supervision of experts. Made from quality proven raw materials, our wood fired thermic fluid heater meets the industrial standards due to its unmatched features.

Wood Fired Thermic Fluid Heater, Thermic Fluid Heater, Pulse Jet Bag Filter

Wood Fired Thermic Fluid Heaters, Hot Air Generators, Steam Boilers

Wood Fired Thermic Fluid Heater, Boiler Fire Door, furnace structure

Wood Fired Thermic Fluid Heater, Industrial Chimney, Air Preheaters

Wood Fired Thermic Fluid Heater, Gas Fired Boiler

Wood Thermic Fluid Heater, Pressure Vessels, mounting accessories

Wood Fired Thermic Fluid Heater, Vertical Steam Boiler

Wood Coal Fired Thermic Fluid Heater, boiler nozzle, Boiler Chimney