Wrist Strap Tester Dealers

Wrist straps and ESD footwears are the first line of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/footwear regularly. In order to protect sensitive electronic components, the maximum wrist strap resistance should not be more than 10 meg ohms and footwear resistance should not be more than 35 Mega ohms. On the other hand, the resistance should not be less than 0.75 Mohm as protection to the wearer from dangerous levels of voltage and current flow.  The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or footwear to the foot. It clearly indicates whether or not the wrist strap/footwear system is safe to use.ALSO AVAILABLE WITH FOOTWEAR RANGE UPTO 100M OHMS

• Warranty: 12 Months
• Material: Stainless Steel
• Power: Electronic
• Unit dimensions:: 150 x 200 x 65mm
• Strap Material: Polyester
• Feature: High Quality, Durable, Adjustable

• Frequency: 9 Volt Battery
• Brand Name: Blue Sky
• Features: It can be wall mounted outside the ESD protected area by using the Instruction board. Foot wears can be tested by connecting the Foot Plate
• Application Areas: Diagnostic centers, Municipal hospitals, Primary health centers, Surgical treatment centers
• Voltage: Wrist strap 0.75 to 10 Meg ohms Foot Wear 0.75 to 100 Meg ohms
• Model Name/Number: WSFT - 01
• Dimensions: 135 x 70 x 25 mm
• Weight: App. 150 Gms
• Power supply: 9 Volt
• Accuracy: +/- 10%

We share forefront for manufacturing & supplying of Wrist Strap Tester from Maharashtra, India. The entire product range is made as per industry-defined standards, thus optimum strength and quality are guaranteed. Buyers can consider our name for customized and timely deliveries.More about Wrist Strap Tester Wrist Straps are the first line of defence against electrostatic charges builds up on the human body. They are designed to carry away this change as soon as it is generated. At the same time, the strap must remain electrically safe for the user. Thus, it is important to test every strap regularly. In order to protect sensitive electronic components the maximum strap resistance should not be more than 10 Meg ohms. On the other hand, the path to ground should have at least 750-kilo ohm resistance, as protection to the wearer from dangerous voltages and levels of current flow. The wrist strap tester  checks  these  parameters  under  actual operating  conditions  with  the  strap  on  the wrist. It clearly indicates whether or not the resistance of the strap system including the wearer falls within acceptable limits.   Specifications Pass Band : 0.75 Megohms to 10 Megohms. Indications : Pass  -  Green LED Fail  -  Red LED  Audible Alarm for Fail mode. Actuation : By gently pressing metal sensor plate. Accuracy : +10%. Power supply : 9 V volts battery Dimensions : 125 x 75 x 29 mm Weight : 200 gms Calibration : Recommended  every 12 months.                Traceability : To national standards Warranty : One year

• Warranty: 12 months.
• Pass Band: 0.75 Megohms to 10 Megohms.
• Indications: Pass – Green LED Fail – RED LEDs (High & Low) Audible Alarm for Fail mode.
• Actuation: By Press to ON switch
• Accuracy: + 10%
• Power supply: 9 V DC battery.
• Dimensions: 135 x 70 x 25
• Weight: 100 gms
• Calibration: Recommended every 12 months
• Traceability: To National standards

• Warranty: 12 months
• Weight: 150 gms with battery
• Range: wrist strap 0. 75 to 10 meg ohm
• Dimensions: 135 x 70 x 30 mm

• Features: Use anywhere to check personnel ESD grounding quickly, Checks contact resistance between Wrist Strap and skin
• Resistance Test Range: 750KΩ
• Changeover Point: ±10%
• Dimensions (approx.): 117mm (L) x 80mm (W) x 40mm (H)
• Weight (approx.): 110 grams
• Power Supply: 9V Battery
• Grounding Wire: 2.5 meter

• Actuation: By gently pressing metal sensor plate
• Accuracy: ± 10%
• Power requirement: 9 V DC battery
• Low Battery: Warning less than 7 volts
• Dimensions: 125 x 75 x 29 mm
• Weight: 200 grams
• Calibration: Recommended every 12 months
• Traceability: To national standards
• Warranty: 12 months

• Voltage: 240V
• Material: Mild Steel
• Accuracy: +/-10%
• Operating Temperature: 0-50 Degree Centigrade
• Condition: New
• Application: Clean Room, Automotive Industry

Features: Rugged construction Optimum performance High functionality Long operational life

• Dimensions: 135 x 70 x 25 mm (LxWxH)
• Foot Wear: 0.75 to 100 megaohm
• Range Selection: By Slide Switch
• Indications: Pass – Green LED
• Low & High Fail: Red LED (With Alarm)
• Test Actuation: By Pressing Metal Sensor Plate
• Accuracy: +/-10%
• Power Supply: 9 V Battery
• Battery Status: By Dual Color LED
• Weight: Approx 150 g with Battery
• Calibration: Recommended every 12 months
• Optional: Instruction Board, Foot Plate, Carry Case
• Consist of: Wrist strap tester, Yellow Wall Station, Foot Plate

• Dimensions: 135 x 70 x 25 mm (LxWxH)
• Foot Wear: 0.75 to 100 megaohm
• Range Selection: By Slide Switch
• Indications: Pass – Green LED
• Low & High Fail: Red LED (With Alarm)
• Test Actuation: By Pressing Metal Sensor Plate
• Accuracy: +/-10%
• Power Supply: 9 V Battery
• Battery Status: By Dual Color LED
• Weight: Approx 150 g with Battery
• Calibration: Recommended every 12 months
• Optional: Instruction Board, Foot Plate, Carry Case
• Consist of: Wrist strap tester, Yellow Wall Station, Foot Plate

• Dimensions: 135 x 70 x 25 mm (LxWxH)
• Foot Wear: 0.75 to 100 megaohm
• Range Selection: By Slide Switch
• Indications: Pass – Green LED
• Low & High Fail: Red LED (With Alarm)
• Test Actuation: By Pressing Metal Sensor Plate
• Accuracy: +/-10%
• Power Supply: 9 V Battery
• Battery Status: By Dual Color LED
• Weight: Approx 150 g with Battery
• Calibration: Recommended every 12 months
• Optional: Instruction Board, Foot Plate, Carry Case
• Consist of: Wrist strap tester, Yellow Wall Station, Foot Plate

• Model Number: Z102
• Warranty: 1 Year
• Weight: 200 gms 
• Dimensions: 125 x 75 x 29 mm
• Accuracy: +10 %
• Power Supply: 9 V Battery

• Country of Origin: Made in India
• Usage: Laboratory
• Material: ABS
• Voltage: 24 VAC
• Current: 1.5 A

Combo Wrist Strap Footwear Tester, Finger Cots, Smoke Absorber

Wrist Strap Tester, Solder Wire, esd chairs, Shoes Cover

Wrist Strap Cum Dual Footwear Tester, PCB Assemblers Jig, anti-static gloves