XBEE Modules Dealers

• Price: Rs. 999

We make available XBee Module at market leading price of Rs 999. For years, we are engaged in dealing of XBee Module, as we are its reckoned supplier in the market. Consider our name, if seeking for high quality products that are prepared using the best grade material and modern technology. Our associates procure it from the reliable names after complete quality satisfaction.

• RF Data Rate: RF 250 Kbps, serial up to 1 Mbps
• Brand Name: Digi
• Transceiver Chipset: Silicon Labs Em357 Soc
• Indoor/urban Range: Up to 60 m (200 ft)
• Outdoor/rf Line-of-sight Range: Up to 1200 m (4000 ft)
• Transmit Power: 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm) boost mode
• Receiver Sensitivity (1% Per): -100 dBm / -102 dBm boost mode
• Serial Data Interface: UART, SPI
• Configuration Method: API or AT commands, local or over-the-air (OTA)
• Frequency Band: ISM 2.4 GHz
• Form Factor: Through-hole, surface mount
• Interference Immunity: DSSS (Direct Sequence Spread Spectrum)
• Adc Inputs: (4) 10-bit Adc Inputs
• Digital I/O: 15
• Operating Temperature: -40degrees C to 85degrees C
• Dimensions (L X W X H): 2.199 x 3.4 x 0.305 cm
• Programmable Memory: 32 KB flash / 2 KB RAM
• CPU/CLOCK Speed: HCS08 / up to 50.33 MHz
• Protocol: ZigBee PRO 2007, HA-Ready with support for binding/multicasting
• Encryption: 128-bit AES
• Reliable Packet Delivery: Retries/Acknowledgements
• IDS: PAN ID and addresses, cluster IDs and endpoints (optional)
• Channels: 16 channels
• Supply Voltage: 2.1 to 3.6 V
• Transmit Current: 33 mA @ 3.3 VDC / 45 mA boost mode
• Receive Current: 28 mA @ 3.3 VDC / 31 mA boost mode
• Power-down Current: <1 uA @ 25degrees C (77 F)

XBee-PRO S2B module improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Series 2 modules allow you to create complex mesh networks. this module has the lowest current draw of any Digi RF product. However, the infrastructure of a ZigBee network is more complex and requires more configuration to fully impliment. This module can give range of 90 meters indoor or 3200meters outdoor. This XBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic level translator it can also be interfaced to 5V logic (TTL) devices having serial interface. This module supports data rates of up to 250kbps. They are designed for high-throughput(35kbps) applications requiring low latency and predictable communication timing. Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.

• Weight (GM): 5
• Features: Home Automation,Wireless Sensor Networks,Industrial Control Systems,Embedded Sensing,Medical Data Collection
• Protocol: Zigbee 3.0
• IC Chip: Silicon Labs EFR32MG SoC
• Transmit Power (dBm): 8
• Operating Voltage (VDC): 2.1
• Transmit Current (mA): 40
• Receive Current (mA): 17
• Digital I/O Pins: 15
• RAM: 128KB
• Encryption: 128/256 bit AES
• Channel: 16
• Length (mm): 13
• Width (mm): 19
• Height (mm): 2

XBee Tarang Module

XBEE S2B PRO 2 GHZ RF Module, Arduino Wifi Shield

XBEE S1 Module, RF Wireless Module, Bluetooth Module, wifi module

XBee WiFi Module, Adxl335, ENC28J60 Mini Ethernet Module

XBee RF Module, Smart Card, MIfare Classic 1k Card 13.56MHz, L298 IC