Zinc Cut Wire Shots Dealers

• Size: 0.60mm To 2.50mm
• Material: Zinc
• Color: Grey
• Condition: New
• Country of Origin: India
• Hardness: 45-50 hv
• Composition: Min 99% high grade zinc
• Shape: As Cut CCW (G1), DCCW (G2), SCCW (G3)

\n These are used for deburring aluminum die castings, stripping paint, removing powder coatings without damaging substrates. Zinc cut wire shots usually have very low hardness but we can also make high hardness alloy zinc cut wire shots depending on customer requirement. \n

• Material: Zinc
• Diameter: 0-10mm
• Thickness: 0-5mm
• Application: Industrial Use
• Color: Metallic
• Surface Finishing: Polished
• Chemical Composition: Zn 99.99% or Up, Fe 0.005% or Less
• Hardness: 36-51 Hv
• Available Size: 0.6 X 0.6 Mm, 0.8 X 0.8 Mm, 1.0 X 1.0 Mm, 1.2 X 1.2 Mm, 2.5 X 2.5 Mm, 3.0 X 3.0 Mm

• Brand Name: Suntec Enterprises
• Material: Zinc
• Size: 0.30-3.17 mm
• Packaging Type: Packet
• Hardness: 36-51 HV0.2

Orient Cut Wire Shot are made of cold drawn spring steel wire with a high content of carbon (C) and is obtained by cutting wire into lengths equal to the wire diameter, and then making it round if necessary through the conditioning (rounding) process. The quality is assured in cut-wire shot because the wire from which it has been produced is heat treated and cold drawn to achieve hardness and homogeneity. This, together with the balanced chemical properties and complete solidity of every piece, insure that cut-wire shot will not fracture, break or powder while in use. During this process, Cut Wire Shots are obtained in 2 forms:

Zinc Cut Wire is a relatively soft abrasive with a high denisity giving it good kentic energy. It creates less dust then steel or aluminum abrasives, has a long life cycle and causes relatively low wear on machine parts. Zinc Cut Wire is used in applications where a soft material is required for de-flashing and deburring zinc or aluminium die castings and it is also used to strip paint and powder coatings without damaging the substrate.

• SIZE IN MM: 0.1,0.2

Cut wire shot is produced by cutting wire into lengths equal to the wire diameter. If required the particles are rounded to remove the sharp corners. The sharp edges of the cut shot may also be useful, in case of additional cleaning requirement.Improved Consistency: Exhibits highest consistency in terms of shape and size Highest Durability: Has a wrought internal structure with almost no cracks, porosity, etc. Low Dust Generation: Our Cut wire shots exhibit the lowest dust generation rate Improved Part Fatigue Resistance: Our peened parts and specimens exhibit higher average and consistent life as compared to those peened with equivalent cast steel shot Lowest Surface Contamination: Unlike other media, our shots do not leave any residue or Iron Oxide coating over the particle surface.

Blasting Hose Nozzle, Abrablast Blasting Hose, Abrablast Blasting Hose

aluminum oxide grit

aluminium cut wire shots

Zinc cut wire shot, Aluminum cut wire shot, Copper Cut Wire Shot

Zinc cut wire shot, Zinc flake, Zinc Strip, zinc kettle

Ci Grits, Casted Steel Shots, Aluminum Oxide Grits

Zinc cut wire shot, silicon carbide grit, Brown Aluminum Oxides

Zinc cut wire shot, Aluminum cut wire shot, Brass Cut Wire Shot

Zinc cut wire shot, Plastic Spools, Aluminium Cut Wire Shot, Plastic Media

aluminum cut wire shots, copper cut wire shots

Zinc cut wire shot, sand blasting nozzle, Cut Wire Shot

Zinc cut wire shot, Aluminium Shots, Industrial Gun Metal Bushes

Zinc cut wire shot, Tungsten Carbide Nozzle, Nozzle Holder

Refractories, Cut Wire Shot, Brass Cut Wire Shots, copper cut wire shots

Brass Cut Wire Shots, green silicon carbides, White Fused Alumina

Zinc cut wire shot, Aluminium Cut Wire Shot, Cooper cut wire shot

Chilled Iron Grit, Gauntlet Safety Gloves, Chilled Iron Shots

Zinc cut wire shot, Aluminium Cut Wire Shot, Aluminium Oxide Grit

Zinc cut wire shot, Steel Cut Wire, Cut Wire Shot, Cut Wire Shot