Zinc Silicate Primer Dealers

• Color: Available in various colours
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L
• State: Liquid
• Finish: High Gloss
• Primer Base Type: Oil Based
• Application method: Spray gun

• EPOXY BASE PRIMER: GREY

We are ranked among Manufacturers & Suppliers of premium Epoxy Inorganic Zinc Silicate in Pune, Maharashtra, India. Our Epoxy Inorganic Zinc Silicate is excellent for protecting metal surfaces from corrosion. It is a great primer used in various industries. Our company manufactures Epoxy Inorganic Zinc Silicate using up-to-date technologies with superior-grade raw materials. Buyers can order Epoxy Inorganic Zinc Silicate as per requirement and expect on-time delivery.    Scope : A dual pack Paint possessing excellent durability & Weather properties. The product is designed to withstand a constant.    Use : Recommended for use outside structural steel etc.   Product Data : Type : Two Pack, cured with polyamide Composition : Epoxy resin/metallic zinc with silicon vehicle Application: Brush / Conventional spray. Recommended DFT : 50-60 microns. per coat. Theoretical Spreading Rate : 9.0-12.8 Sq. meter/Liter. Practical Spreading Rate : 6-7 Sq. meter/liter. Drying Time :Recoating : Minimum : 6-8 hrs. Surface Dry : 50 mins. Tack Free : 2 hrs. Handle : 4-5 hrs. Hard Dry : Overnight. Complete cure : 7 days Flash Point : Above 30°C. Colour : Grey Thinner : Pragati Make Epoxy Thinner ( PPCOAT EPX T200) Finish : Smooth & Matt. Temperature Resistance : continuous 200°C. Weatherability : Excellent. Flexibility : Excellent.0 Storage Life : Up to 9 month in intact condition or sealed the containers are kept under cover in a dry place under normal temperature conditions.   Surface Preparation : Make full use of mechanical tools along with manual chipping & Wire brushing to remove loose particle rust sanding to Sa2 ½ sand paper. Excessive burnishing of steel is to be avoided. Application : Stir well when apply. To mix proper by manual or machine tool stirrer & apply brush, apply airless gun for achieved recommended DFT.Resistance Guide :  Salt : Good Water : Good. Chemical : Fair   Note : The mix primer must be used off within 3 hours for obtaining better finish. Do not apply when temperature falls below 10°C & when relative humidity rises above 90% do not apply during rain Fog or mist.

• Zinc Rich Primer: Inorganic Zinc Silicate Primer

We are offering inorganic zinc silicate. 1k zinc rich primer, 1k inorganic zinc silicate primer, 1k polyurethane moisture cure primer.

• Packaging Size: 1 Litre and Also available in 4 Litre, 10 Litre, 20 Litre
• Brand Name: Linsol Resin & Polymers
• State/Form: Liquid
• Categories: Oil Based
• Pack Type: Tin Container

• Color: Gray
• Finish: Gloss
• Packaging Size: 20 LTRS
• Country of Origin: Made in India
• Brand: Berger
• Usage/Application: Industrial
• Type: Bonding Primer
• Primer Base Type: Oil Based

• Packaging Size: 20 LTR
• Brand: AKZO NOBEL
• Coverage Area: 5 SQ MTR/LTR
• Paint Base Type: Oil Based Paint
• Form Of Paint: Liquid
• Thickness: 65-75 MICRONS
• Usage/Application: Industrial
• Type: INORGANIC ZINC SILICATE PRIMER

• Solid Volume: 60% App.
• T.S.R. (in m2/ltr./coat): 9.2 - 8

A Solvent based two componant self curing Inorganic Zinc based coating that protects the steel galvanically eliminating sub - film corrosion. It can be over coated with a wide range of Intermediate Finish Coat.

zinc silicate primer These primers are deployed for long term protection of MS in new installation. we have three variants in this products category.

• overing Capacity: 8 to 10 sq.mtrs / ltr

This is a two pack (part A + part B) zinc-ethyl silicate-type primer. Forms a continuous layer of metallic zinc that provides cathodic protection to metal (as in hot galvanization).In clean or mildly corrosive environments, may be applied in a single 75 microns thick coat. In acidic or alkaline environments, must be coated with a top-coat such as chlorinated rubber, vinyl, epoxy or Polyurethane.

• Thinner/Cleaner: Thinner 870 Storage Life : Upto six months as

Recommended for use on steel structurals, exterior of storage tanks, bulk handling equipment, pipelines, etc. The product is suitable for both coastal and industrialinland environments.A two pack solvent base inorganic zinc primer for protection of steel against severe corrosive environment . It provides outstanding cathodic protection and forms a tough abrasion resistant film. It is however, not recommended for contacts with strong acids or alkalis of pH below 5 or exceeding 10. The coating attains water resistance within 30 minutes of application and is unaffected by rain, condensation or dew

• State/Form: Powder
• Surface of Application: Metal
• Brand: Berger

• Packaging Size: 20 L
• Brand Name: Goa Paints
• Finish: Matt
• Primer Base Type: Inorganic Silicate Binder
• Is It Anti corrosive: Anti Corrosive
• Application method: Spray gun
• Is It Waterproof: Waterproof

• Packaging Size: 24 L
• Color: Grey
• Country of Origin: Made in India
• Brand: Berger
• Packaging Type: Drum
• Paint Form: Liquid
• Is It Anti Corrosion: Yes
• Is It Anti Fouling: Yes
• Is It Waterproof: No

• Finish: Matt
• Flash Point: Above 10°C

It contains metallic zinc which provides long term protection from corrosion. It’s potential applications covers areas like structural steel and pipes, tank exteriors, bridges, offshore platforms, marine hulls, superstructures and decks and industries like petrochemical complex, refineries, fertilizer units, pow er plants, smelters, cement plants, paper and pulp plants, transportation industries, chemical plants, etc. It can also be used as a primer for buried pipelines, tanksboilers and structures. It is also recommended as a primer for high temperature areas (Max 400 Deg C). It is advisable to apply subsequent high build intermediate coats.

• Brand: stallion
• Usage/Application: Industrial
• feature: good quality
• Condition: new

3‘s’ two component, moisture curing cathode corrosion protection inorganic zinc silicate coating properties • excellent corrosion protection in highly aggressive environments • excellent solvent resistance. • can withstand substrate temperatures ranging from -90°c to +350°c • excellent resistance to saline and marine offshore atmosphere

We are ranked among Manufacturers & Suppliers of premium Epoxy Inorganic Zinc Silicate in Pune, Maharashtra, India. Our Epoxy Inorganic Zinc Silicate is excellent for protecting metal surfaces from corrosion. It is a great primer used in various industries.

zinc silicate primer, Paint, Industrial Paint, Automotive Paint