S S ISPAT Durg, Chhattisgarh

  • Slag Pot

    Slag Pot

    Request for Price

    24 Ton (MOQ)

    Slag Pot is Required to hold the Slag & Molten Metal during melting process, slag is separated and hold in slag pot to cool down and later on when slag solidify removed from slag pot also on liquid state is poured in slag dump area.Slag pot is Designed according to application process and capacity of slag & metal generated in melting process, like Scrap Melting leads Less Slag where as DRI-Sponge Iron , HBI Briqquete iron Generates More Slag hence Slag Pot should Appropriate to Handle Slag in Quantity rather than weight.We cast Grey Iron Slag Pot in Square & Round Shape with Weight Starting from 2.0 Mt to 25 Mt to Carry Various Quantity of Solid Slag and Metal Handling Applications , We cast SLAGPOT in Various size and Customized Requirements.

    Condition : Good

    Shape : Round

    Material : Cast Iron

    Type : Slag Pot

    Color : Grey

    Surface Treatment : Polishing

    ...more
    Get Best Price
  • Corrugated Moulds

    Corrugated Moulds

    Request for Price

    24 Ton (MOQ)

    We manufacture Corrugated Moulds, Forging Quality Moulds for Steel Mills & Integrated Steel Plants, Special Steel manufacturing plants.SSI is considered as one of the leading manufacturer of Grey Cast Iron Corrugated Mould makers in India.  our expertise in making base plates, slag pot, centre column etc., which are being used by induction furnaces / EAF furnaces for producing Special steel & alloy steel ingots.We offer Customised sizes & weight start from 3.5 Mt to 25 Mt single pc Mould weight , to Hold that amount Physically Cast iron is Graded & Additive with Various Ferro Alloys to give longer life of Corrugated Ingot Mould for multiple heats of Ingot casting.We cast Corrugated Moulds in Various size and Customized Requirements.

    Country of Origin : Made in India

    ...more
    Get Best Price
  • Centre Coloumn and Trumpet

    Centre Coloumn and Trumpet

    Request for Price

    24 Ton (MOQ)

    Centre Coloumn / Trumpet Required is According to capacity of your Liquid Metal Tapping, Height of Tapping Point to Surface of Bottom plate, Size of Ingot you need to Cast and Base Plate Design you are using , Each Factor is Calculated and Dimension derived to give your Ingot casting Perfect & Easy pouring in Tundish to Centre Coloumn through Refractories in Base Plate and Finally to Ingot Moulds to Cast Ingot.Centre Coloumn Weight Starts from 1 Mt to 5 Mt , and is Machined Perfectly that Both Slides to Match without giving any space ,also Intacted with ramming mass during casting to hold the refractories inside Funnel with Grip & Strength.

    Country of Origin : India

    Certification : CE Certified

    Application : Industrial

    Color : Silver

    Condition : New

    Warranty : 1 Year

    ...more
    Get Best Price
  • Casting Cast iron plates

    Casting Cast iron plates

    Request for Price

    24 Ton (MOQ)

    We are Casting Cast iron plates for various applications in steel making process , mostly used in Holding walls , Cooling base , Machine floor and many other process , we offer Plates from 50mm to 150mm thickness and length vary from 1 metre to 12 metre length in plain , perforated and customised design.

    Country of Origin : India

    Type : Cast Iron Plates

    Material : Cast Iron

    Shape : Rectangular

    Thickness : 10-20mm, 20-30mm, 30-40mm

    Certification : ISI Certified

    Length : 100feet, 20feet, 40feet, 60feet

    Application : Industrial

    ...more
    Get Best Price
  • Cast Iron Singlet Ingot Moulds

    Cast Iron Singlet Ingot Moulds

    Request for Price

    24 Ton (MOQ)

    We manufacture Singlet Moulds, Forging Quality Moulds for Steel Mills & Integrated Steel Plants, Special Steel manufacturing plants.We are considered as one of the leading manufacturer of Cast Iron Singlet Mould makers in India.  our expertise in making base plates, slag pot, centre column etc., which are being used by induction furnaces / EAF furnaces for producing Special steel & alloy steel ingots.Singlet Ingot Moulds are also casted in same process as that of Duplex moulds but chemistry of finished product is on higher sight as the ingot weight start from 3.5 Mt to 25 Mt single pc Mould weight , to Hold that amount Physically Cast iron is Graded & Additive with Various Ferro Alloys to give longer life of Singlet Ingot Mould for multiple heats of Ingot casting.Bottom stool plate is Aligned with Singlet Moulds to Cast Ingot in Hot-Top casting process and also Open Top casting process , we cast Singlet Moulds for Various size and Customized Requirements.

    Country of Origin : India

    Size : 10-20inch, 20-40inch, 40-80inch

    Type : Cast Iron Molds

    Material : Cast Iron

    Shape : Rectangular, Square

    Certification : ISO Certified

    Color : Grey

    Feature : Fine Finishing, Hard, High Strength

    Polishing : Polished

    ...more
    Get Best Price
  • Cast Iron Launder

    Cast Iron Launder

    Request for Price

    24 Ton (MOQ)

    Cast Iron easy flow Launder is made of Grey Cast iron, which has feature of high strength , and excellent value for money. Preformed easy flow launder suitable for melting furnace, purifying furnace, casting table and the transportation of molten metal and alloy between furnace degassing and filtration.We cast Launder in Various size and Customized Requirements.

    Material : Cast Iron

    Thickness : 10-20mm

    Length : 5inch, 6inch

    Grade : AISI, ASTM

    Color : Grey

    Feature : Perfect Strength, Rust Proof

    Finishing : Polished

    Hardness : 50 - 60 HRC

    ...more
    Get Best Price
  • cast iron ladle

    cast iron ladle

    Request for Price

    24 Ton (MOQ)

    Material : Cast Iron

    Thickness : 40-50mm

    Color : Black

    Feature : Durable, Fine Finished, Perfect Strength

    Finishing : Polished

    ...more
    Get Best Price
  • cast iron duplex ingot moulds

    cast iron duplex ingot moulds

    Request for Price

    24 Ton (MOQ)

    Our Cast Iron Duplex Ingot Moulds are Casted with Ethnic casting process fused with Modern technique , Selective Sand is Blended with Coal Powder addition of Binding Fluxes & Chemicals like Bentonite , Silica clay with Alumina & Magnetite Ramming mass etc . is manually moulded so that Mould should have Air pass to let various Gases Ejected during casting to give clean metal casting without any gaseous inclusions.Raw material is all used of Prime category Nodular Pig Iron and its contrary chemistry products only , We Never Use cast iron machinery Scrap or any other casted scrap , as once cast iron is casted will never give same thick grains of metal again what we receive in Virgin cast iron.Our Duplex Ingot moulds are used in Induction furnace from capacity of 1 Mt To 15 Mt with our variety of moulds used to cast ingots ranging from 2.5 x 3.5 , 3 x 4 , 3.25 x 4.25 , 3.5 x 4.5 , 3.75 x 4.75 , 4 x 5 , 4.25 x 5.25 , 4.5 x 5.5 , 4.75 x 5.75 , 5 x 6 , 6 x 7 , 7 x 8 in Inches , for various length 48 , 54 , 60 , 65 Inches & Customized Requirements.

    Size : Multisize

    Material : Cast Iron

    Shape : Rectangular, Square

    Application : Machinery

    Color : Grey

    Feature : Fine Finishing, Hard, High Strength

    Polishing : Polished

    ...more
    Get Best Price
  • Cast Iron Circular Pan

    Cast Iron Circular Pan

    Request for Price

    24 Ton (MOQ)

    Circular pan comes mostly in round shape oftenly designed in square shape also depending on usage platform , basically it is also used for similar practice as of slag pots but circular pan is convenient for more metal volume usage and longer holding period applications.We are known for our consistent and satisfactory performance records and preferred by most of Big Steel plants , Ferro Alloys Plants etc etc Across India .We cast Grey Iron Circular Pan with Weight Starting from 2.0 Mt to 25 Mt to Carry Various Quantity of Solid Slag and Metal Handling Applications , We cast Circular Pan in Various size and Customized Requirements.

    Color : Grey

    Application : Used in Ferro Alloy plant

    ...more
    Get Best Price
  • Cast Iron Base Plate

    Cast Iron Base Plate

    Request for Price

    24 Ton (MOQ)

    Our Cast iron Base plates are very well designed to match accuracy of dimensions for placing Ingot Moulds in proper range , we use A graded material only o cast Grey Cast iron base plates for longer life & higher resistance.Mould dimensions are very well taken care so that centre of casting should be in line , surface of plates are maintained in zero level for equal flow through out plate and all mould should perform similar metal uplift.We cast Base Plate in Various size and Customized Requirements.

    Material : Cast Iron

    Shape : Rectangular

    Certification : ISI Certified

    Application : Constructional, Industrial

    Color : Grey

    Feature : Corrosion Proof, Excellent Quality

    ...more
    Get Best Price
  • C I DUPLEX INGOT MOULD

    C I DUPLEX INGOT MOULD

    Request for Price

    Get Best Price
  • Corrugated Moulds

    Corrugated Moulds

    Request for Price

    Get Best Price
  • C I SINGLET INGOT MOULD

    C I SINGLET INGOT MOULD

    Request for Price

    Get Best Price
  • CENTRE COLOUMN / TRUMPET

    CENTRE COLOUMN / TRUMPET

    Request for Price

    Get Best Price
  • C I DUPLEX INGOT MOULD

    C I DUPLEX INGOT MOULD

    Request for Price

    Get Best Price
  • Corrugated Moulds

    Corrugated Moulds

    Request for Price

    Get Best Price
  • C I SINGLET INGOT MOULD

    C I SINGLET INGOT MOULD

    Request for Price

    Get Best Price

Average Customer Rating


5 / 5

Business Rating


5 1
4 0
3 0
2 0
1 0
Write a Review

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Manufacturers
  • Secondary Business Type Exporters / Wholesale Suppliers
  • Year of Establishment 2001
  • No. of Employees Below 20
  • Annual Turnover Below Rs. 0.5 Crore Approx.
  • Ownership Type Individual (Sole proprietorship)

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
S.S.ISPAT, Experiences about Two Decade of Casting in Industrial Castings & Consumable Castings. Consumable castings includes Manhole covers, Frames Gratings etc and Industrial castings for casting Mild Steel Ingots includes Ingot Moulds ( Duplex & Singlet ), Base Plate, Trumpets, Centre Coloumn, C.I. Plates, Circular Pan, Slag Pot etc. We are Situated in the Hub of Indian Steel Industry Bhilai City of Chattisgarh Province of India where casting is culture, Bhilai is Famous for its Indo-Russian Steel Plant which provide world best Virgin Cast Iron Raw-Material i.e Pig Iron, Apart from Bhilai steel plant plenty of other Steel Plant are Providing Nodular Pig iron in our region which Enable us to be away from Scrap, as scrap material casting is rather cheaper but doesn’t give product reliability & strength.
Read More »

Contact Information

S S ISPAT

  • Mr. Dinesh Sahabani
  • 16 Se, Hai, Hathkhoj, Durg, Chhattisgarh
top