Power Cylinder Dealers

・Provides 10 to 20 times the energy absorption capacity of general　purpose cylinder (Series CG1).・Smooth cushioning from high speed operation (3000 mm/s) with　light loads and low/medium speed operation with heavy loads.・XC93 : With greater water resistance + stable lubrication function　5 times stronger against water (liquids) than the standard　model (Series RHC)

Cylinder Assembly With Power Pack 40 hpFeatures:Are designed robust with good aesthetics and are easy to maintain.Efficient use of energy using manifold blocks, threaded cartridges for leak - free operation with reputed make of hydraulic elements and electricals to ensure trouble free operation and productivity.

• Bore Size: 25 to 300mm
• Pressure Range: up to 250 Bar.

Our complete product range is treasured for its specific features such as optimum performance, durability, sturdy construction and technical advancement. We are widely engaged in manufacturing Hydraulic Cylinder inda. We are Hydraulic Cylinder manufacturer and supplier.

High Performance cylinders for modern demands, Construction : Aluminium casting end covers and aluminium square profile semi-hard anodised tube, Polyurethene rod seal ensures long life and high speed, Options : Bellows, viton seals, hollow shaft, rod extension and rod threading, Specials : Reed switch, single acting, stroke adjustable, double ended and duplex.

• Type: Pneumatic Cylinders
• Material: Stainless Steel ,Mild Steel
• Color: Black, Grey, White
• Feature: Easy To Install, Good Quality, Heat Resistant, Unbreakable
• Condition: New, Used
• Shaft Diameter: 20
• Max Pressure: 10 Bar

We are enlisted among the reputed Suppliers and Exporters of Power Cylinders. The Power Cylinders we make available come in different bore sizes ranging from 6” to 12”. It is used to operate dampers and butterfly valves, used for control of ID and FD fans in boilers. We have all the in-house facilities to deliver bulk orders of the Cylinders within the stipulated time.   Bore Sizes : 6” to 12”   Stroke : Upto 20" standard. Higher sizes on request.Specification : Maximum working pressure : 150 Psig Maximum working Temperature : 80oC   Air Consumption : 1.0 SCFM Control Pressure Connection : 1/4" NPT (F) Features : Higher Strokes Stayput action   Application : To operate dampers and Butterfly valves, used for control of ID and FD fans in boilers.

Airmax Make Power Cylinder Consists basically of a double acting pneumatic cylinder with positioner, Filter + Regulator Fitting Accessories. Power Cylinder has been designed to operate as an actuator in a pneumatic control system, to position the final control elements in accordance with the controller signal (3 to 15psi or 0.2 to 1.0 Kgs/Cm² or 4 to 20 mAmp.) Examples Dampers, Butterfly valves, Furnace burner nozzles, ID & FD Fans, etc.

We take pride in introducing ourselves as a prime manufacturer of Swing Cylinders based in India. We are experts in designing, manufacturing and erectioning of Swing Cylinders. We offer superior Swing Cylinders that are developed using finest quality pressure proof steel available in the market that makes them highly durable in nature. We are pioneers in offering Swing Cylinders that are exactly developed with swing of 90" in line with the specifications detailed by our clients. At Clasys, we focus on meeting our clientele demands for durable, affordable, and versatile Swing Cylinders. We keep in mind the future requirements of our clients in mind while designing, developing and erecting our range of Swing Cylinders.

Price : INR 16000 - 20000 -per- Piece(s)

Standard ISO 6431 (UPTO Ø160 mm) Diameter : Ø32 to Ø1100 Stroke : 50 mm to 1800 mm Max. pressure : 10 bar Accuracy : +/- 1% Repeatability: +/- 0.5%

• Pressure: 10 Kg/cm2

Rk power cylinder consists basically of a double acting cylinder, positioner & filter pressure regulator & air lock relays. To operate dampers and butterfly valves, used for control of id and fd fans in boilers.

• Diameter: Ø32 to Ø1100
• Stroke: 50 mm to 1800 mm
• Max. pressure: 10 bar
• Accuracy: +/- 1%
• Repeatability: +/- 0.5%

Doubles the output in the extending direction with a unique structure. 　A built-in non-rotating mechanism using slide keys allows loads to be mounted directly.

• Material: Steel, Aluminium
• Shape: Cylindrical
• Color: Standard
• Type: Single acting, Double acting
• Condition: New
• Brand: FLUIDTECQ
• Model Name/Number: TR-
• Usage/Application: Automation
• Size: 2
• Automation Grade: Automatic
• Pressure Range: upto 10 bar
• Piston Rod: EN8
• Barrel: Aluminium, MS, SS
• Design: ISO 15552, ISO 19973, IS14167, TIE ROD
• Media: Filtered Air
• Bore Size (mm): 32mm to 350mm
• Mounting: Front Rear Flange, Trunnion, Hinge, ball socket, RT, CT, Fork, etc.
• Double Acting: Yes
• Stroke: Upto 1m as standard. For custom stroke, contact us

Hydraulic rams and hydraulic cylinders perform extremely significant roles in modern Engineering, and are heavily used in different domains. Here are some pieces of crucial information on the functionalities of hydraulic rams and cylinders, their parts and the areas they are applied. Hydraulic Cylinder Well known as linear hydraulic motor, it performs the task of producing unidirectional force through a unidirectional stroke. It can be understood as a mechanical actuator. It is made of primarily: Cylinder base Seal gland Cylinder head Cylinder barrel Piston rod Piston and seals.

Airmax Make Power Cylinder Consists basically of a double acting pneumatic cylinder with positioner, Filter + Regulator Fitting Accessories. Power Cylinder has been designed to operate as an actuator in a pneumatic control system, to position the final control elements in accordance with the controller signal (3 to 15psi or 0.2 to 1.0 KgsCm² or 4 to 20 mAmp.) Examples Dampers, Butterfly valves, Furnace burner nozzles, ID & FD Fans, etc.

• Type: Double acting
• Application: Automation
• Material: Aluminium
• Operating Pressure: up to 10 bar
• Packaging Type: Box
• Max operating pressure: 10 bar

The EHPC is a linear integrating actuator typically used for steam turbine control-valve or valve-rack positioning. This actuator uses a low-pressure (80–250 psi 552–1724 kPa) hydraulic oil source and then uses three amplification stages to create the required output shaft force. As a custom (made to order) actuator, the EHPC is an actuator that is configured designed and manufactured specifically for the application. The EHPC has the flexibility to be ordered with the following configuration options: - li Single or double acting cylinder action - li Stroke & cylinder bore options - li Extend or retract current to position direction - li Top or bottom mounting attachment - li Single or dual coil input actuator torque motor - li With or without return spring - li 4–20 mA or 0–10 Vdc cylinder feedback signal - li Optional 1st & 2nd stage oil supply - li 2nd stage spring bias option - li 3rd stage spring bias option p This actuator accepts a 0–200 mA (100 mA null, with an optional 15 mA null) input control signal, to position its output cylinder shaft, and outputs a 4–20 mA or 0–10 Vdc servo position indication feedback signal. An integrating actuator driver (such as a MicroNetTM actuator controller module) or an external servo position driver (such as the Woodward SPC servo position controller) is required to drive and position the EHPC. p The EHPC includes electrical position sensing on the output of the large power cylinder—a combination that, when used with a compatible electronic or digital control, results in powerful steam valve movement with pinpoint accuracy. The EHPC is driven by oil pressure supplied by either the turbine’s lubricating-oil supply or from an external independent oil supply and can be operated in any attitude. EHPC

• Capacity: 5 - 150 tonnes
• Stroke: 6 - 15 mm
• Max Operating: 700 bar (10,000psi)

A cylinder liner is a cylindrical part to be fitted into an engine block to form a cylinder. It is one of the most important functional parts to make up the interior of an engine The cylinder liner, serving as the inner wall of a cylinder, forms a sliding surface for the piston rings while retaining the lubricant within.

• Design: Double Acting Piston Cylinder
• Bore: 2” to 20”
• Stroke: Up to 20” Standard (Larger sizes are available on request)
• Working Pressure: 7.0 Kg/cm2 (Max)
• Temperature Range: -200 C to 800 C
• Sensitivity: 0.5% of Full Stroke
• Control Signal: 0.2 to 1.0 Kg/cm2 (3-15 PSIG)
• Air Consumption: 1.0 SCFM at 80PSIG
• Thrust: Available thrust may be considered as 70% of Cylinder Bore Area multiplied by operating air pressure
• Mode of Action: Linear
• Connection: ¼”/1/2” NPTF/BSPF

Industrial Power Packs & cylinders are made up of non-corrosive materials and are available ready-to-fit. The power packs are designed with all parameters such us weight, heat dissipation, duty cycle, electric power consumption, compactness, reliability and optimization. The Cylinders & power packs are also known as Pneumatic Cylinders & hydro-pneumatic cylinders. These power packs are involved with Construction machines, Agriculture machines and various industrial machines.  

• Size: 125 Stroke
• Use: Use for Auto Machines, like Printing Machines,Packing Machine Etc
• Piston Rod: High Tensile Steel, Ground Hard Chrome Plated
• Seal: Nitrile Elastomer
• End Cover Piston: Close Grained Cast Iron
• Cylinder Tube: 50 Mm Hard Drawn, Polished Brass/ Aluminum Tube

• Bore diameter: 50 mm to 1500 mm - It is the diameter of the cylinder bore.
• Stroke: 20000mm - The length of a stroke could be several feet, or a fraction of an inch.
• Temperature: 20 to 80 degree C.

Hydraulic Cylinder Manufacturers in India offering an exclusive range of hydraulic equipments to the clients.Hydraulic Cylinders are mechanical motors that are widely used for creating a unidirectional force with the help of a stroke. We manufacturer and design these Hydraulic Cylinders in accordance with the industrial standards. We offer these industrial hydraulic cylinders in different pressure ranges based on the requirements of our clients. These hydraulic cylinders offered by us are widely used in various aerospace industries, power plants, marine applications, agro industries and huge machinery processing industries and many more. The hydraulic cylinders offered by us have advanced features and high functional level hence widely appreciated in various sectors.

The PNEUCON Power Cylinders are widely used for accurately and positively positioning all types of plant regulators such as Dampers, ID and FD. fans in Boilers, Throttle Valves and Butterfly Valves.Power Cylinder can be arranged so that increase in control pressure moves the position either outwards or inwards.