PIR Sensor Module Dealers

• Color: White
• Condition: New
• Brand Name: Shoptron
• Color: White

100% brand new with good quality Product type: hc--sr501 body sensor module Operating voltage range: dc 4.5-20v quiescent current: level output: high 3.3 v /low 0 Color: multi-color Package Contents: Set of 5 Adjust Ir Pyroelectric Infrared PIR Motion Sensor Detector Modules Condition:100 percent brand new with good quality product type: hc--sr501 body sensor module operating voltage range: dc 4.5-20v quiescent current: level output: high 3.3 v /low 0. The PIR motion sensor detector module hc-sr501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “pir”, “pyroelectric”, “passive infrared” and “in motion” sensor.

• Type: Dip
• Model: HCSR 501
• Detection Angle: 140 Degree
• Detection Distance: 8 meter
• Model Name/Number: PIR Motion Detector Sensor Module
• Delay Time: 5-200 second
• Operating Voltage: 4.5-20 V DC
• Current Consumption: 60 uA
• Output Type: 3.3 V TTL Output
• Working Temperature: -20 to +80 Deg C
• Motion Detection Speed: 0.6-1.5 m/s
• Dimension: 3.2cm x 2.4cm x 1.8cm

• Manufacturer: Panasonic
• Manufacturer Part Number: AS0019
• Part Status: Inactive
• Contact Form: SPST
• Dimension: φ95×35mm
• Induction distance: 5～8m
• Operating voltage: 110VAC～220VAC
• Brightness sensitivity: 10Lux～500Lux±20%(optional)
• RoHS status: RoHS compliant
• Power consumption: <0.2W
• Load power: 3
• Delay time: 2s～80min±30%(optional)
• Induction angle: about 120°

• Length: 32mm
• Width: 24mm,
• Height: 26mm

The Passive Infrared Sensor (PIR) sensor module is used for motion detection. It can be used as motion detector for security systems or robotics. It works on 5V DC and gives TTL output which can be directly given to microcontroller or to relay through a transistor.It consists of pyroelectric sensor and fresnel lens that detects motion by measuring change in the infrared levels emitted by the objects. It can detect motion up to 20ft. This module is very sensitive to change in infrared levels subjected by human movement.

• Material: Acrylic
• Length (mm): 50
• Width (mm): 40
• Height (mm): 18
• Weight (gm): 8
• Shipment Weight: 0.095 kg
• Shipment Dimensions: 6 5 3 cm

• Color: White + Green
• Model: HC-SR501
• Detection Angle: 140 Degree
• I Deal In: New Only
• Storage Humidity: 98%
• Operating Voltage: 4.5-20 V DC
• Current Consumption: 60 uA
• Output Type: 3.3 V TTL Output
• Working Temperature: -20 to +40 Deg C
• Material: Copper
• Ip Rating: IP67
• Average Current Consumption: 500 mA

• Transfer Speed: 6 Gbps
• Current Range: 0
• Model Number: HCSR 501
• Operating Voltage Range: DC 4.5-20 V
• Quiescent Current: 50 uA
• Blockade Time: 0.25 seconds

• Frequency: 50 to 60 Hz
• Voltage: 110 to 220 V
• Current Rating: 100-200 mA

• Specification: Base on LM393 and Thermal sensor designed,Power supply 3.3V or 5V,Output signal adjustable sensitivity,Set aside one voltage comparator circuit(P3) Etc.

The Thermal Sensor Module is used a thermal senor and a LM393 dual differential comparator. You can use the potentiometer adjust the sensitivity. Once close to the heat source, the D1 state LED will light, and output signal is 1.1V~1.9V.

• Model: HCSR 501
• Operating Voltage: 4.5-20 V DC
• Current Consumption: 50 uA
• Transfer Speed: 6 Gbps
• Current Range: 0
• Blockade Time: 0.25 seconds

Can detect surrounding environment of the humidity and temperature DHT11 sensor adopts Humidity measurement range: 20% ~95% Humidity measurement error: ±5% Temperature measurement range: 0℃~50℃ Temperature measurement error: ±2 ℃ Operating voltage:3.3 V~5 V Output form:digital Has fixed bolt hole and easy installation

The BMP085 is the fully pin- and function compatible successor of the SMD500, a new generation of high precision digital pressure sensors for consumer applications. The universal C-code SMD500/BMP085 (?BMP085_SMD500_API?) is fully upward compatible to SMD500 and recognizes automatically the device ID. The ultra-low power, low voltage electronics of the BMP085 is optimized for use in mobile phones, PDAs, GPS navigation devices and outdoor equipment. With a low altitude noise of merely 0.25m at fast conversion time, the BMP085 offers superior performance. The I2C interface allows for easy system integration with a microcontroller. The BMP085 is based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. Key features Pressure range: 300 … 1100hPa (+9000m … -500m above sea level) Supply voltage: 1.8 … 3.6V (VDDA) and 1.62V … 3.6V (VDDD) Low power: 5?A at 1 sample / sec. in standard mode Low noise: 0.06hPa (0.5m) in ultra low power mode 0.03hPa (0.25m) ultra high resolution mode < 0.1m possible with software averaging algorithm – Temperature measurement included – I2C interface – Fully calibrated New features Smaller package height 1.2mm Faster conversion time (standard mode each) 7.5ms (max.) Faster I2C data transfer max. 3.4MHz max. Extended min. supply voltage min. 1.8V min. Lower stand-by current (typ.) 0.1?A External clock not necessary Typical applications ? Enhancement of GPS navigation (dead-reckoning, slope detection, etc.) ? In- and out-door navigation ? Leisure and sports ? Weather forecast ? Vertical velocity indication (rise/sink speed)

This module integrates DHT11 sensor and other required components on a small PCB. The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit microcontroller inside, and provides calibrated digital signal output. It has high reliability and excellent long-term stability, thanks to the exclusive digital signal acquisition technique and temperature & humidity sensing technology.   Power Supply : 3 to 5.5V DC Output signal : Digital Measuring Range : Humidity 20-90% RH; Temperature 0-50 Celsius   Long-term Stability : +/- 0.5% RH/yearSensing period : Average: 2s

• Type: Motion Sensor
• Brand Name: Generic
• Usage/Application: Automation
• Range: 4 Mtr

• Voltage: 3.3 V
• Weight: 7 gm
• Dimenssion: 3.2 x 2.4 x 2.8cm
• Working Voltage: DC 4.5V- 20V
• Current Drain: 60 uA
• Detection Range: 140 Degree

• Feature: This joystick provides a smooth, fluid motion, strong click reply and a straight forward interface.
• Dimensions:: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)

This module uses a 5V power supply. The PS2 set the two-channel analog output module and one channel of the digital output, the output value respectively corresponding to (X, Y) axis offset, its type is analog; button indicates whether the user pressed in the Z-axis, its type digital switching amount. Module integrated power indicators which show the working status. Applicable on the Arduino sensor expansion board plug.

• Color: green
• Usage/Application: Energy Saving
• Power Consumption: 6 Gbps
• Storage Humidity: 93H
• Rated Load: 36A
• Frequency: 60
• Current Rating In Amps: 0

• Wide Working Voltage Range: DC 4.5V- 20V
• Detection Distance: 3 to 7m
• Work temperature: -20-+80C

• Type: Sensor
• Model Number: Dht11 Sensor Module
• Input Voltage: 220v
• Color: White
• Input Phase: Three Phase

• Features: Repeatable trigger, Automatic induction.
• Applications: Body sensors toys, Body induction lamps, Security Products, Battery-powered automatic control.
• Dimension: 10*23 mm
• Working Temperature: -20 to +80 Deg C
• Model: ML020
• Delay Time: 8 s + /- 30%
• Operating Voltage: 4.5-20 V DC
• Current Consumption: 60 uA

• Output: 3.3V
• Supply Voltage: 5V DC
• Detection Range: 6 mtr
• Settling Time: 60 s
• Size: Length 32mm,Width 24mm,Height 26mm
• Features: Adjustable sensitivity levels (High or Low)
• Pay Mode Terms: T/T (Bank Transfer)

• Color: White
• Application: For security purpose
• Usage/Application: Energy Saving
• Usage: Hotels, Malls, Offices

• Brand: Parallax
• Detection Angle: 360 Degree
• Detection Distance: 12 meter
• Delay Time: 5 to 200 Sec
• Operating Voltage: 3- 5 V DC
• Current Consumption: 60 uA
• Output Type: 3.3 V TTL Output
• Working Temperature: -20 to +40 Degree C
• Motion Detection Speed: 0.6- 1.5 m/s
• Features : Single bit output. Small size makes it easy to conceal. Compatible with all micro controller interface.

PIR Motion Sensor Module, 89 Series Microcontroller Programmer, Usb Cable

pir sensor module, REMOTE SWITCHES, Home Automation System, Modular Switches

PIR Sensor Component Module, Integrated Microcontroller, Sharp Optocouplers

pir sensor module, PIR HVAC Light Switch Wall Mount

pir sensor module, Electronic Components, Humidity Sensor, metal gear motor