Automatic Voltage Stabilizer Dealers in Sector 25, Faridabad

RECON'S Automatic Voltage Stabilizers are Auto Wound Transformers manufacturers having helical coils mounted on a conventional laminated core. Carbon Rollers assembled on a fiber glass carrier board traverse the length of the Coil Track. These rollers are electrically connected to the output terminal and as they are driven over the track, a variable voltage is obtained. Beneath the regulating coil a number of compensating winding are connected in parallel and are short circuited to reduce the effect of core-flux ‘fringing’ and keeps the reactance of the regulator fairly constant at any position of the rolling contact. The variations of more than ± 1% of the rated output voltage of the stabilizers are sensed through solid state relay which sends signals to the controlling servo motor which further drives the roller mechanism in such a direction so as to increase or decrease the voltage and stabilize it to the rated output voltage. Solid State Relay operates on 230 V, 1Ø supply. L.T. Automatic Voltage Stabilizers and Automatic Voltage Regulators holds its potential for units having either L.T. Supply or Low capacity H.T. Connections. The same can be manufactured for Balanced Supply and Unbalanced Loads or Unbalanced Supply and Unbalanced Loads. The range of input supply which the stabilizer is designed for depends upon the voltage condition at the supply point. However some standard ranges for L.T. Stabilizers are as under. Input Voltage Range :300V - 460V340V - 460V360V - 460VOutput Voltage :400/415 ±1% Advantages Of LT Automatic Voltage Stabilizer : Prolonged coil life (15-20 years) under normal working conditions, due to robust winding.The graphite rollers roll, while sliding on the coil track, so contact point of the roller goes on changing which prolongs the life of the rollers.Without lifting the complete assembly, the rollers can be inspected / replaced by opening the top cover only.Can be manufactured for both indoor and outdoor installation.

• Input Voltage (Volts) : 350-450V, 340-460V, 330-470V, 320-480V, 300-500V: Efficiency (Approx) : >99.5%, >98.7%,
• Output Voltage : 400V +/-1%, 3-Phase, 50Hz: Cooling : Natural Oil Cooled (up to 5000kVA) / Air Cooled (up to 4000kVA)
• Type : Indoor / Outdoor: Temperature Rise (Max.) : Designed for 30-35 Deg C above ambient as on top of Oil full load (Against IEC Standard of 45 Deg C)
• Mounting : Uni-directional Wheels: Correction rate : 6-15V/Second (up to 500kVA) and 3-6V/seconds (above 500kVA)
• Wave Form Distortion : Virtually Nil: Duty Cycle : 100% Continuous

We offer Servo Controlled Automatic Voltage Stabilizer. JINDAL'S Automatic Voltage Controllers are Designed to reduce the failure rate of your equipment, optimize the use of power & save energy. Our equipments are suitable for any kind of heavy - duty, industrial load. BENEFITS : 1. Up to 80% reduction in failure rate of electrical equipment. 2. Energy saving up to 10% (up to 30% on lighting load) 3. Reduction in MDI 4. Improvement in Power Factor 5. Uniform quality of end product 6. Improve productivity of the plant PAY-BACK PERIOD : Owing to its high efficiency & associated benefits, the pay-back period for the cost of JINDAL'S stabilizers is generally between 6-12 months and it saves you significant costs in subsequent years through its life. SPECIFICATIONS : 1. Input Voltage (Volts) : 350-450V, 340-460V, 330-470V, 320-480V, 300-500V 2. Efficiency (Approx) : >99.5%, >98.7%, ~98.7%, ~98.5%, >98% 3. Output Voltage : 400V +-1%, 3-Phase, 50Hz 4. Cooling : Natural Oil Cooled (up to 5000kVA) Air Cooled (up to 4000kVA) 5. Type : Indoor Outdoor 6. Temperature Rise (Max.) : Designed for 30-35 Deg C above ambient as on top of Oil full load (Against IEC Standard of 45 Deg C) 7. Mounting : Uni-directional Wheels 8. Correction rate : 6-15VSecond (up to 500kVA) and 3-6Vseconds (above 500kVA) 9. Wave Form Distortion : Virtually Nil 10. Duty Cycle : 100% Continuous 11. Reference Standard : IEC 60076

Automatic Voltage Stabilizers, Auto Transformers