Bursting Strength Tester Dealers in Dlf Industrial Area, Faridabad

• Material: Metal
• Color: Blue and Gray

• Accuracy: plus minus 1% within 10% t o 90% of entire range as per IS 1828 with master gauge
• Item Code: PBD-400
• Features: Bright LED display,Calibration facility available,Feather touch controls
• Lease Count: 0.1Kg per cm2
• Brand: PRESTO
• Material: Mild Steel
• Display Type: Digital
• Size: 540x 600x 450 mm
• Pressure Range: 40 Kg/ cm2

bursting strength tester is a perfect instrument to measure the resistance of a material against the pressure applied. It is widely used in industries to test the bursting strength of the materials like paper, cardboard, rexine, leather, industrial fabric, sheets, etc. A hydraulic pressure is applied to the sample via a rubber diaphragm. The medium for creating hydraulic pressure is glycerine. The test is an escalated test to assess the properties of the material in extreme conditions. The instrument is assembled using a stiff metal base plate with a combination of Autumn Gray and Blue coloured painting and bright zincchrome plating to provide it a rust resistant finish. The laboratory equipment comes with two spare diaphragms, Instruction guide, Electric wiring Diagram, Test foil set and Calibration Certificate traceable to NABL approved Labs

• Pressure Range: 40 Kg/ cm2
• Least Count: 0.1 Kg/cm2
• Accuracy: ± 1% within 10% to 90% of entire range as per IS: 1828

The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the materials quality as compared to the others. Digital Bursting Strength Tester provides a hydraulic load under a rubber diaphragm of a specific area of the sample under test. It can be used to accurately determine the bursting strength of paper, corrugated cardboard, carton box, card board, leather, cloth or synthetic leathers. The bursting strength value is expressed in terms of kgcm². Presto, one of the leading manufacturers of testing instruments offer wide range of paper and packaging instruments. Presto Digital Bursting Strength Tester is utilized for measuring the bursting strength of paperstrong paper-board by submitting it to an increasing uniform hydraulic pressure. The procedure involves preparing the specimen for test and mounting the sample between two circular clamps. The specimen is then, tightened with the help of geared handle provided. The increasing pressure (hydraulic) is then applied by the handle. The diaphragm is expanded till the specimen ruptures. The reading on the digital display is the Bursting strength of the given test specimen in kgcm2.

The bursting strength tester Analogue model is a highly preferred tool for testing the bursting strength of various packaging materials such as filter cloth, uneven boxes and boards, industrial fabric, solid boards of fibers, paper boards, leather, Rexene, plastic films, and sheets. The bursting strength test helps in estimation of the quality of the materials and compares it with other similar materials. The bursting strength of the materials is tested against a specific amount of hydraulic pressure applied on the materials. Other models of this instruments are also available that are as follows - Digital Model, Pneumatic Model, Computerized Cum Digital Model with Manual Clamping,  Computerized Cum Digital Model with Pneumatic Clamping   It is a reliable index for measuring the strength of various materials and packaging products. The equipment is an ideal lab testing instrument to test the materials for their strength, performance and quality. The machine offers high ease of operation. The instrument is properly calibrated for reliable and accurate results. It is used widely in many industries, education institutions, laboratories etc. There are two clamps present in the machine that are lower clamp and upper clamp. The test specimen is basically placed between both the clamps for strong hold. Adequate amount of pressure is applied on the specimen to avoid any slippage. The upper clamp has spiral grooves and the lower clamp has concentric grooves. The strength of the material is measured using the testing instrument in two ways that are manual exertion of pressure and automatic exertion of pressure through rubber structure. The area of application of pressure is circular in shape. When there is application of force, the specimen collapses along with diaphragm. In this way the bursting strength of the material is duly calculated according to the maximum pressure required to be applied on the material for failure. The pressure applied is measured using a Pressure gauge. Output   The strength calculated through this procedure is used to calculate the maximum weight that the material can bear before failure. This helps the engineers in deciding the factor of safety for the material. The results can be easily viewed and assessed in analogue meters, digital screens and in form of graphs of computer screen.   Features:   Easy installation High accuracy for calculation of bursting strength of a material. Highly useful for enhancement of the performance of the products. Easy calibration is possible. Specification:   The instrument is available with an analogue gauge. There are two clamps provided with the equipment that are upper and lower clamps with a diameter of 30.5 mm and 38.1 mm respectively. The fluid in the instrument dis-articulates at a rate of 95cc/minute. With this instrument a pressure of 35 kg per square centimeter can be applied on the specimen for measurement of bursting power. The test fluid that is used in the instrument for creating pressure is glycerin oil. There is a reduction type worm wheel gear box provided with the instrument. The power needed to operate the instrument is ½ KW and has a motor of ½ HP single phase. Related standards- IS1060 Part-I 1987. There is stiff base plate of metal used for assembly of the instrument and is given a nice appearance with autumn grey and blue color. The Equipment is provided with chrome plating for protection from rust. The equipment comes with an instruction manual, NABL certificates and spare diaphragms. 

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220V
• Brand: Testronix
• Display Type: Digital

• Range: 40kg/cm2
• Least Count: 0.1kg/cm2
• Test fluid: Glycerin about 98% purified(lab grade)
• Standard: ASTM D3786, BS 3137, ISO 2758, ISO 3303-1:2012, ISO 3689-1983, IS – 1060 – 1987
• Features: Strong Gripping clamps, Memory to hold up to 9 test reading, Feather touch controls
• MODEL: PBP - 600

Bursting Strength Tester - Digital Pneumatic is provided with digital display and pneumatic clamping system for determination of bursting strength of paper, paper-board, solid fiber board and corrugated board and boxes. The equipment is widely... Bursting Strength Tester - Digital Pneumatic is provided with digital display and pneumatic clamping system for determination of bursting strength of paper, paper-board, solid fiber board and corrugated board and boxes. The equipment is widely used to get the fast and accurate test results, by use of a single instrument. The Electronic Bursting Strength Tester provides rapid test sequence through coordinated automatic controls for clamping and testing cycles. An electronic pressure transducer provides a high level of accuracy and excellent reproducibility of test results. The digital display is built on a state-of-the-art robust circuitry platform to ensure repeated performance after years.

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220
• Brand: Testronix
• Display Type: Digital