Cementing Plugs Dealers in Faridabad

• Type: Cementing Plugs
• Shape: Cylindrical Round
• Application: Oil Drilling
• Feature: Good Quality, High Pressure Bearing Capacity, Temperature Resistance
• Condition: New
• Country of Origin: India

CONVENTIONAL TOP & BOTTOM PLUG Plugs are available in Nitrile, Viton, Aflas and other elastomers. Plugs are available in conventional and Non-Rotating Design. Plugs are PDC drillable Maximum temperature  rating 400°F Non-Rotating profile reduces the drilling time Oil Resistant

We deal in Cementing Rubber Plugs are offering cementing rubber plug designed with plastic core and aluminum core. This helps to compliment its line of plugs to decrease drill out times. The Cementing Rubber Plug is used for separating the cement slurry from the mud. Our range of Cementing Rubber Plugs have solid top plug and the bottom plug is hollow. They can all be drilled out with PDC bits. The material of the Cementing Rubber Plug body is Acrylonitrile- Butadiene rubber. It is heat-resisting and tough and the core is made of a glass-filled high strength Phenol resin core. Attributes : The tapered base fits the cavity of the bottom plug for a positive seal. The fins and tail section provide positive wiping action. Fins also serve as a seal while cementing A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through. The cementing rubber plugs are available in sizes 4 12" to 20". It prevents the mud from blending into the cement slurry to influence the cementing quality.

• Type: Cementing Plugs
• Shape: Cylindrical Round
• Color: Black
• Feature: Good Quality
• Condition: New
• Sizes: 2 7/8” to 30” + any special size on customer request.

Sledge Hammer Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required. These plugs are completely PDC drillable. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit. Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.

We manufacture a complete line of downhole oilfield wiper plugs. Sizes range from 312 tubing plugs to 20casing plugs. We offer standard rubber covered plugs with aluminum cores and premium, PDC drillable, plugs molded from urethane. Our standard elastomer for our rubber plugs is SBR. We also offer Nitrile, HNBR and Fluorocarbon (FKM) for higher temperature applications and XNBR for higher wear resistance. These materials are available in both our top and bottom plugs. Our Urethane coverUrethane core plugs are rated to 250�° F while our SBR coverAluminum core plugs are rated to275�° F and our Nitrile coverAluminum core plugs are rated to 325�° F. All of our bottom plugs have rupture diaphragms rated at 125300 psi. Listed to the right are the plug casing size, casing weight and material from which the plugs are manufactured. RA is rubber cover and aluminum core. UU is urethane cover and urethane core. RU is rubber cover and urethane core.

Neeraj Rubber Industries wiping plug manufacturer provide mechanical wiping action to help remove dispersed mud from the casing of drilling pipe and reduce the chance of contamination of cement. Find out how they work- A bottom wiping plug is pumped before the cement slurry. It wipes out any remaining drilling fluid from the casing as it moves slowly down the string. When the entire volume of cement has been pumped, a top plug is used to pump it behind the slurry. These plugs incorporate less material for better drill ability. Wiping plug aids in effective fluid displacement and making wiping efficiency in the pipe strings during cementing. Advanced casing solutions can determine the type of wiping plugs for the individual needs of each type. We are one of the best wiping plug manufacturer in India.

Sledge Hammer Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required. These plugs are completely PDC drillable. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit.   Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.

• Type: Cementing Plugs
• Material: Aluminium, Cast Nylon
• Shape: Cylindrical Round
• Application: Oil Drilling Industry, Oil Field
• Application: Oil Drilling
• Color: Black, Blue, Grey, Red, Yellow
• Feature: Chemical Resistance, Good Quality, High Pressure Bearing Capacity, Temperature Resistance
• Condition: New, Used

We are the main supplier of this product.

We manufacture a complete line of downhole oilfield wiper plugs. Sizes range from 312” tubing plugs to 20”casing plugs. We offer standard rubber covered plugs with aluminum cores and premium, PDC drillable, plugs molded from urethane.Our standard elastomer for our rubber plugs is SBR. We also offer Nitrile, HNBR and Fluorocarbon (FKM) for higher temperature applications and XNBR for higher wear resistance. These materials are available in both our top and bottom plugs.

aluminium core cementing plug to Compliment its line of plugs to decrease drill out times. The cementing plug is used for separating the cement slurry from the mud .It can prevent the mud from blending into the cement slurry to influence the cementing quality. Structure features: The top plug is solid .The bottom plug is hollow. They can all be drilled out with PDC bits. The material of the plug body is acrylonitrile- butadiene rubber. It is heat-resisting and tough. The core is made of a glass-filled high strength phenolic resin core. The tapered base fits the cavity of the bottom plug for a positive seal. the fins and tail section provide positive wiping action. Fins also serve as a seal while cementing. A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through.

bottom cementing plug, spiralizer, Reamer Shoe, non rotating cementing plug

Cementing Plugs, Cement Machinery, Centralizer, Float Shoe, Float Collar

top cementing plugs, Centralizer, Float Shoe, bottom plugs, Hammer Union

Cementing Plugs, Hinged Non Welded Bow Spring Centralizer

The cementing plugs contains Standard Cement Plug and Non-Rotating Cement Plug. The plugs maintain separation of cementing fluids, wipe casing walls clean, and prevent cement contamination. When bumped against a float collar, they provide positive indication of displacement and casing sealability.

Conventional Aluminum Insert Cementing Plug -SH16 AL

Cementing Plugs, Solid Rigid Centralizer, Pressed Steel Couplers