Cenlub Industries Limited Ballabhgarh, Faridabad, Haryana

Type : Hydraulic Over Pressure Reversing Valve

Feature : Casting Approved, Durable, Easy Maintenance., Smooth Finish And Robust Design

Pattern : Plain

Condition : New

Pump is pneumatically operated i.e. through pneumatic line, connected to the ports of cylinder. The cylinder is built in with the pump. During ON period of the pneumatic line, piston inside the cylinder is pushed, ejecting out pressurized grease from the outlet port of the pump body. During reverse flow of pneumatic line, grease is sucked through the suction port in the pump. Spring force through follower plate exerted on the top surface of the grease (filled in the reservoir) makes the suction of the grease positive and easier. The grease thus filled in cylinder is ready for ejection. Pump is mounted on machine frame.

Oil Circulatory System (OCS) Lube Oil System (LOS) - In this type of system, the oil is continuously supplied to various moving parts and bearings. The oil not only acts as a lubricant, but also as a coolant by consuming the heat generated in the bearingsmoving parts. The oil after lubrication is returned to the reservoir. These systems are large, employing reservoirs of capacities ranging from a few hundreds of liters to thousands of liters. The pumps are of heavy duty, intended for continuous running, with flow rate ranging from few tens of LPM to few thousands of LPM. These systems are widely used for plants like Cement, Sugar, Paper, Power generation, Steel as well as for heavy duty machineries. Generally, there are a number of points to be lubricated in any of the above mentioned plants. These lubrication points being various gear boxers, bearings, gears, etc. Depending upon the density of these points in a particular area, a common OCS is taken which feeds all these points. The return lines from each of these points are fed back to the reservoir of OCS. The OCS is generally placed in a basement and returning oil runs under the force of gravity by itself. All return lines have a slant towards the OCS so that returning oil doesn't give any back pressure to the oil in the delivery lines. Depending on the complexity of the system and the fund availability, the pressure and flow in each line can be governed through a set of control valves.

Electronic Controller are high performance solid state instruments, intended for automatic control and monitoring of CENLUB centralised lubrication systems.It provides precision control of lubrication cycle. It also has the facility of monitoring oil pressure and low oil level in the reservoir. Visual indications are given on the front panel to give "lub fault" or "fill oil" display.