Crimson Oil Tools Private Limited Pali Road, Faridabad, Haryana

Our company manufactures and supplies a wide range of Stab in Float Collar. The Stab in Float Collar is used in general technical casing, oil-string casing, and deep well and extra deep well. Our range of Stab in Float Collar is connected with casing. Crimson offers inner string cementing equipment with or without a latch-in feature on the stinger. The Stab in Float Collar provides all the benefits that come with inner-string cementing including the option to run one or more shoe joints and the option to displace the cement below the Float Collar without creating a wet shoe.Attributes : Internal parts are made of high quality material to achieve high strength and PDC drillable. The Stab-in Float collar is also available in Double Valve. Crimson Stab-in Float collar are available for casing Sizes 9 5/8” to 30”  The lower end is pin threaded.

Our collection of Single Piece Centralizer is manufactured from a single piece of heat-treated steel giving a hardened and tempered surface that result in greatly reduced torque and drag losses. The Single Piece Centralizer offer high fatigue strength for axial forces and radial side loads on bows during tubular rotation. Our specially designed Single Piece Centralizer, eliminate the risk of loose part or welding failure as it is all made from one single piece using state of the art manufacturing process and material. The Single Piece Centralizer can be installed with two stop rings, one internal stop ring or casing couplings. The blades, top and bottoms rings are made of one piece to ensure the Centralizer’s integrity during rig operations.Attributes : It is generally shipped in assembled condition only. The Centralizers undergoes a special process of rust prevention before powder coating. The Single piece centralizers are available in sizes 4½" to 20”. (Any special sizes or combination can available on request). Runs in close tolerance applications mainly on liners.

Our company is instrumental in manufacturing and supplying Reamer Shoe, which is designed specifically to be installed on Casing or Liner and Screen. In such areas, the operators had concerns about potentially difficult wellbore conditions such as, swelling shale's, ledges and washed out areas of wellbore, post drilling and prior to running casing. The aluminum eccentric guide nose climbs ledges and negotiates obstructions while the cutting structure reams out tight spots or obstruction in the wellbore. Compatible with all casing and liner hanger assemblies, the Reamer Shoe provides highly effective protection- against unexpected or anticipated casing and liner running problems, and has been specifically designed for potentially difficult wellbore conditions. Reamer Shoe has high strength profiled alloy nose to anchor even in uncured cement and facilitate ease of drill out.Attributes : The aluminum eccentric nose is easily drilled with both PDC and Rock bits. The chip breaker holes in the nose assembly are designed to create small aluminum chips. Improved drill out times without compromising the reaming capabilities, a reduction in NPT and increased opportunities to reach TD. Reamer Shoes are available in Sizes from 2 7/8” to 20” or other special combinations as per requirements.

We manufacture and supply uniquely profiled Rigid Bows that simultaneously provide the operator with those features found desirable in both spring bows. The result is a Rigid Bows Centralizer that far exceeds the performance standards set forth in API Specification 10D. The spring characteristics of its double crested profile permit compression to facilitate movement through tight spots and dog legs. High quality Rigid Bow Centralizer made of special alloy steel with uniform hardness provides optimum performance. The Rigid Bow Centralizer is available in a range to accommodate any well profile. Attributes : The bows with extended profile prevent them from hitting against casing collars. The bows are available in a range to accommodate any well profile. Semi Rigid Bow Centralizers undergo a special process of rust prevention before powder coating. Rigid Bow Centralizers are available in sizes 4½" to 20". Recommended for use with all standard casing grades.

We manufacture and supply a full line of high Quality Hammer Unions.  The Hammer Unions are designed as heavy duty, high pressure flow line connectors.  Our collection of Hammer Unions come in different sizes, shapes and pressure ratings, and when used correctly they are a safe and reliable means of transporting fluid. The Hammer Unions are high-pressure threaded or welded connections with two halves a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half. Hammer unions for sour gas service are specially heat-treated for controlled hardness and utilize fluorocarbon elastomeric seal rings.Attributes : Crimson Hammer Unions are available in sizes 1" to 12". Hammer unions are in a wide range of sizes and in working pressures of 15,000 psi. The Hammer Union is commonly found in chemical plants, on marine dredging vessels, in strip mines and in the oil industry All Hammer unions provide pressure-tight, positive sealing and are available for standard service and sour gas models

Our company is a prominent Manufacturer and Supplier of Crimson Flapper-Type Float Collar. The Flapper-Type Float Collar is designed for use in spring-loaded float equipments. Our assortment of Flapper-Type Float Collar is particularly well-suited for holes where the hole is not filled with fluid prior to running casing. The heavy-duty aluminum Flapper-Type Float Collar is mounted on an aluminum disk and is seated firmly against the 1/4" inch rubber seat by the valve spring.Attributes : It is used where circulation is not needed to wash away bridges or condition the hole prior to cementing. The Flapper valve and valve seat are designed to provide a firm seal when the valve is closed. The back-pressure Flapper valve seals where circulation stops Crimson Flapper Type Float Collar is available for casing Sizes 3 1/2” to 20”.

Our company is a prominent Manufacturer and Supplier of the Double Valve Float Shoe.The Double Valve Float Shoe has all of the features of the standard cement Float Shoe. Our array of Double Valve Float Shoe provides the added assurance of sealing when debris prevents the upper valve from closing. The nose area of Double Valve Float Shoe is designed with a combination of both concrete and aluminum.Attributes : Internal parts are made of high quality material to achieve high strength and PDC drillable. Double Valve Float Shoe is also available in Side -jet, down-jet Port. Crimson Double valve Float Shoe are available for casing Sizes 3 ½” to 30”. Stringent performance tests are carried out on the Double Valve Float Shoe before final dispatch.

Our company is a leading Manufacturer and Supplier of the Double Valve Float Collar. Our assortment of Double Valve Float Collar has all of the Features of the standard cement Float Collar and provides the added assurance of sealing when debris prevents the upper valve from closing. Internal parts of the Double Valve Float Collar are made of high quality material to achieve high strength.Attributes : The Double Valve Float Collar is PDC drillable. It is also available in Non-Rotating Plate that is require with Non Rotating Cementing Plugs. Crimson Double Valve Float Collar are available for casing Sizes 3 ½” to 30” The design allows maximum circulation in horizontal and vertical direction.

We specialize in manufacture and supply of Crossover Subs has two main applications. They can be used to cross over from one connection size to another, or as a disposable part used to prolong the life of more expensive drill stem components. We deal in Crossover Subs utilizing 4140 Q&T Alloy Bar; the heat treatment allows us to maintain a 28-32 Rockwell Hardness. The threaded connections are also protected by a durable phosphate surface coating that helps reduce galling during the initial make-up. All of the Crossover Subs are manufactured to conform to API specifications. The offered Crossover Snub products are provided with BOX x PIN, BOX x BOX or PIN x PIN connections.API Reg PIN x API Reg BOX : 2 3/8” PIN X 2 3/8” BOX (Overall Length 230mm) 2 3/8” PIN X 2 3/8” BOX (Overall Length 430mm) 2 3/8” PIN X 3 1/2” BOX (Overall Length 260mm) 2 7/8” PIN X 2 3/8” BOX (Overall Length 230mm) 3 1/2” PIN X 2 3/8” BOX (Overall Length 260mm) 3 1/2” PIN X 2 7/8” BOX (Overall Length 305mm) 3 1/2” PIN X 3 1/2” BOX (Overall Length 280mm) 3 1/2” PIN X 3 1/2” BOX (Overall Length 540mm) 3 1/2” PIN X 4 1/2” BOX (Overall Length 300mm) 4 1/2” PIN X 3 1/2” BOX (Overall Length 300mm) 4 1/2” PIN X 4 1/2” BOX (Overall Length 300mm) 6 5/8” PIN X 4 1/2” BOX (Overall Length 300mm) 2 7/8” PIN X Short thread 2 3/8” BOX (Overall Length 230mm) API Reg PIN x API Reg PIN : 2 3/8” PIN X 2 3/8” PIN (Overall Length 280mm) 2 3/8” PIN X 2 3/8” PIN (Overall Length 430mm) 2 3/8” PIN X 3 1/2” PIN (Overall Length 280mm) 2 3/8” PIN X 3 1/2” PIN (Overall Length 430mm) 3 1/2” PIN X 3 1/2” PIN (Overall Length 280mm) 3 1/2” PIN X 3 1/2” PIN (Overall Length 430mm) 3 1/2” PIN X 2 3/8” PIN (Overall Length 300mm) 4 1/2” PIN X 4 1/2” PIN (Overall Length 280mm) API Reg BOX x API Reg BOX : 2 3/8” BOX x 2 3/8” BOX (Overall Length 280mm) 2 3/8” BOX x 2 7/8” BOX (Overall Length 240mm) 2 7/8” BOX x 3 1/2” BOX (Overall Length 240mm) 3 1/2" BOX x 2 3/8” BOX (Overall Length 260mm) 3 1/2” BOX x 3 1/2" BOX (Overall Length 280mm) 3 1/2" BOX x 4 1/2” BOX (Overall Length 300mm) 4 1/2” BOX x 4 1/2” BOX (Overall Length 230mm) 6 5/8” BOX x 3 1/2” BOX (Overall Length 300mm) 6 5/8” BOX x 4 1/2” BOX (Overall Length 300mm) 6 5/8” BOX x 6 5/8” BOX (Overall Length 300mm)

We deal in Cementing Rubber Plugs are offering cementing rubber plug designed with plastic core and aluminum core. This helps to compliment its line of plugs to decrease drill out times. The Cementing Rubber Plug is used for separating the cement slurry from the mud. Our range of Cementing Rubber Plugs have solid top plug and the bottom plug is hollow. They can all be drilled out with PDC bits. The material of the Cementing Rubber Plug body is Acrylonitrile- Butadiene rubber. It is heat-resisting and tough and the core is made of a glass-filled high strength Phenol resin core. Attributes : The tapered base fits the cavity of the bottom plug for a positive seal. The fins and tail section provide positive wiping action. Fins also serve as a seal while cementing A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through. The cementing rubber plugs are available in sizes 4 12" to 20". It prevents the mud from blending into the cement slurry to influence the cementing quality.

Our company is a leading Manufacturer and Supplier of Cement Guide Shoe. Cement Guide Shoe is manufactured to match customer casing specification. Slip-ON type Guide Shoe O.D. matches with the casing O.D. and upper end is only beveled, not recessed for directly welding to the Casing pipe. All Cement Guide Shoes are PDC drillable. The Cement Guide Shoe may be used in combination with any type of collar.Attributes : The rounded Cement nose with a generous radius assures smooth running. It has flat-finished concrete tops to provide strong surfaces for landing cement plugs. The Cement Maximizes Shock Resistance and Minimizes drill-out time Crimson Cement Guide Shoe is available for casing Sizes 3½” to 30”.

Our company is a renowned Cement Basket Manufacturer and Supplier. The Cement Basket is an effective aid in retaining and supporting the cement where weak formations and stage cementing is encountered. Our array of Cement Baskets is designed with flexible bow springs, heat-treated under controlled conditions for maximum strength and uniformity. The Cement Basket is welded to slip-on collars and overlapping metal fins for flexibility and strength to support long columns of cement during primary cementing operations. Attributes : The Cement Baskets are not infected by the temperature and causticity liquid and can be used with relevant small casing. This type of Cement Basket can be rotated and reciprocated. It is available in hinged type welded cement Basket. The Cement Basket is available in sizes 4½" to 20".

We manufacture and supply Straight Solid Rigid Centralizer applicable for horizontal and highly deviated well designs. The Straight Solid Rigid Centralizer center casing can assist in aligning casings through well heads near surface. Our range of Straight Solid Rigid Centralizer can be attached to the casing with set screws located between each vane, preventing casing rotation or reciprocation during cementing operations. If the casing is rotated or reciprocated during cementing operations, the Straight Solid Rigid centralizer can float on the casing joint between the stop rings. A flexible ceramic coating can be applied to the entire system to reduce friction. Attributes : The Centralizers are wellhead friendly and have high impact with shock resistance, along with optimum tensile and yield strength. The Straight Rigid Centralizer is normally 8" long but it can be manufactured to any length the customer requires. The Centralizers are available with or without set screws for eliminating of stop collars. Straight Solid Rigid Centralizer are available for casing Sizes 4 ½” to 20”

Our Spiral Solid Rigid Centralizer are designed to meet the needs for better cementing in high deviated and horizontal well. The smooth spiral 360 overlap solid vane design of Spiral Solid Rigid Centralizer provides wall Bore contact that will not damage wellhead equipment. The 30o slope of the vane ends reduce drag and aid the casing in reaching TD. We manufacture and supplies Spiral Solid Rigid Centralizer rigid are cast of a high grade aluminum alloy with one-piece construction. They give optimum flow area in highly deviated and horizontal wells .Spiral Rigid Centralizers increases induced swirl that increases the displacement efficiency.Attributes : The solid cast aluminum Centralizers binds with high tensile and yield strengths as well as corrosion resistance. Casting not only makes a well designed touch tool but reduces manufacturing costs. The Spiral solid Rigid Centralizer is aluminum / Zinc centralizer with similar design features of the steel solid Rigid Centralizer. The spiral blade Solid rigid Centralizers are available in R/H and L/H side. Spiral Solid Rigid Centralizer are available for casing sizes 4 ½” to 20”. It has high impact and shock resistance command fluid swirl.

We manufacture and supply Stab in Float Shoe, which belongs to inner string cementing range. The Stab in float shoe consists of a shell, cement, self-motion grout valve, stab in sub, O ring and stab-in pipe carrier. Our array of Stab in float shoe helps in cementing in big diameter casing, through drill pipe inserts into the stab-in pipe carrier of Stab in Shoe to achieve well cementing. This method can reduce cement wastage and avoid using big diameter plugs in general cementing well. Internal parts of the Stab in Float Shoe are made of high quality material to achieve high strength and PDC drillable.Attributes : The Stab-in Float Shoe is also available in Double Valve. Crimson Stab-in Float Shoe is available for casing Sizes 9 5/8” to 30”. Stab-in float shoe have the features of high-temperature, good sealed, drill ability and connecting easily. It is used in general technical casing and oil-string casing, also used in deep well, extra deep well and special technology well. Stab in Float shoe is designed with a taper in the top of the concrete to guide the adapter on the bottom of the inner-string into the receiver incorporated in the float shoe or collar.

crimson offers a complete range of Non Weld Bow spring Centralizers which are designed and manufactured as per API Spec 10D. Non Weld Bow centralizers are used to position the casing in the centre of the wellbore in vertical, deviated as well as horizontal wells.The Non Weld Bow Centralizers combine the highest Non Weld Centralizer restoring force with the lowest starting force. High quality Bows made of special alloy steel with uniform hardness provide optimum performance. The bows with extended profile prevent them from hitting against casing collars. The bows are available in a range to accommodate any well profile. Hinge locking pins are of high strength steel for maximum structural robustness . Bows are then Flattened several times on a special machine to get permanent setting. Bows can be configured for any hole Size from choice of five standard bow heights for optimum starting and restoring forces.Non Weld design features self-locking of lips for holding bows to end collars . Centralizers undergo a special process of rust prevention before powder coating . The Non Weld Bow spring centralizers are available in sizes 4�" to 24".

Crimson Non Weld Turbolizer with metal fins installed on the bows to help induce turbulence in the cement slurry during pumping operations. Like the spring bows, the fins are made of heat-treated alloy steel. This makes them flexible, which minimizes damage while moving down hole. Meet API Specification 10-D requirements for Starting, Running and Restoring Force in most casing and hole combinations. The fins direction can be made in both right and left hand versions to assist in the uniform displacement of the cement. Collars are of widened design for greater frame strength and to prevent bows hitting casing. Integral hinges are designed to wrap to the inside and are with eight sections and seven shear points for minimum disorientation even under severe stress. Turbolizers are available in the same sizes and bow heights as centralizers. Turbolizer undergo a special process of rust prevention before powder coating.Hinged Non Welded turbolizer are available in sizes 4�" to 20".

Crimson Non weld Positive Centralizer are Provided with rigid bows of U – Profile design instead of spring bows to ensure maximum fluid passage and reduces frictional drag force in deviated hole conditions . They provide almost 100% standoff when run inside a cased hole . The flat U profile is fitted in self locking retaining lips for firm and positive hold. Bows can be selected to meet any hole Size from a choice of ten standard U profile depths and bow heights. Positive Centralizers undergo a special process of rust prevention before powder coating.Hinged Non Weld Positive Centralizer are available in sizes 4½" to 20".

This Crimson product features uniquely profiled bows that simultaneously provide the operator with those features found desirable in both spring bow and rigid centralizers. The result is a centralizer that far exceeds the performance standards set forth in API Specification 10D. The spring characteristics of its double crested profile permit compression to facilitate movement through tight spots and dog legs. . High quality Bows made of special alloy steel with uniform hardness provide optimum performance. The bows with extended profile prevent them from hitting against casing collars. The bows are available in a range to accommodate any well profile. Semi Rigid Bow Centralizers undergo a special process of rust prevention before powder coating.Hinged Non Weld Semi Rigid Bow centralizers are available in sizes 4�" to 20".

CRIMSON Hinged Welded bow spring centralizer is designed with very low starting and running force while giving the substantial restoring force. These centralizers are designed to exceed the performance requirements of API Specification 10D for both starting and restoring forces. High quality Bows made of special alloy steel with uniform hardness provide optimum performance. The bows with extended profile prevent them from hitting against casing collars. The centralizers have spring Bows strongly welded onto the outside of the end collars under required temperature and condition with correct grade electrode. Design and processing features for hinges, hinge pins , bow springs are similar as non weld bow spring centralizers. Centralizers undergo a special process of rust prevention before powder coating.The Hinged Welded Bow spring centralizers are available in sizes 4�" to 20".

Crimson welded slip On bow centralizer Operational and general design features are the same as Hinged Welded bow Centralizers. The centralizers have spring bows strongly welded onto the outside of the slip-on end collars under required temperature and condition with correct grade electrode. These centralizers are normally run between two stop collars or over a slip-on type stop collar to provide the casing / liner a smooth bearing surface. Centralizers undergo a special process of rust prevention before powder coating.The Slip On Welded Bow spring centralizers are available in sizes 4�" to 20".

Crimson Slip On Welded Spirolizer are specially designed for centralization of casing pipe in highly deviated and horizontal wells. The steel construction ensures extra strength and superior toughness. The design of the blades provide minimum friction reducing drag forces while running in the pipe. The Spirolizer have Spiral Vanes strongly welded onto the outside of the slip-on end collars under required temperature and condition with correct grade electrode. Vanes can be selected to meet any hole-diameter from a choice of seven boat profile depths. The Spirolizers are available in R/H , L/H Side Spiral Vanes and Straight Vanes which resist high side loads. Slip On Welded Spirolizer is shipped in assembled condition only. The Spirolizer undergo a special process of rust prevention before powder coating. The Slip On Welded Spirolizer are available in sizes 3�" to 13 3/8".

CRIMSON STEEL SOLID RIGID CENTRALIZER It makes the casing centralized in wellbore and improves cementing quality. Features: Rigid Centralizers are an integral part of the cementing process. They provide the mechanism that centres the casing in the hole and allows uniform cement flow around the casing to help protect it at all points. Several styles of centralizers are available for matching different well specifications and hole sizes, including turbulence generating designs that help clean the annulus and distribute the cement more evenly and uniformly. All models offer ample clearance for fluid passage and are extra effective in centering the casing, even in highly deviated holes and improve cement flow by reducing the effects of channeling. Spiral blades increase annular turbulence. With the shape of stream- lined, it enables casing run easily in wellbore. Both straight blade and spiral blade are available. The material can be cast steel or cast aluminium. Crimson Steel Solid Rigid Centralizer are available for casing Sizes 4 ½” to 20”