Digital Bursting Strength Tester Dealers in Dlf Industrial Area, Faridabad

Bursting strength tester is the most widely used machine in industries where raw materials like paper, cardboard, cloth, rexine, leather, foil, etc. is used. This machine is used to check the bursting strength of the material. It works on the very simple principle of applying pressure until sample ruptures. The pressure is not applied directly on the sample. A hydraulic pressure is applied via rubber diaphragm. The medium of pressure will be glycerine oil. Calculating the bursting strength is the perfect way to calculate one of the properties of the material. The machine is made up of high quality parts and has very low maintenance. It comes with some low-cost consumables like diaphragm and glycerine which can be replaced without any hassle in case of wear and tear. The life of diaphragm depends on the number of the tests performed. To perform the test, the sample is clamped in the annular clamp. It is always advised to clamp the sample with nominal pressure. If the clamped sample is loose, it will tend to slip after the application of pressure. If it is too tight, more than required pressure need to be applied. This results in inaccurate readings. The machine is very simple to operate and it comes with a calibration certificate. The machine comes with a bright digital display. The testinginstrument is very easy to operate. It indicates digital readings. It provides consistent, repeatable and reliable data. It has TARE facility. The lab equipmenthas Digital LED display. It has peak hold facility for maintaining the highest value in the memory. It has Calibration facility is available. The laboratory instrumentalso has feather touch controls. Single Push Button Operation Microprocessor based display for accurate test results Memory to hold up to 9 test reading Highly accurate test results under multidirectional Force Strong Gripping clamps Grooved structure of Test Specimen Holder to avoid slippage and intact holding of specimen under test No slippage in case specimen is tightened uniformly using operating wheel  

• Accuracy: plus minus 1% within 10% t o 90% of entire range as per IS 1828 with master gauge
• Item Code: PBD-400
• Features: Bright LED display,Calibration facility available,Feather touch controls
• Lease Count: 0.1Kg per cm2
• Brand: PRESTO
• Material: Mild Steel
• Display Type: Digital
• Size: 540x 600x 450 mm
• Pressure Range: 40 Kg/ cm2

• Motor:: 1/4 HP Single Phase, 1440 rpm

Presto’s bursting strength tester is a perfect instrument to measure the resistance of a material against the pressure applied. It is widely used in industries to test the bursting strength of the materials like paper, cardboard, rexine, leather, industrial fabric, sheets, etc. A hydraulic pressure is applied to the sample via a rubber diaphragm. The medium for creating hydraulic pressure is glycerine. The test is an escalated test to assess the properties of the material in extreme conditions. The instrument is assembled using a stiff metal base plate with a combination of Autumn Gray and Blue coloured painting and bright zincchrome plating to provide it a rust resistant finish. The laboratory equipment comes with two spare diaphragms, Instruction guide, Electric wiring Diagram, Test foil set and Calibration Certificate traceable to NABL approved Labs.

The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the materials quality as compared to the others. Digital Bursting Strength Tester provides a hydraulic load under a rubber diaphragm of a specific area of the sample under test. It can be used to accurately determine the bursting strength of paper, corrugated cardboard, carton box, card board, leather, cloth or synthetic leathers. The bursting strength value is expressed in terms of kgcm². Presto, one of the leading manufacturers of testing instruments offer wide range of paper and packaging instruments. Presto Digital Bursting Strength Tester is utilized for measuring the bursting strength of paperstrong paper-board by submitting it to an increasing uniform hydraulic pressure. The procedure involves preparing the specimen for test and mounting the sample between two circular clamps. The specimen is then, tightened with the help of geared handle provided. The increasing pressure (hydraulic) is then applied by the handle. The diaphragm is expanded till the specimen ruptures. The reading on the digital display is the Bursting strength of the given test specimen in kgcm2.

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220
• Brand: Testronix
• Display Type: Digital

• Range: 40kg/cm2
• Least Count: 0.1kg/cm2
• Test fluid: Glycerin about 98% purified(lab grade)
• Standard: ASTM D3786, BS 3137, ISO 2758, ISO 3303-1:2012, ISO 3689-1983, IS – 1060 – 1987
• Features: Strong Gripping clamps, Memory to hold up to 9 test reading, Feather touch controls
• MODEL: PBP - 600

Bursting Strength Tester - Digital Pneumatic is provided with digital display and pneumatic clamping system for determination of bursting strength of paper, paper-board, solid fiber board and corrugated board and boxes. The equipment is widely... Bursting Strength Tester - Digital Pneumatic is provided with digital display and pneumatic clamping system for determination of bursting strength of paper, paper-board, solid fiber board and corrugated board and boxes. The equipment is widely used to get the fast and accurate test results, by use of a single instrument. The Electronic Bursting Strength Tester provides rapid test sequence through coordinated automatic controls for clamping and testing cycles. An electronic pressure transducer provides a high level of accuracy and excellent reproducibility of test results. The digital display is built on a state-of-the-art robust circuitry platform to ensure repeated performance after years.

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220V
• Brand: Testronix
• Display Type: Digital