Drilling Equipment Dealers in Sector 24, Faridabad

• Type: Bridge Plug
• Application: Oil Drilling Industry
• Condition: New
• Finishing: Polished
• Country of Origin: India

These plugs are run and set on Tubing or Drill Pipe. It also incorporates the seal element lock to allow faster, safer run-in.

Sledge Hammer Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required. These plugs are completely PDC drillable. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit.   Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.

Sledge Hammer Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required. These plugs are completely PDC drillable. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit. Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.

• Type: Cementing Plugs
• Material: Aluminium, Cast Nylon
• Shape: Cylindrical Round
• Application: Oil Drilling Industry, Oil Field
• Application: Oil Drilling
• Color: Black, Blue, Grey, Red, Yellow
• Feature: Chemical Resistance, Good Quality, High Pressure Bearing Capacity, Temperature Resistance
• Condition: New, Used

We are the main supplier of this product.

With advance notice, we can core any depth, drill at any angle as per the clients’ specifications, up to 30-inch diameters through brick or reinforced concrete. We are amongst the dependable Service Providers of Diamond Core Drilling from Faridabad (India). Our Diamond Core Drilling Services include coring anchor holes through reinforced concrete, openings for ventilation, stitch drilling for breaches, holes for service entries and core drilling in ceilings, walls & floors without hammering or vibration. We render the Diamond Core Drilling Services at reasonable Service Charge.Drilling Diameter : 12-500mm Drilling Depths : up to 2-3mm in concrete

SEW manufactures an ample range of Drilling Spools and Double Studded Adapter Flanges Adapter SpoolsAPI Spce 6A specified the overall length of 6BX Weld Neck Flanges as well as to achieve the length it provide the dimensions of specific portions of the flange, with tolerance, that are added together, along with an undefined weld bevel. According to customer requirement , SEW deliver the weld neck in stretched length. SEW manufactures Adapter Spools in a range of sizes and pressure rating. Adapter Spools have end connections that differ from one another in nominal size and /or pressure rating. Spacer Spools SEW Manufactures Spacer Spools opt for Well Head extension, B.O.P. Spacing, and Choke, Kill and Production Manifold applications. These are available in a number of sizes and pressure rating. Spacer Spools usually comprise the same nominal end connections. Its identification consists of naming each end connection and the overall length Drilling Spools SEW manufactures Drilling Spools in a wide range of sizes and pressure ratings.Drilling spools usually comprise the same nominal end/ outlet connections.As per the Customer’s requirement, products are available in  specified combination of end connections and outlet connections as well as overall height or length (OAL) and outlet extension. When specified minimum height (or length), SEW Adapter Spools, Drilling Spools and Spacer Spools have minimum overall height (or length) consistent with adequate clearance to accommodate studs, nuts, wrenches, and clamps where applicable.

Cementing Plugs, Cement Machinery, Centralizer, Float Shoe, Float Collar

We manufacture a complete line of downhole oilfield wiper plugs. Sizes range from 312 tubing plugs to 20casing plugs. We offer standard rubber covered plugs with aluminum cores and premium, PDC drillable, plugs molded from urethane. Our standard elastomer for our rubber plugs is SBR. We also offer Nitrile, HNBR and Fluorocarbon (FKM) for higher temperature applications and XNBR for higher wear resistance. These materials are available in both our top and bottom plugs. Our Urethane coverUrethane core plugs are rated to 250�° F while our SBR coverAluminum core plugs are rated to275�° F and our Nitrile coverAluminum core plugs are rated to 325�° F. All of our bottom plugs have rupture diaphragms rated at 125300 psi. Listed to the right are the plug casing size, casing weight and material from which the plugs are manufactured. RA is rubber cover and aluminum core. UU is urethane cover and urethane core. RU is rubber cover and urethane core.

• Country of Origin: Made in India
• Material: MS
• Model Name/Number: BJS-LM
• Spindle Bore: MAXIMUM 690mm
• Pipe Size Range: 160-315mm,200-400mm,250-520mm,315-630mm
• Main Motor for Cutter: 5.5KW or 7.5KW
• Flange Diameter Max: 1600 MM
• Phase Type: Three Phase
• Power Source: Electricity

• Material: MS
• Surface Finishing: Polished
• Inner Diameter: 3-6 mm
• Technique: Hot Rolled
• Tensile Strength: 370 Mpa

• Features: Sturdy construction, High operational fluency ,Less maintenance
• Item Code: HM-02

Our organization has a team of competent workers to make sure accurate quality control of products is done in order to ensure purchaser's quality demands are met. We believe in providing quality-approved products to the clients. For this, we make sure that all the inputs are procured from certified vendors after complete analysis of the quality. Features : Fully Automatic. Carbide/HSS Tooling for quality end facing and quick Tool change/settings . Three Tool System for OD, ID and Face chamfering simultaneously. CAM operated Facing Head Feed and Clamp for safety. De Dimpling of tubes along with facing. (Optional, if required).

Cementing Plugs, Solid Rigid Centralizer, Pressed Steel Couplers

hydraulic automatic drilling machine, centralised grinding machine

Boring Machines, Grinding Machines, milling Machines

material handling robot, factory automation, Instrumentation Panel

CNC Carbide Indexable Drill, Threading Tool Holder, Boring Bar Tools

drilling machinery, Lathe Machine, computer numeric control machinery

spindle drilling machine, Lever, Lathe Machine, Traub Machine

Drilling Machine, Air Coolers, offshore drilling, fhp coolers

Tube End Facer, ERW Tube Mills

Pedestal Drill Machine

Conveyor, Painting, Wall Murals, Handicrafts, fabric painting

tubewell boring machine

Oil Drilling Equipment, Oil Exploration Equipment Spare Parts

Drilling Machine, CNC Machine, Double Column Vertical Lathe Machine

Drilling Machine, Cutting Tools, dowel pin circlip, Chains, Nut Bolts

Spm Machine, Laser Marking, Laser Engraving, pneumatic fixtures

Trepanning Tools, Groove Mill Cutter, burnishing drills, carbide pins

Jigs, Hydraulic Equipment