False Ceiling Services in Faridabad

• Material: Plywood
• Service Type: False Ceiling Service
• Service Mode: Offline
• Payment Mode: Online and Offline
• Location: Haryana

We are offering Metal Aluminium False Ceiling Installation Services to our valuable clients across Faridabad(Haryana). We ensure that the ceiling is made from fine quality metal or aluminium. In addition, we make sure that the fabrication process is conducted under the supervision of professionals. The aluminium ceilings, we fabricate, are rust resistant and have a fine finishing. Mainly, offices, commercial complexes, theatres or malls require aluminium fabrication in their space. You can consult with us for any type of aluminium false ceiling fabrication solutions.

We are a trustworthy False Ceiling Work Service Provider from Haryana (India). We are capable of fixing False Ceiling at all heights. Our False Ceiling Work includes providing and fixing of frame work made of special sections, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre. One flange is fixed to the ceiling with dash fastener 12.5 mm diameter x 50mm length with 6mm diameter bolts and other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size. Other end of angle hanger is fixed with intermediate GI channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre to which the ceiling section 0.5 mm thick and bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips. These connecting clips are made out of 2.64 mm diameter x 230 mm long GI wire at every junction, including fixing perimeter channels 0.5 mm thick, 27 mm high having flanges of 20 mm and 30 mm long. The perimeter of ceiling is fixed to wall/partition with the help of raw plugs at 450 mm centre, with 25mm long dry wall screws at 230 mm interval. We also fix gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers. This finishing covers up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification, and also includes the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the engineer.   Types of  False Ceiling Gypsum Ceiling T-Grid Ceiling P.O.P Ceiling PVC Panel Ceiling Hilux tile Ceiling Metal tile Ceiling

false ceiling designers