Filling Line Dealers in Sector 31, Faridabad

We offer an extensive range of water-cooled chilling plant with high quality compressors. Water-cooled chillers incorporate the use of cooling towers which improve the chillers' thermodynamic effectiveness. Water-cooled chillers are typically intended for indoor installation and operation, and are cooled by a separate condenser water loop and connected to outdoor cooling towers to expel heat to the atmosphere. Description water cooled chilling plant is being manufactured from 3 tr to 250 tr capacity in compact design covering minimum floor area. Our water cooled chilling plants have different features details as below: compressor we are using reciprocating scroll semi hermatic compressor of reputed make. Condenser compact design shell and tube type. Low pressure, high pressure cutout are being provided for the safety of plant. Thermostat being also provided for electronics automatic tripping when temperature get maintained. Chiller condensed liquid refrigerant is being expanded in dx type chiller through expansion valve. Water is being circulated through chiller shell side having baffles arrangement, chiller is also being manufactured and tested hydrostatically at 20 kgcm² pressure.

The organization is supported by systematized packaging system which assists us in meeting the specific packaging requirements of the clients with ease. Also, we ensure zero damage to the products. We source the raw material from the trusted places in the market. As a result of which, the finished products stand high on the expectations of the clients.

• Features: Rich in taste

• Material: Aluminum and stainless steel
• Type: Vaporizer
• Features: High efficiency, Low maintenance, Cost-effective
• Power source: Electric

• Weight: 700Kg
• Power: 5 H.P
• Automation Grade: Automatic
• Packaging Speed: 700 Pack Per Minute

• 1. Sealing Type: Center Sealing
• 2. Vertical Sealer: Servo Driven
• 3. Paper Pulling: Servo Driven Draw Down Belts
• 4. Output: Up to 80 bags/min( Depend on the product bulk Density & Flow Nature )
• 5. Power Consumption: 5 kW/h
• 6. Compressed Air: 2.5 cu.m/h @ 7 bars
• 7. Web Holding: Through pneumatic mandrel
• 8. Web Guide: Electronic
• 9. Interface: Touch screen
• 10. Control Type: Motion Controller
• 11.Product Clogging: Detection & Automatic Dechoker
• 12. Discharge Unit: By Parabolic Discharge Chute
• 13. Contact Part: S.S. 304

• Material: SHOT, GRIT, COPPER SLAG ETC.  
• Warranty: 6 MONTH
• Automation Grade: Automatic
• Material To Be Casted: Copper, Zinc, Aluminium
• Design: Standard 
• Capacity: 200 KG 
• Air Requirement: YES 
• Volume: 200
• Sand: YES
• Pressure: YES 
• Blast Hose: YES
• Number Of Wheel: 2 WHEELS 
• Nozzle Type: BORON CARBIDE 
• Recommended Abrasive Size Range Bs Mesh: 0.2 TO 3MM
• Blast House Length: DEPEND ON BUYER WORK
• Is It Portable: Portable
• Available Units: 10 UNIT 
• I Deal In: New and Second Hand
• Air Compressor: APPLICABLE 

The company is a prominent Manufacturer and Supplier of Sewage Treatment Plant in the market. Offered in a turnkey basis, our Sewage Treatment Plant treats sewage water produced by residential colonies, canteens, restaurants, etc. The process of treating involves collection, primary treatment, biological treatment and tertiary treatment to make the water recyclable. We fabricate our Sewage Treatment Plant according to the proven extended aeration technology that is either based on suspended growth or attached growth as in the case of Fluidized Aerobic Bioreactor and Submerged Aerobic Fixed Film reactor. Basically, Sewage treatment Plant or Domestic Wastewater Treatment, is the process of removing contaminants from wastewater and household sewage, both runoff (effluents) and domestic. Discharges from treatment plants usually are disposed by dilution in rivers, lakes, or estuaries. They also may be used for certain types of irrigation, transported to lagoons where they are evaporated, or discharged through submarine (underwater) outfalls into the ocean. However, outflows from treatment works must meet effluent standards set by the Environmental Protection Agency to avoid polluting the bodies of water that receive them. The features of wastewater treatment systems are determined by The nature of the municipal and industrial wastes that are conveyed to them by sewersThe amount of treatment required to preserve and/or improve the quality of the receiving bodies of water. Details Sewage Treatment Plant is characterized as system based on usage of Oxygen / Air in Secondary Treatment Stage (Biological Decomposition of organic matter) Aerobic STP Oxygen/Air is continuously supplied to the Biological (Aeration) Reactor either by direct Surface Aeration system using Impellers propelled by Pumps or Submerged Diffused Aeration system using Air Root Blowers for Air supply through diffusers. Aerobic condition leads to complete oxidation of Organic Matter to Carbon Dioxide, Water, Nitrogen, etc. thus eliminating Odor problem caused due to incomplete oxidation. Also Air supply aids in uniform and efficient mixing inside the tank.Anaerobic STP Here sewage partially decomposed in closed Biological Reactor in absence of Air which leads to reduction of Organic Matter into Methane, Hydrogen Sulfide, Carbon Dioxide, etc. The plant is widely used to treat wastewater sludge and organic waste because it provides volume and mass reduction of the input material to a large extent.

• Weight: 750 kg
• Power Consumption: 1.5 kW/hr
• Output: - 70 pouches/min subject to density
• Reel Width: - 80 300 mm
• Compressed Air: - 1.5 cu m/hr @ 4 bar
• Sachet Width: - 15 100 mm
• Sachet Length: - 50 -350 mm

• Brand Name: United Packaging Machines
• Machine Type: Automatic
• Contact Parts Material: SS 316
• Batch Cutter Operation: Pneumatic
• Power Consumption: 10- 12 KW
• Motor: 2.2 KW
• Length: 1500 mm
• Width: 2000 mm
• Height: 2800 mm
• Net Weight: 1600 Kg
• Gross Weight: 1900 Kg
• Air Compressor: 2 CFM @ 6 Bar
• Filling Capacity: 1ml-250ml
• Scrap Rate: Less Than 1 Percent
• Temperature Controller: PID Based
• Control Panel Type: Air Cooled With All Applicable Standards
• Sealing Style: 4 Side Seal
• Speed: 40-50 Strokes/Minutes
• Roll Width: 600 mm
• Roll Diameter: 450 mm
• Reel Core Inner Diameter: 76 mm
• Max. Length of Pouch: 160 mm
• Packing Material: Laminate With One Side Heat Sealable
• Products To Be Packed: Liquid/Paste With disabled Viscosity Range
• Sealing Drives: Mechanical-Cam Driven
• Filling Mechanism: Piston Filler/ Solenoid Valve
• Sealing Type: Plain/ Line/ Serration
• Perforation And Cutting: Zig Zag Perforation
• Laminate Roll Unwind: Through Dancing Roller/ Pneumatic Brake
• Laminate Draw off System: Through Clutch Brake/ Servo Driven

• Automatic Grade: Automatic
• Voltage: 415 V
• Weight: 500 kg
• Driven Type: Electric
• Frequency: 50 Hz
• Phase: Three Phase

• Voltage: 230 V
• Weight: 1000 kg
• Machine Type: Semi-Automatic
• Power Source: Electric
• Packaging Material: Plastic
• Phase: Three Phase 

We are the leading manufacturers, exporters and supplier of this products.

• Material: Ms ,ss
• Finishing: Chrome Finish
• Driven Type: Mechanical
• Color: Grey
• Condition: New
• Power: 3-6 Kw
• Pressure: Low Pressure
• Power Supply: 3- phase
• Operating Type: Semi Automatic
• Usage: Biscuit Wrapping
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Type: Flow Wrapping
• Phase: Three Phase
• Warranty: 1 Year
• Country of Origin: India
• Corrosion Resistance: Yes
• Machine Structure: Horizontal

We are leading supplier of RO Water Plants

LPG Station, Auto LPG Tank, Lpg fuel tank

Manifolds Fitting, Barrel Grease Pump, Rotary Pumps

Water Treatment Plant, Waste Water Treatment Plant, Water Sewage Plant

Packaging Machine

Adhesives, Industrial Chemicals, Insulating Varnishes, epoxies, Resins

drinking water plants, Water treatment systems, purification systems

Tea, Organic foods, Spices, Natural Herbs, Coffee, Fruits

Rinsing Filling Capping Machine, cooling tunnel machine

Solar Light, Solar Power System, Solar Heater, Solar Air Conditioners

Water Treatment Plants, water vending system, Reverse Osmosis Plants

Adhesives, Epoxy Flooring, Floor Hardeners, concrete repair, Floor Hardener