Filling Line Dealers in Sector 5, Faridabad

DISTINCT FEATURES Provision for Two Rolls on unwind Sealers are both end supported End roll detection synchronized with PLC & Filling Provision for batch cutting & counting Temperature Control and Heater Failure Indication is through PLC hence, eliminating the need for temperature controller Paper break detection sensor Joint detection sensor (optional) Hopper level controller

• Machine Motor: 1/2 Hp, single phase, 50 Hz
• Heater Load: 150 w x 2 Nos; 300 w x 2 Nos
• Machine Weight: 300 kg approx

Best for Namkeen & Powder Products. The fully automatic Form Fill & Sealing Machine is an intermittent machine designed for the efficient packing of product in seal pouch upto 500 gms. Ease of operation & Maintenance. The Machine is versatile & can be easily changed over from one pouch size to another. Horizontal Sealer is driven by pneumatic cylinders. Vertical seal is done by rotating die rollers through clutch & brakes.

• Sealing Style: 4 Side Seal
• Speed: 70 Strokes / minute maximum (Depends upon the type of product & quantity to be filled)
• No. of Tracks: Depends upon the width of the pouch
• Laminate Specification: Width - 1000 mm max. Roll Dia - 600mm. max. Reel Core I.D.- 150/76 mm
• Packing Material: Laminates with one side heat sealable
• Filling Capacity: 1ml-300ml
• Product To Be Packed: Liquid / Paste within a dosable viscosity range
• Sealing Drives: Vertical – Servo Driven Horizontal – Servo Driven
• Filling Mechanism: Piston Filler
• Perforation and Cutting: As per customer requirement
• Laminate Roll Unwind: Motor driven – Bonfiglioli Geared Motor.
• Laminate Draw Off System: PLC based Servo Driven
• Control: Through Touch Screen Panel (HMI)
• Laminate Tracking System: E+L web aligner – Digital.
• Main Control Panel: Air cooled panel – BCH make or Rittal
• Contact Parts: SS 316 L
• Indirect Contact Parts: SS 304 / 316
• Batch Cutting: Can be programmed through PLC
• Mat Format: In built feature of the Machine.
• Electrical Spec.: Main Motor – 2.2 KW, 3 Phase, 415 V Connected load – 14 Kw. Consumption – 11 Kw. PLC controlled Operations RTD module with PLC for Temperature controllers
• Layout Dimensions: Length -3200 mm
•  : Width - 2600 mm
•  : Height - 2100 mm
• Machine Weight: Net Weight - 3500 kgs. Gross weight - 4000 kgs.
• Compressed Air: Operating Pressure – 5 Bar.
•  : Consumption – 3 CFM.
• Pneumatics: FESTO or equivalent.
• Machine Efficiency: 90%*
• Scrap Rate: Less than 2%*
• Machine Colour: Shell Grey – Powder coated.
• Weight Variation: Within +/- 1%** of the filled quantity

We are offering fully automatic jat filling machine with foil seal attachment to pack liquids(like ghee), powders and granules.

• Application: For Packing Solid Products, Rice, Tobacco, Tablets, Panmasala, Jaljira, Cereals, Coffee, Tea, Detergents, Pharmaceutical Powder, Namkeen, Heena etc.
• Speed (Bag/min.): 15 – 60.
• Max. Weight/Bag: Up to 2Kg.
• Pack Size: Roll : 90 – 450mm.,Pouch Length : 100 – 500mm.
• Film Type: Multi layer Laminate.
• Web Size: 200 – 470mm, Core Dia: 75mm, Max Outer Dia: 350mm.
• Sealing System: Type – Continuous Heat Pillow Type/Gusset.
• Filling System: Electronic Weigh Filler Volumetric Cup Filling, Auger Filter.
• Power Consumption: 2.5Kw, 220V/Single Phase (Optional).
• Weight kg(gross): 600
• Dimension: 150 x 1200 x 2600mm.
• Air: 6 – 8 ,4 – 6 Bar Pressure.
• Products to Pack: Namkeen, Tea, Coffee, Spices etc.

• After-Sales Service Provided: Engineers available to service machinery overseas
• Usage: Snack Foods,Liquid, nuts
• Brand Name: Weighlin
• Certification: CE
• Condition: New
• Automatic Grade: Automatic
• Type: Other
• Weight: 500Kg
• Building Material: SUS304 Stainless Steel
• Control System: 7" User's Touch Screen
• Supply Ability: 1 Set/Sets per Month
• Station: 1 of Working Station
• Pouch Length: 120 - 350mm
• Packing Speed: 10 - 15bags
• Pouch Width: 120 - 300mm
• Application: Food, Beverage, Commodity, Medical
• Packaging Details: - Fumigation Certificated of Wood Packaging for Oversea Shipment - Inner Plastic Film Wrapping Protect the Goods from Salting, Wind or Damage - Shipping terms EXWORK, FOB, C&F, CIF terms by Sea-shipment or Air-Shipment
• Driven System: Pnematical Driven
• Port: Zhongshan or Guangzhou

• Type: Automatic
• Material: Stainless Steel
• Certification: CE Certified
• Voltage: 380V
• Phase: Single Phase
• Warranty: 1 Year

• Type: Sand Blasting Machine
• Weight: 100-1000kg
• Color: Natural
• Voltage: 110V
• Application: Sand Blasting
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

Being an established brand in the industry we are offering Sand Blasting Machine to our valued clients. The product we offer is excellent in quality, as it is manufactured by using the excellent quality materials along with the latest technology. The product is designed for precision and excellence by our experienced team of professionals.  Our product is highly demanded, as it is used for various applications like cleaning of molds, putting grains on the molds, preparing the surface for painting, coating, and much more. We are offering this machine at a very marketable rate.   Portable Abrasive Blaster The portable abrasive blaster are safe, high productivity systems designed for use with a wide range of abrasive media. The operation is performed on metals, glass, ceramics, plastic and stone. The machine works on pressure blasting principle, consist of a blast generator. The abrasives are filled at the top of machine when machine is not working and blast generator is not pressurized. At the top, a vibrating sieve is provided to sieve the abrasive filled. The oversize abrasive and debris are retained on the screen, thus prevent the choking of blast line. When mushroom valve is opened the abrasive will get transferred to blast generator for blasting. The mushroom valve gets closed when compressed air is switched on and abrasive storage tank gets pressurized, for free fall of abrasive into the mixing tube. From mixing tube the abrasive is carried away by compressed air to the nozzle for blasting. The Blast Generator is fabricated from MS Steel plate of thickness not less than 6 mm as per IS-2825 and hydraulically tested for 250 psi.

• Automatic Grade: Manual
• Power: 1-3kw
• Application: Filling

Pick ,fill and  Sealing Machine with weight filler for filling & sealing of preformed pouches of snack foods , dry fruits, Seeds, Chips, Mixtures etc. The machine works automatically in picking, filling and sealing of pouches. It offers flexibility of using pouches in different forms such as stand-up pouches, pouches with spouts, zippers and many more.

• Country of Origin: India
• Type: Automatic Collar Type Machine
• Certification: ISO 9001:2008
• Weight: 4000-6000kg

Salient Features Fully automatic collar type form fill & seal machine is an intermittent system Has tendency to pack various products vis-à-vis rice, flour, sugar, tea, coffee, chips etc. The base machine can handle automatic weigh filters as well as auger fillers Can handle all kinds of laminated films vis-à-vis polyester / BOPP / Polyethylene / Al-foil etc. If required virgin films can be entertained on impulse heat sealing system. Contact parts in stainless steel.

• Country of Origin: India
• Type: Sewage Treatment Plant
• Certification: ISO 9001:2008
• Automatic Grade: Semi Automatic

Sewage treatment plant Water treatment plant Oil and grease trep Effluent treatment plant Air pollution control plant

We are a renowned Exporter and Supplier of Milk Packaging Machine in the global market. This array of Milk Packaging Machine includes Semi Pneumatic Auger Based Filling Machines, Collar Type Filling Machines and Semi Pneumatic Cup Filler. The Milk Packaging Machine, which we offer, is widely used in Milk Processing Sector for the purpose of packing free flow milk in pouches. This Milk Packaging Machine is mainly used to pack pouches of length 120 -240 mm and width 160 - 320 mm. Our Milk Packaging Machine is durable and has fine finish.

We are offering powder filling machine. Rollatainers offer fully automatic servo driven pouch packing machine to fill powder in pouches like spices, milk powder, detergent powder, pharma powder etc.

• Application: ALL TYPES
• Material: Stainless Steel
• Machine Type: Manual
• Filling System: Fully Automatic

• Weight: 600 kg (Approx.)
• Pouch Dimensions: 50mm to 200mm, 65mm to 300mm
• Machine Dimension: L: 1800mm, W: 100mm, H: 1360mm (Approx.)

Candy, Chewing gum, Chocolates. Packing Material: Heat Sealable Laminated Films, Type of seal: Center Seal Pouch, Pouch Dimensions: Width : 50mm to 200mm, Height: 65mm to 300mm. Electrical Supply: 230V A.C. Single phase 50 Hz. Power Consumption: 2.5Kw, Single phase. Production Out Put: 300-450 per minute (Depend upon size of product). Weight: 600 kg (Approx.). Machine Dimension: L: 1800mm, W: 100mm, H: 1360mm (Approx.).

The Sewage Treatment Plant offered by us is the best example of the latest development of technology. The Industrial Sewage Treatment is manufactured strictly adhering to the international guidelines so that it ensures total freedom from pollution. The Sewage Treatment Plant is available in different capacities to meet the specific requirements of the industry. We are among the prominent Manufacturers of Sewage Treatment Plant in India whose products are widely accepted in industries. The Sewage Water Treatment Plant is fit for all kinds of biological and chemical treatments. Treatment Techniques The basic technology generally used for the treatment of Sewage is activated sludge process. This applies to both small and large processing plants and the difference lies in the arrangement and enhancement of the various sections of the process. The activated sludge process is a natural process and nature offers us a unique solution to treat sewage. Nature has provided a special balance in this process in that the micro organisms present when the food levels are high, will also consume the largest amount. This allows the quick breakdown of the BOD levels to more reasonable levels. Once these levels are reached, other microorganisms, which are heavier and less mobile, will reduce the BOD levels further, until the final acceptable standards are obtained The fact that the last organisms are large and heavy, allows us in practical terms to settle these organisms out very efficiently, producing a clear liquor. To balance the process, we can identify four major sections in a activated sewage plant system: Collection and anaerobic storage Aeration of the Sludge Setting of the sludge removing all solids Chlorination and phosphor removal to bring the final effluent up to the required standard Biological Treatment Biological treatment is the process of utilizing naturally occurring living organisms to degrade, stabilize and destroy organic contaminants. These microorganisms use the waste as their source of energy and carbon. Biological treatment technologies are restricted to organic wastes, and therefore have limited application. It is appropriate at this point to review some principles of biological process. All living organisms require a source of energy and carbon to be able to develop and reproduce. Many organisms (autographic) get their carbon from inorganic compounds (such as CO2), while other organisms (heterotrophic) use organic compounds to get their carbon. Aerobic and anaerobic metabolic pathways are used by microorganisms to degrade organic waste. During aerobic respiration, the organism utilizes oxygen to break down complex organic compounds into simple in organic salts, carbon dioxide and water. These microorganisms require an electron acceptor (oxygen in the case of aerobic), nutrients such as nitrogen (N) and phosphorous (P), and other trace elements. One of the most important characteristics of the waste is its biodegradability. Microorganisms can either directly use the contaminated waste and gain energy and carbon from it; or, with the help of another substance they can co-metabolically break down the contaminated waste. The biodegradability of a waste can be measured in the laboratory through BOD (5) / COD tests. BOD (biological oxygen demand) is a test through which contaminants can be categorized according to their biodegradability. COD (chemical oxygen demand) is a measure of the oxygen required to oxidize all compounds in water, both organic and inorganic. Chemical Treatment The technologies described in this section are chemical treatment technologies that are used for the cleanup of uncontrolled hazardous waste sites. In general, chemical treatments alter the structure of the waste constitutions to render them less hazardous than their original form. The objectives in using chemicals and chemical reaction are to either immobilize, mobilize for extraction, or detoxify the contaminants. A chemical technology may achieve one or all of the above tasks. Before describing any of the treatments in detail, a few points must be emphasized. The feasibility of chemical treatment is dependent on site and waste characteristics. Therefore, a careful study of site hydrology and geology must be performed before choosing teleology. Many chemical treatments involve delivery of a fluid to the subsurface. Care must be taken to avoid the migration of treatment reagents since they can be toxic themselves. Chemical treatment can be applied to both organic and inorganic wastes. However, a detailed study of the waste must be done, so that the wrong reagents are not mixed with the waster resulting in increased toxicity. Sequential Batch Reactor The Sequential Batch Reactor combines. The efficiency of activated sludge aeration with batch. Treatment to provide exceptional efficient quality even. Under extreme loadings. Benefits And Features Reduces main pollutants including ammonia by 95% Reduces phosphates by 99% Batching system eliminates peak surges Fully recyclable All components easily accessible The SBR uses an aeration process known as activated sludge but operates on a storage and batch treatment cycle Which ensures full treatment of all the effluent � even under pack flow conditions. Crucle sewage enters the primary Settlement Tank where gross solids settle out and the supernatant liquor. remaining near the surface can be drawn off. Substantial buffer storage volume is provided to cope with even the most extreme peak flow loadings and aerated by a powerful air bubble diffusers for a period of 4 to 6 hours. During this aeration cycle efficient Oxygen transfer cultures of bacteria (the active sludge) which feeds on the sewage liquor thereby removing most of the organic pollutants. After carnation, the bubble diffuser is switched off and three is a setting period of two hours during which the dense activated sludge sinks to the bottom leaving behind the clarified effluent, which is then discharged in to the drain. The SBR is an advanced biological aeration type treatment plant designed to produce a very high quality of final effluent in addition to overcoming several of the common problems Common problems, which normally occur, in other treatment plants are : Peak surges flow (i.e. Mornings and evenings) can force effluent through the Plant before it has had sufficient treatment time. Fixed film, types, which have a media matrix, can suffer from media blockage because of excessive bacteria growth. Replacement / maintenance of the media material may be required at regular intervals. Mechanical / electrical components within the tanks are difficult to maintain and can be a safety risk. The liquor is not spread evenly over the available bacteria preventing an adequate Oxygen supply.

• Packaging Type: Wooden Box
• Pressure: Low Pressure
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Type: Cosmetic Packaging Machine
• Material: Mild Steel
• Condition: New
• Automatic Grade: Semi automatic, Automatic
• Driven Type: Electric

We are successfully ranked amongst the top traders and suppliers of Pyramid Tea Bag Packing Machine

Single Phase Power Load :  5KW Motor :  Servo Auger S Screw & Pipe Power Supplied : 220V/50Hz, 110V/60Hz

• Weight: 700 kgs.
• size (mm): L : 40-300, W : 20-125, H : 5-56
• Dimension: 3600 (L) x 1500(W) 2000(H)

The horizontal pillow wrapping machines can wrap all kind of commodities such as Biscuits, Candies, Wafers, Chocolate, Bars, Chewing gums, Soaps, Instant Noodles, Dry cells, Facial paper, Crackers and any other rectangular, square, round or irregular shaped products. Suitability to pack variety of solid Shapes & Material. Capacity to pack variety of sizes with high speed & safety. Pouch cut-off length can be calibrated by hand wheel. All contact parts are made of stainless steel. With design registration system.

• Material: Woven Sack & Non-Woven Bags
• Dimension (Approx): 6000 x 10000 x 1800 mm
• Max Speed: 20 - 25 pcs / min.

FAIRPRINT Automatic Rice Bag Stitching Machine is a Breakthru' Innovative Design to deliver Latent needs of Global Consumers for mass production efficiently at very competitive running cost. FAIRPRINT 'an ideal for best quality jobs' is highly productive for Rice Bag Stitching for Woven-Sack & Non-Woven Fabric.Huge range of Bag Stitching Machine can make bags with Bottom Stitching for Side Gusset Woven-Sack bags & L-Shape stitching for Non-Woven Rice bags.

  Cup Filler Machine is used to pack granular and powder items by volume. This machine has volumetric cups in which the material is filled from the top hopper. The volume of the cup is adjusted in a manner by the adjusting nut that the volume of the material in the cup can be adjusted and the final desired weight of material can be achieved. As this is a volumetric cup filler the end accuracy in net weight depends on the consistency in bulk density of the material being packed. The volume of the cups can be maintained consistently by a rigid construction of the disc of the cup filling machine, however if the bulk density of the material is varying then the net weight also varies. Another very important aspect of this machine is the flow characteristic of the material being packed. If the material does not have good flow characteristics then it poses two problems either the volumetric cups do not get filled completely or they may not get emptied completely, in both the cases there is a variation in the net weight of the pouch.It is ideal to use a cup filler where the weight variation is not a very high concern specially in products which are relatively cheap, also where the product has a good flow characteristic and high production speeds are required with a lower equipment cost. Cup filler machine is also easy to setup and involves more of mechanical parts and is easy to maintain. Our machine comes with double motors one for the rotation of disc and the other for the pulling of the laminate is recommended for a better control as both these motors have independent drives and sensors for motion they can be easily setup. The horizontal and vertical sealing are both done pneumatically. This ensures that the sealing is done properly and the temperature control is by PDI temperature controllers. Having a consistent temperature for sealing is critical to the quality of seal which ultimately affects the shelf life of the pouch.  The machine comes with a camera for sensing the location of the eye mark. The batch coder prints the date code, mrp, lot code at the relevant location on the pouch.

• Machine Type: Hot Chamber
• Brand Name: MGI
• Cleaning Type: Surface Cleaning
• Automation Grade: Automatic
• Max Casting Area: 0-50 cm
• Die Locking Force: 10-20 ton
• Cleaning Process: Alkaline Cleaning
• Is It Portable: Portable

• Voltage: 320 - 440 V
• Material: Mild Steel
• Usage/Application: Sand Blasting
• Automation Grade: Automatic
• Frequency: 50 - 60 Hz
• Cabinet Length: 600 mm
• Cabinet Width: 500 mm
• Cabinet Height: 520 mm
• Work Pressure: 7 Bar

etp plant, Stp Plant, Industrial RO system

eps filling gun, Fully Automatic EPS Shape Moulding Machine