Filling Line Dealers in Sector 6, Faridabad

  Cup Filler Machine is used to pack granular and powder items by volume. This machine has volumetric cups in which the material is filled from the top hopper. The volume of the cup is adjusted in a manner by the adjusting nut that the volume of the material in the cup can be adjusted and the final desired weight of material can be achieved. As this is a volumetric cup filler the end accuracy in net weight depends on the consistency in bulk density of the material being packed. The volume of the cups can be maintained consistently by a rigid construction of the disc of the cup filling machine, however if the bulk density of the material is varying then the net weight also varies. Another very important aspect of this machine is the flow characteristic of the material being packed. If the material does not have good flow characteristics then it poses two problems either the volumetric cups do not get filled completely or they may not get emptied completely, in both the cases there is a variation in the net weight of the pouch.It is ideal to use a cup filler where the weight variation is not a very high concern specially in products which are relatively cheap, also where the product has a good flow characteristic and high production speeds are required with a lower equipment cost. Cup filler machine is also easy to setup and involves more of mechanical parts and is easy to maintain. Our machine comes with double motors one for the rotation of disc and the other for the pulling of the laminate is recommended for a better control as both these motors have independent drives and sensors for motion they can be easily setup. The horizontal and vertical sealing are both done pneumatically. This ensures that the sealing is done properly and the temperature control is by PDI temperature controllers. Having a consistent temperature for sealing is critical to the quality of seal which ultimately affects the shelf life of the pouch.  The machine comes with a camera for sensing the location of the eye mark. The batch coder prints the date code, mrp, lot code at the relevant location on the pouch.

• Power: 1/2 & 1/4H.P. 220VSingle Phase 50 – 60 Hz Heater : 150W – 2Pc,200W – 2Pc, 300W – 2Pc,500W – 2 Pc.
• Application: For Packing tea,spices, Namkeen,mouth fresheners etc.
• Speed (Bag/min.): 20 – 40.
• Filling Cap.Gms: 10 – 50gms/50-100gms/100-250gms.
• Bag Size mm: (RW) 60 – 350,(L) 40 – 200.
• Seal Style: Pillow type/side seal
• Measuring Method: Volumetric dosage plates, auger filler,Conveyor
• Laminate Structure: Polyester/ Met/ Al Laminated Foil, Heat seal able plain, Pearliest BOPP & any Heat Seal able Film Core Dia: 75 mm Max Outer Dia : 350mm.
• Weight Kg (gross): 450.
• Dimension: 925 x 700 x 1600.
• Products to Pack:: free flowing granular products.

• Type: Automatic
• Certification: CE Certified
• Application: Packing Pillow
• Weight: 100-1000kg
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year

• Weight: (50-60)kg
• Driven Type: Electric
• Packaging Type: Pouch
• Type: Filling Machine, Extruder Machine
• Power: 20HP
• Packaging Details: wooden box Machine
• Dimension(L*W*H): 1800*1000*1500mm aprx
• After-sales Service Provided: Engineers available to service machinery overseas
• Supply Ability: 25 Unit/Units per Month
• Port: DELHI
• Packaging Material: Paper, Plastic
• Model Number: KKEM
• Application: Food

DISTINCT FEATURES Provision for Two Rolls on unwind Sealers are both end supported End roll detection synchronized with PLC & Filling Provision for batch cutting & counting Temperature Control and Heater Failure Indication is through PLC hence, eliminating the need for temperature controller Paper break detection sensor Joint detection sensor (optional) Hopper level controller

• Automatic Grade: Manual
• Power: 1-3kw
• Application: Filling

Pick ,fill and  Sealing Machine with weight filler for filling & sealing of preformed pouches of snack foods , dry fruits, Seeds, Chips, Mixtures etc. The machine works automatically in picking, filling and sealing of pouches. It offers flexibility of using pouches in different forms such as stand-up pouches, pouches with spouts, zippers and many more.

• Type: Sand Blasting Machine
• Weight: 100-1000kg
• Color: Natural
• Voltage: 110V
• Application: Sand Blasting
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

Being an established brand in the industry we are offering Sand Blasting Machine to our valued clients. The product we offer is excellent in quality, as it is manufactured by using the excellent quality materials along with the latest technology. The product is designed for precision and excellence by our experienced team of professionals.  Our product is highly demanded, as it is used for various applications like cleaning of molds, putting grains on the molds, preparing the surface for painting, coating, and much more. We are offering this machine at a very marketable rate.   Portable Abrasive Blaster The portable abrasive blaster are safe, high productivity systems designed for use with a wide range of abrasive media. The operation is performed on metals, glass, ceramics, plastic and stone. The machine works on pressure blasting principle, consist of a blast generator. The abrasives are filled at the top of machine when machine is not working and blast generator is not pressurized. At the top, a vibrating sieve is provided to sieve the abrasive filled. The oversize abrasive and debris are retained on the screen, thus prevent the choking of blast line. When mushroom valve is opened the abrasive will get transferred to blast generator for blasting. The mushroom valve gets closed when compressed air is switched on and abrasive storage tank gets pressurized, for free fall of abrasive into the mixing tube. From mixing tube the abrasive is carried away by compressed air to the nozzle for blasting. The Blast Generator is fabricated from MS Steel plate of thickness not less than 6 mm as per IS-2825 and hydraulically tested for 250 psi.

• Sealing Style: 4 Side Seal
• Speed: 70 Strokes / minute maximum (Depends upon the type of product & quantity to be filled)
• No. of Tracks: Depends upon the width of the pouch
• Laminate Specification: Width - 1000 mm max. Roll Dia - 600mm. max. Reel Core I.D.- 150/76 mm
• Packing Material: Laminates with one side heat sealable
• Filling Capacity: 1gm-300gm
• Product To Be Packed: Any type of free flowing powder
• Sealing Drives: Mechanical – Cam driven with individual sealing jaw setting
• Filling Mechanism: Slide Filler
• Perforation and Cutting: As per customer requirement
• Laminate Roll Unwind: Motor driven – Bonfiglioli Geared Motor.
• Laminate Draw Off System: PLC based Servo Driven
• Control: Through Touch Screen Panel (HMI)
• Laminate Tracking System: E+L web aligner – Digital.
• Main Control Panel: Air cooled panel – BCH make or Rittal
• Contact Parts: SS 316 L
• Indirect Contact Parts: SS 304 / 316
• Batch Cutting: Can be programmed through PLC
• Mat Format: In built feature of the Machine.

We are regarded as the most trusted Exporter and Supplier of the finest range of Bagging Machines. Our Bagging Machine range includes Semi Pneumatic Auger Based Filling Machines, Semi Pneumatic Cup Filler and Collar Type Filling Machines. The Bagging Machine, which we provide, is procured from reliable Manufacturers and Vendors; these Vendors manufacture this machinery by using the latest technology and adhering to the international quality standards and guidelines. Bagging Machine is used for the purpose of packing different kind of products. These Bagging Machines are widely appreciated for their robust construction, flawless performance and easy operation. The machine gets approved and stamped by Department of Legal Metrology before the final dispatch.   Specifications : Packing Capacity : 300 Bags Per Hour for 25 kg bags Weighing accuracy : 50 g   Machine will be complete in all respects, factory assembled and ready for installation under your hopper. Machine will include : Filling assembly (Gravity Feeder for coarse, medium and fine feeding) with single flap valves mounted on structure. Net-weigher (Weigh Hopper) with discharge flap Dumper Hopper with pneumatically operated bag clamps Load cell of 110 kg capacity Electronic Weighing system including microprocessor computer controller Pneumatic arrangements including the filter regulator lubricator All contact parts shall be fabricated in mild steel   Koyka Automatic Packing Machine with single spout for weighing and filling in standard open mouth bags : Model : GF 02E Packing Capacity : 600 Bags Per Hour for 5 kg bags Weighing accuracy : 50 g Features : Double Thread Heavy duty Bag Closing Machine complete with sewer head mounted on a tubular pedestal column with hand wheel and rack & pinion arrangement for height adjustment with 0.5 hp motor Slat Conveyor 4000 long and 350 mm wide with 1 hp geared drive Control Panel Double action foot switch Dual thread cone mount Heavy duty base Hand operated centralized lubrication unit

We are offering pesticides stick packing machine. Rollatainers-toyo machine japan - offer fully automatic, most accurate, stick packing machine to fill pesticides products in sticks.

• Voltage: 320 - 440 V
• Material: Mild Steel
• Usage/Application: Sand Blasting
• Automation Grade: Automatic
• Frequency: 50 - 60 Hz
• Cabinet Length: 600 mm
• Cabinet Width: 500 mm
• Cabinet Height: 520 mm
• Work Pressure: 7 Bar

We are one of the well established supplying a wide range of Form Fill & Seal Machine

We specialize in manufacturing weigh filler packaging machinery for various kinds of applications.

Since time immemorial, spices have played the role as food as well as medicine. Spices bring out the unique natural taste of cuisines, are used to change the look of the food and make it look attractive. In other words, they are regarded as food enhancers as they are used to give a strong taste and an aromatic scent in cuisines. This taste, aroma and freshness are only possible when the spices are packed hygienically keeping the quality factors in mind. Flexo Pack offers a range of spices packing machine which is fabricated using quality parts to make sure they are dimensionally accurate, durable and made of corrosive resistant material. The best part is that they are offered at a transparent deal and the first preference among clients. This is because the machine has a sturdy body, highly efficient and easy-to-use.

The Sewage Treatment Plant offered by us is the best example of the latest development of technology. The Industrial Sewage Treatment is manufactured strictly adhering to the international guidelines so that it ensures total freedom from pollution. The Sewage Treatment Plant is available in different capacities to meet the specific requirements of the industry. We are among the prominent Manufacturers of Sewage Treatment Plant in India whose products are widely accepted in industries. The Sewage Water Treatment Plant is fit for all kinds of biological and chemical treatments. Treatment Techniques The basic technology generally used for the treatment of Sewage is activated sludge process. This applies to both small and large processing plants and the difference lies in the arrangement and enhancement of the various sections of the process. The activated sludge process is a natural process and nature offers us a unique solution to treat sewage. Nature has provided a special balance in this process in that the micro organisms present when the food levels are high, will also consume the largest amount. This allows the quick breakdown of the BOD levels to more reasonable levels. Once these levels are reached, other microorganisms, which are heavier and less mobile, will reduce the BOD levels further, until the final acceptable standards are obtained The fact that the last organisms are large and heavy, allows us in practical terms to settle these organisms out very efficiently, producing a clear liquor. To balance the process, we can identify four major sections in a activated sewage plant system: Collection and anaerobic storage Aeration of the Sludge Setting of the sludge removing all solids Chlorination and phosphor removal to bring the final effluent up to the required standard Biological Treatment Biological treatment is the process of utilizing naturally occurring living organisms to degrade, stabilize and destroy organic contaminants. These microorganisms use the waste as their source of energy and carbon. Biological treatment technologies are restricted to organic wastes, and therefore have limited application. It is appropriate at this point to review some principles of biological process. All living organisms require a source of energy and carbon to be able to develop and reproduce. Many organisms (autographic) get their carbon from inorganic compounds (such as CO2), while other organisms (heterotrophic) use organic compounds to get their carbon. Aerobic and anaerobic metabolic pathways are used by microorganisms to degrade organic waste. During aerobic respiration, the organism utilizes oxygen to break down complex organic compounds into simple in organic salts, carbon dioxide and water. These microorganisms require an electron acceptor (oxygen in the case of aerobic), nutrients such as nitrogen (N) and phosphorous (P), and other trace elements. One of the most important characteristics of the waste is its biodegradability. Microorganisms can either directly use the contaminated waste and gain energy and carbon from it; or, with the help of another substance they can co-metabolically break down the contaminated waste. The biodegradability of a waste can be measured in the laboratory through BOD (5) / COD tests. BOD (biological oxygen demand) is a test through which contaminants can be categorized according to their biodegradability. COD (chemical oxygen demand) is a measure of the oxygen required to oxidize all compounds in water, both organic and inorganic. Chemical Treatment The technologies described in this section are chemical treatment technologies that are used for the cleanup of uncontrolled hazardous waste sites. In general, chemical treatments alter the structure of the waste constitutions to render them less hazardous than their original form. The objectives in using chemicals and chemical reaction are to either immobilize, mobilize for extraction, or detoxify the contaminants. A chemical technology may achieve one or all of the above tasks. Before describing any of the treatments in detail, a few points must be emphasized. The feasibility of chemical treatment is dependent on site and waste characteristics. Therefore, a careful study of site hydrology and geology must be performed before choosing teleology. Many chemical treatments involve delivery of a fluid to the subsurface. Care must be taken to avoid the migration of treatment reagents since they can be toxic themselves. Chemical treatment can be applied to both organic and inorganic wastes. However, a detailed study of the waste must be done, so that the wrong reagents are not mixed with the waster resulting in increased toxicity. Sequential Batch Reactor The Sequential Batch Reactor combines. The efficiency of activated sludge aeration with batch. Treatment to provide exceptional efficient quality even. Under extreme loadings. Benefits And Features Reduces main pollutants including ammonia by 95% Reduces phosphates by 99% Batching system eliminates peak surges Fully recyclable All components easily accessible The SBR uses an aeration process known as activated sludge but operates on a storage and batch treatment cycle Which ensures full treatment of all the effluent � even under pack flow conditions. Crucle sewage enters the primary Settlement Tank where gross solids settle out and the supernatant liquor. remaining near the surface can be drawn off. Substantial buffer storage volume is provided to cope with even the most extreme peak flow loadings and aerated by a powerful air bubble diffusers for a period of 4 to 6 hours. During this aeration cycle efficient Oxygen transfer cultures of bacteria (the active sludge) which feeds on the sewage liquor thereby removing most of the organic pollutants. After carnation, the bubble diffuser is switched off and three is a setting period of two hours during which the dense activated sludge sinks to the bottom leaving behind the clarified effluent, which is then discharged in to the drain. The SBR is an advanced biological aeration type treatment plant designed to produce a very high quality of final effluent in addition to overcoming several of the common problems Common problems, which normally occur, in other treatment plants are : Peak surges flow (i.e. Mornings and evenings) can force effluent through the Plant before it has had sufficient treatment time. Fixed film, types, which have a media matrix, can suffer from media blockage because of excessive bacteria growth. Replacement / maintenance of the media material may be required at regular intervals. Mechanical / electrical components within the tanks are difficult to maintain and can be a safety risk. The liquor is not spread evenly over the available bacteria preventing an adequate Oxygen supply.

• Packaging Type: Wooden Box
• Pressure: Low Pressure
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Type: Cosmetic Packaging Machine
• Material: Mild Steel
• Condition: New
• Automatic Grade: Semi automatic, Automatic
• Driven Type: Electric

Single Phase Power Load :  5KW Motor :  Servo Auger S Screw & Pipe Power Supplied : 220V/50Hz, 110V/60Hz

• Voltage: 220V
• Certification: ISO
• Packaging Type: Pouch, Pouch
• Automatic Grade: Automatic
• Driven Type: Pneumatic
• Power: 3KW
• Type: Packing Machine
• Lead Time: 45 Days
• Dimension(L*W*H): 2200mm x170omm x 2300mm
• Place of Origin: Haryana, India
• Model Number: KSPM
• Port: Delhi

Product of in-house research and development in Collaboration with international precision measurement exports   The complete filling system consists of:   Electronic filling carousels Stationary filling machines Cylinder introduction and ejection units Chain conveyor and drive units Electronic control panels and PLC Electronic check scales Data communication software Leak detectors

• Supply Ability: As per customer requirements
• Brand Name: BP
• Port: Delhi Dry Port
• After-sales Service Provided: No overseas service provided
• Packaging Details: Machine pack in wooden box.
• Year: 2005

• Packaging Speed: 35 - 65 bag/min
• Metering range: 150 - 1300ml
• Film thickness: 0.04 - 0.08

The versatile and modern large vertical FFS with multi-head weigher is suitable for all your packing and weighing needs. The machine runs smoothly over extended periods of operation and provides greater returns on your investment. Features Right, Quick, Not break material. High standard, high efficiency, reduce cost. Adapt to the packing of high and delicate product

• Machine Type: Hot Chamber
• Brand Name: MGI
• Cleaning Type: Surface Cleaning
• Automation Grade: Automatic
• Max Casting Area: 0-50 cm
• Die Locking Force: 10-20 ton
• Cleaning Process: Alkaline Cleaning
• Is It Portable: Portable

• Country of Origin: India
• Type: Automatic Collar Type Machine
• Certification: ISO 9001:2008
• Weight: 4000-6000kg

Salient Features Fully automatic collar type form fill & seal machine is an intermittent system Has tendency to pack various products vis-à-vis rice, flour, sugar, tea, coffee, chips etc. The base machine can handle automatic weigh filters as well as auger fillers Can handle all kinds of laminated films vis-à-vis polyester / BOPP / Polyethylene / Al-foil etc. If required virgin films can be entertained on impulse heat sealing system. Contact parts in stainless steel.

• Type: Liquid Filling Machinery
• Usage: Liquid Filling
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V, 480V, 580V
• Condition: New, Used
• Usage: Liquid Filling
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw, 12-15 Kw ,15-18 Kw ,18-20 Kw
• Warranty: 1year, 2years
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Automatic Grade: Automatic
• Driven: Electric, Hydraulic, Mechanical, Pneumatic

• Country of Origin: India
• Type: Sewage Treatment Plant
• Certification: ISO 9001:2008
• Automatic Grade: Semi Automatic

Sewage treatment plant Water treatment plant Oil and grease trep Effluent treatment plant Air pollution control plant