Filling Machine Dealers in Mujesar, Faridabad

• Country of Origin: India
• Type: Automatic Collar Type Machine
• Certification: ISO 9001:2008
• Weight: 4000-6000kg

Salient Features Fully automatic collar type form fill & seal machine is an intermittent system Has tendency to pack various products vis-à-vis rice, flour, sugar, tea, coffee, chips etc. The base machine can handle automatic weigh filters as well as auger fillers Can handle all kinds of laminated films vis-à-vis polyester / BOPP / Polyethylene / Al-foil etc. If required virgin films can be entertained on impulse heat sealing system. Contact parts in stainless steel.

• Material: Woven Sack & Non-Woven Bags
• Dimension (Approx): 6000 x 10000 x 1800 mm
• Max Speed: 20 - 25 pcs / min.

FAIRPRINT Automatic Rice Bag Stitching Machine is a Breakthru' Innovative Design to deliver Latent needs of Global Consumers for mass production efficiently at very competitive running cost. FAIRPRINT 'an ideal for best quality jobs' is highly productive for Rice Bag Stitching for Woven-Sack & Non-Woven Fabric.Huge range of Bag Stitching Machine can make bags with Bottom Stitching for Side Gusset Woven-Sack bags & L-Shape stitching for Non-Woven Rice bags.

DISTINCT FEATURES Provision for Two Rolls on unwind Sealers are both end supported End roll detection synchronized with PLC & Filling Provision for batch cutting & counting Temperature Control and Heater Failure Indication is through PLC hence, eliminating the need for temperature controller Paper break detection sensor Joint detection sensor (optional) Hopper level controller

• Power: 1/2 & 1/4H.P. 220VSingle Phase 50 – 60 Hz Heater : 150W – 2Pc,200W – 2Pc, 300W – 2Pc,500W – 2 Pc.
• Application: for Packing granules and liquid in one sachet.
• Speed (Bag/min.): 30 – 60.
• Filling Cap.Gms/ml: 50 – 100gms/10 – 100 ml.
• Bag Size mm: (RW)180 – 340,(L)120 – 240.
• Seal Style: Side Seal/Four Side Seal
• Measuring Method: Cup & liquid dosage pump
• Laminate Structure: Polyester/ Met/ Al Laminated Foil, Heat Sealable plain, Pearliest BOPP & any Heat Sealable Film Core Dia: 75 mm Max Outer Dia : 350mm.
• Weight Kg (gross): 600
• Dimension: 1000 x 910 x 1560.
• Products to Pack: popcorn,salt & oil

• Type: Filling Machine, Packing Machine
• Condition: New
• Application: Beverage
• Place of Origin: India
• Packaging Material: Plastic
• Automatic Grade: Automatic
• Packaging Type: Other
• Lead Time: 4 Weeks
• Supply Ability: 5 Unit/Units per Month

• Type: Automatic
• Certification: CE Certified
• Weight: 1000-2000kg
• Voltage: 380V
• Power: 1-3kw
• Warranty: 1 Year

• Type: Sand Blasting Machine
• Weight: 100-1000kg
• Color: Natural
• Voltage: 110V
• Application: Sand Blasting
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

Being an established brand in the industry we are offering Sand Blasting Machine to our valued clients. The product we offer is excellent in quality, as it is manufactured by using the excellent quality materials along with the latest technology. The product is designed for precision and excellence by our experienced team of professionals.  Our product is highly demanded, as it is used for various applications like cleaning of molds, putting grains on the molds, preparing the surface for painting, coating, and much more. We are offering this machine at a very marketable rate.   Portable Abrasive Blaster The portable abrasive blaster are safe, high productivity systems designed for use with a wide range of abrasive media. The operation is performed on metals, glass, ceramics, plastic and stone. The machine works on pressure blasting principle, consist of a blast generator. The abrasives are filled at the top of machine when machine is not working and blast generator is not pressurized. At the top, a vibrating sieve is provided to sieve the abrasive filled. The oversize abrasive and debris are retained on the screen, thus prevent the choking of blast line. When mushroom valve is opened the abrasive will get transferred to blast generator for blasting. The mushroom valve gets closed when compressed air is switched on and abrasive storage tank gets pressurized, for free fall of abrasive into the mixing tube. From mixing tube the abrasive is carried away by compressed air to the nozzle for blasting. The Blast Generator is fabricated from MS Steel plate of thickness not less than 6 mm as per IS-2825 and hydraulically tested for 250 psi.

The Motorized Mobile Grease Filling System is attributed for its reliability and productivity. Since inception, we are involved in selling of premium Hand Operated Mobile Grease Filling System, as we are its top supplier in the marketplace. In order to make available high quality product range, we make use of the finest grade raw material that is sourced from the trusted places after complete assurance of the quality.

• Material: Stainless Steel
• Brand Name: Speedopak
• Filling Range: 5 gm to 500 gm
• Minimum Capacity: 20 Pouches per minute
• Maximum Capacity: 60 Pouches per minute
• Pouch Dimensions: 100-300 mm (W),50-300 mm (L)
• Power Consumption: 3 Kw

• Automatic Grade: Manual
• Power: 1-3kw
• Application: Filling

Pick ,fill and  Sealing Machine with weight filler for filling & sealing of preformed pouches of snack foods , dry fruits, Seeds, Chips, Mixtures etc. The machine works automatically in picking, filling and sealing of pouches. It offers flexibility of using pouches in different forms such as stand-up pouches, pouches with spouts, zippers and many more.

The Sewage Treatment Plant offered by us is the best example of the latest development of technology. The Industrial Sewage Treatment is manufactured strictly adhering to the international guidelines so that it ensures total freedom from pollution. The Sewage Treatment Plant is available in different capacities to meet the specific requirements of the industry. We are among the prominent Manufacturers of Sewage Treatment Plant in India whose products are widely accepted in industries. The Sewage Water Treatment Plant is fit for all kinds of biological and chemical treatments. Treatment Techniques The basic technology generally used for the treatment of Sewage is activated sludge process. This applies to both small and large processing plants and the difference lies in the arrangement and enhancement of the various sections of the process. The activated sludge process is a natural process and nature offers us a unique solution to treat sewage. Nature has provided a special balance in this process in that the micro organisms present when the food levels are high, will also consume the largest amount. This allows the quick breakdown of the BOD levels to more reasonable levels. Once these levels are reached, other microorganisms, which are heavier and less mobile, will reduce the BOD levels further, until the final acceptable standards are obtained The fact that the last organisms are large and heavy, allows us in practical terms to settle these organisms out very efficiently, producing a clear liquor. To balance the process, we can identify four major sections in a activated sewage plant system: Collection and anaerobic storage Aeration of the Sludge Setting of the sludge removing all solids Chlorination and phosphor removal to bring the final effluent up to the required standard Biological Treatment Biological treatment is the process of utilizing naturally occurring living organisms to degrade, stabilize and destroy organic contaminants. These microorganisms use the waste as their source of energy and carbon. Biological treatment technologies are restricted to organic wastes, and therefore have limited application. It is appropriate at this point to review some principles of biological process. All living organisms require a source of energy and carbon to be able to develop and reproduce. Many organisms (autographic) get their carbon from inorganic compounds (such as CO2), while other organisms (heterotrophic) use organic compounds to get their carbon. Aerobic and anaerobic metabolic pathways are used by microorganisms to degrade organic waste. During aerobic respiration, the organism utilizes oxygen to break down complex organic compounds into simple in organic salts, carbon dioxide and water. These microorganisms require an electron acceptor (oxygen in the case of aerobic), nutrients such as nitrogen (N) and phosphorous (P), and other trace elements. One of the most important characteristics of the waste is its biodegradability. Microorganisms can either directly use the contaminated waste and gain energy and carbon from it; or, with the help of another substance they can co-metabolically break down the contaminated waste. The biodegradability of a waste can be measured in the laboratory through BOD (5) / COD tests. BOD (biological oxygen demand) is a test through which contaminants can be categorized according to their biodegradability. COD (chemical oxygen demand) is a measure of the oxygen required to oxidize all compounds in water, both organic and inorganic. Chemical Treatment The technologies described in this section are chemical treatment technologies that are used for the cleanup of uncontrolled hazardous waste sites. In general, chemical treatments alter the structure of the waste constitutions to render them less hazardous than their original form. The objectives in using chemicals and chemical reaction are to either immobilize, mobilize for extraction, or detoxify the contaminants. A chemical technology may achieve one or all of the above tasks. Before describing any of the treatments in detail, a few points must be emphasized. The feasibility of chemical treatment is dependent on site and waste characteristics. Therefore, a careful study of site hydrology and geology must be performed before choosing teleology. Many chemical treatments involve delivery of a fluid to the subsurface. Care must be taken to avoid the migration of treatment reagents since they can be toxic themselves. Chemical treatment can be applied to both organic and inorganic wastes. However, a detailed study of the waste must be done, so that the wrong reagents are not mixed with the waster resulting in increased toxicity. Sequential Batch Reactor The Sequential Batch Reactor combines. The efficiency of activated sludge aeration with batch. Treatment to provide exceptional efficient quality even. Under extreme loadings. Benefits And Features Reduces main pollutants including ammonia by 95% Reduces phosphates by 99% Batching system eliminates peak surges Fully recyclable All components easily accessible The SBR uses an aeration process known as activated sludge but operates on a storage and batch treatment cycle Which ensures full treatment of all the effluent � even under pack flow conditions. Crucle sewage enters the primary Settlement Tank where gross solids settle out and the supernatant liquor. remaining near the surface can be drawn off. Substantial buffer storage volume is provided to cope with even the most extreme peak flow loadings and aerated by a powerful air bubble diffusers for a period of 4 to 6 hours. During this aeration cycle efficient Oxygen transfer cultures of bacteria (the active sludge) which feeds on the sewage liquor thereby removing most of the organic pollutants. After carnation, the bubble diffuser is switched off and three is a setting period of two hours during which the dense activated sludge sinks to the bottom leaving behind the clarified effluent, which is then discharged in to the drain. The SBR is an advanced biological aeration type treatment plant designed to produce a very high quality of final effluent in addition to overcoming several of the common problems Common problems, which normally occur, in other treatment plants are : Peak surges flow (i.e. Mornings and evenings) can force effluent through the Plant before it has had sufficient treatment time. Fixed film, types, which have a media matrix, can suffer from media blockage because of excessive bacteria growth. Replacement / maintenance of the media material may be required at regular intervals. Mechanical / electrical components within the tanks are difficult to maintain and can be a safety risk. The liquor is not spread evenly over the available bacteria preventing an adequate Oxygen supply.

Features With print registration control system , conducts measuring , bag making , filling , sealing and cutting , all automatically. Easy to change for different pouch sizes. With change in feeding unit , the machine is suitable to pack variety of products like tablets , granules , powders, liquids, paste & other rectangular and irregular shaped solid products. Compact and easy to operate with all contact parts of stainless steel. Feeding head can be Cup / Auger / Weigh/Gravimetric fillers - depending on the product to be packed. Multitrack machines available.

We are offering pesticides stick packing machine. Rollatainers-toyo machine japan - offer fully automatic, most accurate, stick packing machine to fill pesticides products in sticks.

With the assistance of our experienced professionals, we are engaged in offering Collar Type Auger Filler Machine. We carry out our operations from Haryana, India. These products are used for packing of powder and free flowing products, a wide range of consumer packs with desired filling system. Our product range is prized for their reliable performance at economical prices.    Feature : Easy to operate, Suitable for all type of heat sealable laminated film, aluminum foil, Bump etc. Versatile and can be easily changed over from one pouch to another   Product specifications :  Packing Material - Heat Sealable Laminated Films Roll  Width - Max - 425MM, Min - 120MM  Pouch Type - Center Seal Pouch  Pouch Dimension - Width - 50-250MM  Height - 65-400MM  Power Consumption - 3KW  Production Rate  - 60 Shots Per Minute  Weight  - 400Kg(Approx.)  Machine Dimension - L 1050MM, W 990MM, H 1360MM

• Weight: 600 kg (Approx.)
• Pouch Dimensions: 50mm to 200mm, 65mm to 300mm
• Machine Dimension: L: 1800mm, W: 100mm, H: 1360mm (Approx.)

Candy, Chewing gum, Chocolates. Packing Material: Heat Sealable Laminated Films, Type of seal: Center Seal Pouch, Pouch Dimensions: Width : 50mm to 200mm, Height: 65mm to 300mm. Electrical Supply: 230V A.C. Single phase 50 Hz. Power Consumption: 2.5Kw, Single phase. Production Out Put: 300-450 per minute (Depend upon size of product). Weight: 600 kg (Approx.). Machine Dimension: L: 1800mm, W: 100mm, H: 1360mm (Approx.).

• Packaging Speed: 35 - 65 bag/min
• Metering range: 150 - 1300ml
• Film thickness: 0.04 - 0.08

The versatile and modern large vertical FFS with multi-head weigher is suitable for all your packing and weighing needs. The machine runs smoothly over extended periods of operation and provides greater returns on your investment. Features Right, Quick, Not break material. High standard, high efficiency, reduce cost. Adapt to the packing of high and delicate product

We are successfully ranked amongst the top traders and suppliers of Pyramid Tea Bag Packing Machine

• STEEL GREY: SIEMENS

We are offering powder packing machine. Collar type auger base ffs machine for packing powder in laminated pouches. Servo driven system for high accuracy with speed. Packing range-250g-500gms speed- 25-30 packets per minute

• Supply Ability: As per customer requirements
• Brand Name: BP
• Port: Delhi Dry Port
• After-sales Service Provided: No overseas service provided
• Packaging Details: Machine pack in wooden box.
• Year: 2005

• Country of Origin: India
• Type: Sewage Treatment Plant
• Certification: ISO 9001:2008
• Automatic Grade: Semi Automatic

Sewage treatment plant Water treatment plant Oil and grease trep Effluent treatment plant Air pollution control plant

• Sealing Style: 4 Side Seal
• Speed: 70 Strokes / minute maximum (Depends upon the type of product & quantity to be filled)
• No. of Tracks: Depends upon the width of the pouch
• Laminate Specification: Width - 1000 mm max. Roll Dia - 600mm. max. Reel Core I.D.- 150/76 mm
• Packing Material: Laminates with one side heat sealable
• Filling Capacity: 1ml-300ml
• Product To Be Packed: Liquid / Paste within a dosable viscosity range
• Sealing Drives: Vertical – Servo Driven Horizontal – Servo Driven
• Filling Mechanism: Piston Filler
• Perforation and Cutting: As per customer requirement
• Laminate Roll Unwind: Motor driven – Bonfiglioli Geared Motor.
• Laminate Draw Off System: PLC based Servo Driven
• Control: Through Touch Screen Panel (HMI)
• Laminate Tracking System: E+L web aligner – Digital.
• Main Control Panel: Air cooled panel – BCH make or Rittal
• Contact Parts: SS 316 L
• Indirect Contact Parts: SS 304 / 316
• Batch Cutting: Can be programmed through PLC
• Mat Format: In built feature of the Machine.
• Electrical Spec.: Main Motor – 2.2 KW, 3 Phase, 415 V Connected load – 14 Kw. Consumption – 11 Kw. PLC controlled Operations RTD module with PLC for Temperature controllers
• Layout Dimensions: Length -3200 mm
•  : Width - 2600 mm
•  : Height - 2100 mm
• Machine Weight: Net Weight - 3500 kgs. Gross weight - 4000 kgs.
• Compressed Air: Operating Pressure – 5 Bar.
•  : Consumption – 3 CFM.
• Pneumatics: FESTO or equivalent.
• Machine Efficiency: 90%*
• Scrap Rate: Less than 2%*
• Machine Colour: Shell Grey – Powder coated.
• Weight Variation: Within +/- 1%** of the filled quantity

Generally used for Packing- Dosa Batter, Distemper Paste, Tomato Paste, Grease etc. Pneumatically Operated with PLC Controlled especially designed for high viscous Paste. Machine equipped with Paste filling Pump, activated by Pneumatic Cylinder.

Utilizes heavy duty self lubricated and enclosed indexer for the turret movement. A single three-phase motor and gearbox drives the full machine. VFD for variable speed drives the motor.   An adjustable torque non-contact magnetic clutch is provided for long life without wear and tear. The cap tightening chuck needs to be changed when cap changes. The chuck changing is very easy and quick.   All the electrical is mounted in the control panel. The control console is ergonomically placed for convenient operation The machine is provided with adjustable SS legs for leveling the machine in line with other machines.   (Depending on Can and cap sizes and shapes.) Can diameter:     – 35mm to 80mm. Can Height:  – 20mm to 60mm. Cap diameter –20 to 45mm with suitable change parts.. Power requirement:- 0.75KW