Filling Machine Dealers in Sector 55, Faridabad

• Driven Type: Electric
• Automation Grade: Automatic
• Voltage(V): 220 V
• Usage: Packing Turmeric Powder
• Frequency (Hertz): 50/60 Hz
• Material: Stainless Steel + Mild Steel
• Phase Type: Single Phase
• Motor: 1 HP, 415 VAC, Three Phase

Today, we have carved a niche as one of the major Water Treatment Plant Manufacturers & Suppliers, based in India. Our range of Industrial Water Treatment Plant includes softener, filter plants, d-mineralised plants, reverse osmosis plants and so on. Some of the salient features of our RO Water Treatment Plant are Scale free system: With the recommended treatment programme, the system will be maintained scale free, enhancing the efficiency of the equipments and reducing downtime. Increase in production: A scale free system will result in maximum heat transfer through the heat exchangers, condensers and other equipments. No sludge formation: NO sludge formation with our treatment programme. Eco friendly treatment: The treatment programme is Eco-friendly and therefore the blow down from the system can be disposed off without further treatment. Energy savings: Since there will not be any scale formation in the system, there will be a substantial savings in terms of energy and hence reducing the production cost, which is the requirement of the day. No regular descaling of the equipments: Frequent descaling of the equipments reduces the life span of the equipments. Our treatment maintains a scale & corrosion free system, thereby avoiding the descaling to great extent. Total control: The beauty of the treatment is that all the associated problems i.e. Corrosion, scaling and microbial growth will be taken care with our treatment programme.

We are offering liquids and pastes packing machine. Provision for two rolls on unwind sealers are both end supported end roll detection synchronized with plc & filling provision for batch cutting & counting temperature control and heater failure indication is through plc hence, eliminating the need for temperature controller paper break detection sensor joint detection sensor (optional) hopper level controller

• Product Application: Free Flow & Non Free Flow Powder, Milk Powder, Besan, Flour etc
• Filling Range: 1kg-10kg
• Sealing Type: Center Seal (Pillow Pack)
• Feeding System: Auger Filler (Servo Motor with Drive )
• Main Motor: 1 HP, AC Drive
• Operating Mechanism: Electro-Pneumtaic
• Machine Control: PLC(Programmable Logic Control)
• Types of Vertical Sealing: Overlap/Fin
• Electric Supply: 440V/AC/3 Phase/50 Hz
• Packaging Film: Heat Sealable Laminate/LDPE Pouches
• Temperature Controller: PID Based
• Machine Speed: 6-25 Pouch /min (Depends on Product nature)
• Contact Part: Stainless Steel 202/304/316
• Compressed Air: 6 CFM@6Bar
• Power Consumption: 4-6 KW
• Optional Attachment(An Extra Cost): Batch Coding device, Nitrogen Flushing.

Pneumatic Servo Auger Filler, multi track ffs machines

We are amidst the celebrated Manufacturers, Exporters and Suppliers in this domain. We have gained rich industry-experience and expertise, thus, we successfully present quality assured, robust and experts’ approved Multi Track Powder Sachet Filling & Sealing Machine. With exceptional manufacturing facilities, we bring forth machines that are cost-effective, well-designed, performance and result oriented. With complete help and support of diligent team members, we test the machines based on quality, performance, noise level and design. We deliver the machines as we have reliable logistics facilities.

• Application: Industrial
• Material: Stainless Steel
• Capacity: 6
• Voltage: 220-240 V
• Weight: 200-300 Kg
• Brand Name: Setpac
• Power Consumption: 3 kw

The Motorized Mobile Grease Filling System is attributed for its reliability and productivity. Since inception, we are involved in selling of premium Hand Operated Mobile Grease Filling System, as we are its top supplier in the marketplace. In order to make available high quality product range, we make use of the finest grade raw material that is sourced from the trusted places after complete assurance of the quality.

• Condition: New
• Warranty: 2 Years
• Material: Stainless Steel

• Type: fully automatic
• Brand Name: allpack
• Power: 3kw to 5kw
• Driven Type: PLC Control Servo drive
• Place of Origin: faridabad

We are offering sealing machine. Technical specification of ap-406: speed of the machine 120 pouchmin in laddi ( strip ) pouches weight 5gm to 25gm wt .cup changeable product type supari pouch width 70mm to 125mm adjustable pouch length 90-140mm adjustable sealing type four side seal pouch with inner zip lock machine sealing motion intermediate type horizontal & vertical seal width 5-8 mm all side number of tracks to meet the requested speed 50stroke min. Hopper capacity in kg 50kg filling system type cup changeable slide cup filler filling accuracy ± 2% track weight adjustment all track same time wt adjustment level sensor type & brand banner make data logic etc. maximum roll width 600 mm maximum roll diameter 20 inch type approx 500mm dai roll lock type thread nut for lock system tear notch for easy open straight - type perforation cut pouch production counter digital display or touch screen film draw mechanism electromagnetic clutch brake paper pulling film centering mechanism manual sifting no film no filling safety function film sensor indicate & control filling sachet width adjusting possibility ± 10 mm adjustment sealer materials ss-410 all sealer main body materials big parts mild steel fabricated contact part materials ss-304 all machinery conveyor & connected parts ss-304 plc, hmi, motors, drive, photocells, electrical parts, heating elements, power supply and pneumatic parts manufacturing brand plc, drive ,hmi hw festo make valve & jenetic make valve cylinder & fitting emboss coding ss metal digit use emboss coding optional at extra cost electrical requirements 3ph with neutral 440 ± 10 electrical consumption as kw 5 kw compressed air requirement & consumption 5cfm machine dimensions and weight 2.5x2x2 mtr +2000 kg

• Type: Automatic
• Certification: CE Certified
• Weight: 1000-2000kg
• Voltage: 380V
• Power: 1-3kw
• Warranty: 1 Year

  Features We offer premium quality Candy Mini Pillow Wrapping Machines to our clients. These machines are manufactured using premium quality raw material and hence, have a capacity of wrapping 500-600 candies per minute. Their high performance makes them find extensive usage in the confectionery sector. With print registration control system suitable to pack candies , chewing gum , herbal-drops,  toffee , toffee bar , chocolate bar , gum balls etc. Equipped with Programmable Logic Controller. Wrapping speed varies from 250 to 1200 candies per minute depending upon machine model. Machine is made trouble free with as seal of quality. Spare parts available ex-stock.

We are offering automatic form fill seal machine, baba packaging one none of these manufactures of assorted sorts automatic ffs machine provides an integrated operation from activity, bag making, filling and cutting for packaging. Powder filling machine is provided with an electric eye equipment for powder filling, powder packing, masala packing, chips, granules, tablets, pan masala, tobacco and its bye merchandise, candy, jaljeera powder, detergent powder, lerron powder, fish powder, bettlenut, concentrates, tea, coffee, disposable syringes, prescribed drugs etc.

• Weight: 700 kgs.
• size (mm): L : 40-300, W : 20-125, H : 5-56
• Dimension: 3600 (L) x 1500(W) 2000(H)

The horizontal pillow wrapping machines can wrap all kind of commodities such as Biscuits, Candies, Wafers, Chocolate, Bars, Chewing gums, Soaps, Instant Noodles, Dry cells, Facial paper, Crackers and any other rectangular, square, round or irregular shaped products. Suitability to pack variety of solid Shapes & Material. Capacity to pack variety of sizes with high speed & safety. Pouch cut-off length can be calibrated by hand wheel. All contact parts are made of stainless steel. With design registration system.

The Sewage Treatment Plant offered by us is the best example of the latest development of technology. The Industrial Sewage Treatment is manufactured strictly adhering to the international guidelines so that it ensures total freedom from pollution. The Sewage Treatment Plant is available in different capacities to meet the specific requirements of the industry. We are among the prominent Manufacturers of Sewage Treatment Plant in India whose products are widely accepted in industries. The Sewage Water Treatment Plant is fit for all kinds of biological and chemical treatments. Treatment Techniques The basic technology generally used for the treatment of Sewage is activated sludge process. This applies to both small and large processing plants and the difference lies in the arrangement and enhancement of the various sections of the process. The activated sludge process is a natural process and nature offers us a unique solution to treat sewage. Nature has provided a special balance in this process in that the micro organisms present when the food levels are high, will also consume the largest amount. This allows the quick breakdown of the BOD levels to more reasonable levels. Once these levels are reached, other microorganisms, which are heavier and less mobile, will reduce the BOD levels further, until the final acceptable standards are obtained The fact that the last organisms are large and heavy, allows us in practical terms to settle these organisms out very efficiently, producing a clear liquor. To balance the process, we can identify four major sections in a activated sewage plant system: Collection and anaerobic storage Aeration of the Sludge Setting of the sludge removing all solids Chlorination and phosphor removal to bring the final effluent up to the required standard Biological Treatment Biological treatment is the process of utilizing naturally occurring living organisms to degrade, stabilize and destroy organic contaminants. These microorganisms use the waste as their source of energy and carbon. Biological treatment technologies are restricted to organic wastes, and therefore have limited application. It is appropriate at this point to review some principles of biological process. All living organisms require a source of energy and carbon to be able to develop and reproduce. Many organisms (autographic) get their carbon from inorganic compounds (such as CO2), while other organisms (heterotrophic) use organic compounds to get their carbon. Aerobic and anaerobic metabolic pathways are used by microorganisms to degrade organic waste. During aerobic respiration, the organism utilizes oxygen to break down complex organic compounds into simple in organic salts, carbon dioxide and water. These microorganisms require an electron acceptor (oxygen in the case of aerobic), nutrients such as nitrogen (N) and phosphorous (P), and other trace elements. One of the most important characteristics of the waste is its biodegradability. Microorganisms can either directly use the contaminated waste and gain energy and carbon from it; or, with the help of another substance they can co-metabolically break down the contaminated waste. The biodegradability of a waste can be measured in the laboratory through BOD (5) / COD tests. BOD (biological oxygen demand) is a test through which contaminants can be categorized according to their biodegradability. COD (chemical oxygen demand) is a measure of the oxygen required to oxidize all compounds in water, both organic and inorganic. Chemical Treatment The technologies described in this section are chemical treatment technologies that are used for the cleanup of uncontrolled hazardous waste sites. In general, chemical treatments alter the structure of the waste constitutions to render them less hazardous than their original form. The objectives in using chemicals and chemical reaction are to either immobilize, mobilize for extraction, or detoxify the contaminants. A chemical technology may achieve one or all of the above tasks. Before describing any of the treatments in detail, a few points must be emphasized. The feasibility of chemical treatment is dependent on site and waste characteristics. Therefore, a careful study of site hydrology and geology must be performed before choosing teleology. Many chemical treatments involve delivery of a fluid to the subsurface. Care must be taken to avoid the migration of treatment reagents since they can be toxic themselves. Chemical treatment can be applied to both organic and inorganic wastes. However, a detailed study of the waste must be done, so that the wrong reagents are not mixed with the waster resulting in increased toxicity. Sequential Batch Reactor The Sequential Batch Reactor combines. The efficiency of activated sludge aeration with batch. Treatment to provide exceptional efficient quality even. Under extreme loadings. Benefits And Features Reduces main pollutants including ammonia by 95% Reduces phosphates by 99% Batching system eliminates peak surges Fully recyclable All components easily accessible The SBR uses an aeration process known as activated sludge but operates on a storage and batch treatment cycle Which ensures full treatment of all the effluent â₉€œ even under pack flow conditions. Crucle sewage enters the primary Settlement Tank where gross solids settle out and the supernatant liquor. remaining near the surface can be drawn off. Substantial buffer storage volume is provided to cope with even the most extreme peak flow loadings and aerated by a powerful air bubble diffusers for a period of 4 to 6 hours. During this aeration cycle efficient Oxygen transfer cultures of bacteria (the active sludge) which feeds on the sewage liquor thereby removing most of the organic pollutants. After carnation, the bubble diffuser is switched off and three is a setting period of two hours during which the dense activated sludge sinks to the bottom leaving behind the clarified effluent, which is then discharged in to the drain. The SBR is an advanced biological aeration type treatment plant designed to produce a very high quality of final effluent in addition to overcoming several of the common problems Common problems, which normally occur, in other treatment plants are : Peak surges flow (i.e. Mornings and evenings) can force effluent through the Plant before it has had sufficient treatment time. Fixed film, types, which have a media matrix, can suffer from media blockage because of excessive bacteria growth. Replacement / maintenance of the media material may be required at regular intervals. Mechanical / electrical components within the tanks are difficult to maintain and can be a safety risk. The liquor is not spread evenly over the available bacteria preventing an adequate Oxygen supply.

We are leading Supplier, exporter and manufacturers of juice filling machine or small juice filling machine or fruit juice filling and packaging machine in faridabad, delhi ncr, calcutta, guwahati, kerala, bangalore, goa, jaipur, bhopal, indore, ludhiana, rohtak, hisar, sonipat, panipat, patna, agra, lucknow, Kanpur, banaras, varanasi, meerut, rudrapur, bareilly, gorakhpur, dehradun, haridwar, baddi, paonta sahib, simla, pune, ambala, jaisalmer, udaipur, ahmedabad, palwal, aligarh, ranchi, chennai, bhubaneswar, srinagar, jammu.

• STEEL GREY: SIEMENS

We are offering powder packing machine. Collar type auger base ffs machine for packing powder in laminated pouches. Servo driven system for high accuracy with speed. Packing range-250g-500gms speed- 25-30 packets per minute

• Country of Origin: India
• Type: Sewage Treatment Plant
• Certification: ISO 9001:2008
• Automatic Grade: Semi Automatic

Sewage treatment plant Water treatment plant Oil and grease trep Effluent treatment plant Air pollution control plant

Generally used for Packing- Dosa Batter, Distemper Paste, Tomato Paste, Grease etc. Pneumatically Operated with PLC Controlled especially designed for high viscous Paste. Machine equipped with Paste filling Pump, activated by Pneumatic Cylinder.

• Phase: Single Phase, Three Phase
• Material: Stainless Steel, Mild Steel
• Automatic Grade: Manual, Semi-Automatic
• Condition: New
• Weight (Kilogram): 160 Kg
• Frequency (Hertz): 50 Hz
• Material grade: SS316
• Surface: Mirror polish

• Application: ALL TYPES
• Material: Stainless Steel
• Machine Type: Manual
• Filling System: Fully Automatic

• Packaging Speed: 35 - 65 bag/min
• Metering range: 150 - 1300ml
• Film thickness: 0.04 - 0.08

The versatile and modern large vertical FFS with multi-head weigher is suitable for all your packing and weighing needs. The machine runs smoothly over extended periods of operation and provides greater returns on your investment. Features Right, Quick, Not break material. High standard, high efficiency, reduce cost. Adapt to the packing of high and delicate product

• Sealing Style: 4 Side Seal
• Speed: 70 Strokes / minute maximum (Depends upon the type of product & quantity to be filled)
• No. of Tracks: Depends upon the width of the pouch
• Laminate Specification: Width - 1000 mm max. Roll Dia - 600mm. max. Reel Core I.D.- 150/76 mm
• Packing Material: Laminates with one side heat sealable
• Filling Capacity: 1ml-300ml
• Product To Be Packed: Liquid / Paste within a dosable viscosity range
• Sealing Drives: Vertical – Servo Driven Horizontal – Servo Driven
• Filling Mechanism: Piston Filler
• Perforation and Cutting: As per customer requirement
• Laminate Roll Unwind: Motor driven – Bonfiglioli Geared Motor.
• Laminate Draw Off System: PLC based Servo Driven
• Control: Through Touch Screen Panel (HMI)
• Laminate Tracking System: E+L web aligner – Digital.
• Main Control Panel: Air cooled panel – BCH make or Rittal
• Contact Parts: SS 316 L
• Indirect Contact Parts: SS 304 / 316
• Batch Cutting: Can be programmed through PLC
• Mat Format: In built feature of the Machine.
• Electrical Spec.: Main Motor – 2.2 KW, 3 Phase, 415 V Connected load – 14 Kw. Consumption – 11 Kw. PLC controlled Operations RTD module with PLC for Temperature controllers
• Layout Dimensions: Length -3200 mm
•  : Width - 2600 mm
•  : Height - 2100 mm
• Machine Weight: Net Weight - 3500 kgs. Gross weight - 4000 kgs.
• Compressed Air: Operating Pressure – 5 Bar.
•  : Consumption – 3 CFM.
• Pneumatics: FESTO or equivalent.
• Machine Efficiency: 90%*
• Scrap Rate: Less than 2%*
• Machine Colour: Shell Grey – Powder coated.
• Weight Variation: Within +/- 1%** of the filled quantity

With the assistance of our experienced professionals, we are engaged in offering Collar Type Auger Filler Machine. We carry out our operations from Haryana, India. These products are used for packing of powder and free flowing products, a wide range of consumer packs with desired filling system. Our product range is prized for their reliable performance at economical prices.    Feature : Easy to operate, Suitable for all type of heat sealable laminated film, aluminum foil, Bump etc. Versatile and can be easily changed over from one pouch to another   Product specifications :  Packing Material - Heat Sealable Laminated Films Roll  Width - Max - 425MM, Min - 120MM  Pouch Type - Center Seal Pouch  Pouch Dimension - Width - 50-250MM  Height - 65-400MM  Power Consumption - 3KW  Production Rate  - 60 Shots Per Minute  Weight  - 400Kg(Approx.)  Machine Dimension - L 1050MM, W 990MM, H 1360MM

• Voltage: 320 - 440 V
• Material: Mild Steel
• Usage/Application: Sand Blasting
• Automation Grade: Automatic
• Frequency: 50 - 60 Hz
• Cabinet Length: 600 mm
• Cabinet Width: 500 mm
• Cabinet Height: 520 mm
• Work Pressure: 7 Bar

• Brand Name: Pack Tech Pack
• Machine Type: Semi-Automatic, Automatic

We are offering fully automatic jat filling machine with foil seal attachment to pack liquids(like ghee), powders and granules.

We are one of the well reckoned Automatic Cup Filler Exporters from India. We offer international standard Cup Filler to pack granules like tea, rice, pulses, gutka, supari, etc. Apart from being a leading manufacturer, we are also one of the renowned Cup Filler Machine Suppliers from India. Our Cup Filler is well known for its precision.