Filters Dealers in Sector 6, Faridabad

• Type: Watts
• Voltage: Depth of Immersion ‘A’
• Flange: *OHST 10/43.8
• 1000: 230
• 438 mm: 2½” BSPP
• *OHST 15/43.8: 1500
• 230: 438 mm
• 2½” BSPP: **OHST 20/43.8
• 2000: 230
• 438 mm: 2½” BSPP
• ***OHST 30/43.8: 3000
• 230/400(λ): 438 mm
• 2½” BSPP: ***OHST 40/57.5
• 4000: 230/400(λ)
• 575 mm: 2½” BSPP

The mechanism of fibre filters is well known and is basically a combination of impingement for particles greater than 1-2 microns in diameter and diffusion for the finer, particles when brownian motion becomes increasingly predominant. As the gas passes through the filter bed the small mist particles are bombarded by the gas molecules surrounding them, causing them to move in various direction, towards and away from  the surface of the fibres making up the filters Each filter is composed of millions of fibres and although the efficiency of each individual fibre is low the cumulative effect is very high. Low approach velocities are necessary in order to mask the diffusion velocities associated with brownian movement. The candle are installed vertically and gases pass horizontally through the filter wall, the trapped particles coalescing and draining down through the filter bed. With the innovative 2 Pack design CPL provides inexpensive solution to mist emission control problems. particle impingment & collection Gas flow through candles can be either inside/outside or outside/inside depending upon the sitting of the installation and  the method of securing the candles in place.   Compressed air and refrigerant gases Oil mist removal Fertiliser prill towers Ammounium chloride mist Chromic Acid mist Sulphuric Acid mist Phosphoric Acid mist Hydrochloric Acid mist Wet chlorine gas Dry chlorine gas Plasticiser mist

We are offering filter press machine that is highly appreciated by clients across the globe. The filter press machine is used as separation devices for solid or liquid separation process. We offer the filter press machine at market leading rates to the clients. .

The BACHMANN Panel Filter Houses provide efficient filtration of air for Gas Turbines and Diesel Engines. Comprehensive filter product range is capable of meeting all requirements, up to the maximum levels of separation efficiency.   PULSE-JET filterhouses comprised of banks of cartidge filters are ‘self-cleaned’ by means of sequential reverse-flow pulses of compressed air. Cartridges are available to suit all environments, and efficiencies in excess of 99% can be achieved. Evaporative Cooling Systems, lead to lead to increased power output and an improved gas turbine heat rate, particularly in warm and dry climates

We are acknowledged for providing only damage-free products to the clients. For this, we make use of quality and tamper-free packing materials along with sophisticated packing machines. We are capable of make on-time deliveries of the product range that we keep safe in our massive warehouse.

• Material: Mild Steel
• Brand Name: na
• Corrosion Resistance: yes
• Power Source: Electric
• Voltage: 240v
• Usage/Application: Industrial
• Features: easy to use
• Chamber Size Mm X Mm X Mm: na
• Surface Finish: polished

Water from Natural Sources contains suspended colloid. The conventional sand filter, multi grade filters are used to remove suspended matters in raw water. The activated carbon filters are used for removal of colour, order and free chlorine content of water. In effect, raw water with micron size un-dissolved matters should be passed through Micron Cartridge Filter. The water filtration process involves the flow of water via a granular bed of filtring sand or another suitable media. The water to be filtered flows at a low speed. The media (the filter) retains most of the solid matters and let the water pass through it. The process of filtration is generally repeated to ensure sufficient removal of unwanted particles in the water.

• Material: Metal
• Shape: Round
• Color: White
• Thickness: 0-50cm
• Application: Air Filtration, Gas Filtration
• Application: Industrial
• Drive Type: Electric

Our Reverse Jet Filter is comprehensively demanded by the buyers owing to its features of automatic cleaning of filter bags and higher efficiency due to high air to clock ratio. It is offered by us in ample of designs that can also be customized as per the laid demands of the buyers. It is widely used for the recovery of fine flour from the pneumatic conveying system and recovery of fine dust from the dust aspiration system.

• Brand Name: ROBOT
• Model Number: JCB 3D/3DX

Our Element Oil Filter is highly preferred in the spare part after market. Robot Components pvt ltd is a world class and leading maufacturer, supplier and exporter of earthmoving machinery spare part.

• Efficiency: 90%
• Frame: Cardboard
• Type: Motorcycle Air Filter
• Shape: Round
• Color: Yellow
• Size: Standard
• Feature: Best Grade Material,Durable,Easy To Install,Gud Quality,Perfect Finish
• Brand Name: Bestech auto industries

• Brand Name: Siddhivinayak Envirotech
• Material: PP
• Application: Chemical Industry
• Frequency: 50 Hz
• Voltage: 220 V
• Country of Origin: Made in India
• Flow Rate: 75 Litre/min
• Horsepower: 1 HP
• Power Source: Electric

By making use of streamlined packing system, we become capable of meeting the bulk and customized packing requirements of the clients. Moreover, we ensure complete safety of the orders. Maintaining the set industrial standards, we make sure that the range is as per the requirements.

Speed: – 300 pouches/minute approx for  weight 0.35 gms, (depending on flow rate of snus & size of pouch. And moisture content in the product) Moisture up to 32.5% PLC Mitsubishi Japan HMI Mitsubishi Japan

The Bag Filter Systems are basically used to remove particulate materials from form the process and also general ventilation air so that valuable products can be recovered. The Air Bag Filters offered by us are of the sophisticated types and hence are very much performance oriented. We are a globally acclaimed Manufacturer and Exporter of Bag Filters in India. INLET CHOICES The bag house collector design / offers either top entry or hopper entry to meet the needs of your applications. For fine dust with low dust concentrations and with higher air-to-fabric ratios, top entry is more suitable. Top entry generates a down flow of air throughout the collector, due to which it aids the movement of particles towards the hopper. In case of course dust and high dust loads, hopper entry is preferred. Heavy particles naturally gravitate to the hopper. PULSE-JET CLEANING The filter bags in the collector are continuously cleaned with pulses of compressed air which are initiated by an electronic sequential timer. Small volumes of high pressure compressed air are directed from a reservoir tank through solenoid valves and nozzles. As the burst of air passes through the venturi at the top of each bag, it induces a larger volume of additional air into the clean face side of the bag, inflating the fabric bag and breaking the dust layer on the outer face of the bag. The fabric gets a secondary cleaning as the pulse bounces back up the bag. Pulse-jet cleaning provides an effective means of reconditioning the fabric without interrupting the normal airflow through the filter system. Since the pulse-jet collectors operate at higher filtering velocities than the corresponding fabric collectors which are cleaned either by mechanical shaking or low pressure reverse air. CONVENIENT BAG REMOVAL In most of the conventional bag filter systems filter bags are removed from the top side, which means first the top assembly, including venturies, etc., has to be opened or dismantled, and then each bag has to be lifted up. The operation requires several persons working for several days. Moreover, the user has to ensure that the height of the ceiling should be at least double the height of the bag filter system. Pulsejet filter from CLEAR IONS are designed in such a way that the bags can be removed from the side panels of the collector, without having to dismantle any part, which means that the bags can be removed by a single person in a matter of a few minutes. PRESSURE-DROP ACROSS THE COLLECTOR Since the bags are continously cleaned the pressure drop is very low and almost constant. Though the pressure drop will depend upon factors like air-to-fabric ratio, temperature of air, dust loading, finess of dust, etc., normally it will range between 75 to 150 mm WG. COMPRESSED AIR REQUIREMENT Bag filter collectors are designed for optimal use of compressed air for bag cleaning. The actual air consumption will depend upon various parameters of the final applications, such as dust loading, air-to-fabric ratio, type of filter media used, etc. MATERIAL OF CONSTRUCTION The standard material used for the construction of Pulsejet Bag Filter is mild steel treated for rust prevention, double coated with red oxide primer and painted in color of your choice. Special materials of construction like SS/ PVC/ FRP lined can be used to meet the application requirements. SUPPORT STRUCTURE The system is built with self-supporting strong structure out of steel sections. The ground clearance under the hopper outlet flange, is kept around 1000 mm, though it can be designed to provide any clearance as per your requirements. FILTER MEDIA For general applications heavyweight "Non-woven, needled, felt media" is used for high collection efficiency and long life. Felts with special surface finishes to suit physical and chemical nature of the the dust to be handled and humidity and temperature of the air, are also to look upon. EXPLOSION VENTS Explosion vents, to prevent loss due to explosion accidents, are fitted as a standard. While requesting for a quote, please indicate the following: Air handling capacity required Volume of fluegases Dust loading capacity required Type and fineness of dust to be handled Inlet temprature of Dust / gases Layout plan showing smoke / Dust / Gases Generating machine Area allocated for Air pollution system control

• Features: High filtration efficiency , Anti-static filter media

With firm commitment to quality, our organization is engrossed in offering a wide range of Reverse Jet Filter. The provided filter is used to provide high quality filtration of the conveying air, providing continuous operation. The offered filter is manufactured with the use of superior quality components and highly advanced techniques as per international quality standards. In addition, our clients can purchase this Reverse Jet Filter at the most competitive prices from us.

We offer a high quality range of Submicron Filters to customers all over India. The offered Submicron Filters works on the principle of coalescing. It offers high performance and is highly durable. It is easy to install and requires low maintenance. We procure our submicron Filters from trusted sources. Our product is tested stringently by our expert’s before delivering them to our valuable customers. Contact us for more details.Features : Oil Removal (Coalescing) and Particulate Flow from 60 cfm to 1065 cfm Particle Removal 0.01 (μm) Max. Oil carryover 0.003 (mg/m3)

Filter Set with Base & Filters.

• Country of Origin: Made in India
• Filter Medium Material: Fiberglass
• Diameter: 0-1 inch
• Usage/Application: Air Filter
• Shape: Sqaure
• Brand: Thermadyne
•  :  

• Features: Easy operations, Sturdy design, Longer functional life

Air Compressor, Air Dryer , Vacuum Pump ,Air Dryer. Air Filter and spares all type local compressor sales and servies

Industrial Filter, aluminium reflectors, die casting alloys

Coalescing Filters, pipeline filters, air filter parts, filter components

lpg filters, Cng, lpg sequentail reducers, Sensors

Swimming Pool Filters, Sewage Water Treatment Plant

automobile air filters, Filter Paper, CRC Sheets, Rubber Gaskets

car air filters, Filter Plate, Filter Accessories

filtration, Lubricants, COOLANT, gasket maker, auto air conditioning

Filter Press, waste water recycling plant