LAB TIGER Dlf Industrial Area, Faridabad, Haryana

The tensile testing machine is extensively used to determine the tensile strength of various products and materials in different production verticals. The test relies on the principle of CRT, i.e. Constant Rate of Traverse. The instrument is highly stable as it designed using heavy mild steel. The high-quality instrument ensures various safety measures like overload and over travel protection. Tensile Testing Machine is available in three different models - Digital Model,Zeus Ultimo and Digital cum Computerized (Eco) Wintest Model with customized specifications.   The testing apparatus is incorporated with latest technology based components to apply an assortment of tensile strength. The machine is equipped with two clamps, known as an upper clamp and lower clamp. To perform the test, the upper clamp is set to be unchanging, and the lower clamp moves with the nominated speed, which moves with the help of a motor, duly attached to the machine. Here, the lower clamp is installed mainly to move the jaw with a constant speed to estimate its tensile strength. The amazing and most useful creation ensures effortless, safe and problem-free operations.   Features:   It is manufactured using high quality heavy-duty mild steel for better stability and  higher strength. There are many safety measures included in the machine such as overload and over travel protection. A standard motor of branded quality and CE certified wiring is used in the machine. The modular design of the machine ensures better and trouble free maintenance. The machine has a rust free and elegant finish. The machine is available complete along with micro switches, main switch, and other essential accessories along with an instruction guide. The machine is highly safe and has simple operations. The maximum capacity of the instrument is 10- 250Kg which offers a least count of 1 gm to 100 gm respectively. The device is incorporated with single phase induction motor of 1/4 HP and 1440 RPM. The instrument consumes 0.18 KW power. The motor of the instrument is Worm Reduction Type. The digital model offers the travel length from 25mm to 700mm. The instrument is coated with Gray and Blue combination along with bright chrome and zinc plating to provide a corrosion resistant finish.

Salt Spray Chamber – Korrox III is a touch screen model. It is a very useful laboratory instrument which is used to determine the resistance of materials to corrosion and the effects of other environmental factors on a material before commencing the manufacturing procedure to produce best quality product. Plating on a product is done to save a product from rust and to enhance its life. To test the quality of plating that enhances the life of a product, salt spray chambers are introduced. The testing apparatus is designed and manufactured as per standard test methods to  identify the effectiveness of resistive properties of a material against rust under different climatic conditions. Other models of Salt Spray Chamber are also available - CASS cum salt spray chamber and Salt Spray Eco model with customized specifications.   Salt Spray Chamber Korrox III comprises of a touch screen temperature control panel on the right side of the instrument  which helps the user to set the desired temperature easily. The cabinet of the instrument is designed with double walled reinforced fiber plastic  duly filled with  glass wool insulation. This insulation protects the chamber from corrosive environment which is created in the chamber to test the specimen.  The testing instrument is provided with some standard accessories like air purging, cyclic timer, regulator, gauges, time totaliser and racks to place the specimens. The lab testing equipment complies with ASTM B117; IS: 6910; JIS Z2371; IS: 5528; DIN50021; ISO 3768.   Features:   The chamber of the machine has a double wall and has glass wool insulation so that any deformation could be resisted. There is a jar placed outside the machine for the collection of the salt solution. A high pressure drum is also provided with the machine. The pressure that comes with the instrument has a range of 0 to 30 PSI and has an air regulator along with an air filter. Comes with a digital controller for temperature. The temperature is easily regulated through the touch screen control panel.  Touch screen feature 7 (480*234) 16.9 TFT LCD with around 65536 colors. USB host for flash memory drive. \USB 1.1 for fast transfer of data. Function keys. ARM9 32 bit CPU Complaint with IP 65 having 480*234 pixels 3 MB flash memory. 256K bytes SRAM. Specification:   The temperature range that can be set with this equipment lies from ambient to 600C. The accuracy of temperature obtained from the equipment is ±10C. A digital temperature controller with programmable features is provided with the instrument along with a zero corrosion sensor naked PT 100. There is also a pressure gauge with a range of 0 to 30 psi is also provided with the instrument. 

The melt flow index tester (Deluxe Model) is a significant attribute of any plastic material that can help in determining various chemical and physical properties of the materials. The melt flow index tester is a highly precise and accurate instrument that offers exact and accurate determination of melt flow index of a plastic resin. The melt flow index of a plastic resin is termed as the weight of the resin flowing through a capillary tube every ten minutes under an unambiguous load or shear stress. The test procedure includes passing the molten plastic granules from a capillary tube of specific dimensions. A specified load is applied to the test sample with the help of a piston. Apart from that the following are also available for the customers - Melt Flow Index NXG Model.   The melt flow index tester is used for determination of the melt flow rate of various materials such as plastic granules. It is a widely used product in plastics and polymer industry. The instrument is designed and manufactured as per standards set by ISO and ASTM and is mainly focused on meeting the principal conditions necessary for the test procedure. The instrument has a PID temperature controller, and its working is based on a microprocessor. The temperature can vary from ambient to 4000C. The resolution of the instrument is also 0.10C and has an accuracy of ±0.10C. The apparatus comes with a digital timer that is pre-settable and can be extended to 59 minutes and 59 seconds. There are standards accessories available with the devices that are a piston, orifice, spanner, funnel, spoon, mirror, plumb line, material charger, barrel cleaners and so forth. The machine is manufactured on a base plate of heavy metal for long life, safety and stability. The tester is in strict adherence to standards of ASTM D 1238-1992. The instrument has a fine finish in grey and blue color. The product comes with a complete user guide and a conformance certificate that can easily be traced to any labs approved by NABL.    Features:   The instrument is capable of maintaining the accurate temperature needed for the test procedure that ranges from ambient to 400 0C. The temperature controller used in the machine is PID which is a completely microprocessor based. The machine has a high rate of accuracy and repeatability and incorporates a pre-settable timer. The instrument has a feature to cut the test samples automatically which makes the results reliable and test procedure easy. Additionally, the standard accessories and resources are available with the product.   

A hot air oven is widely used  lab testing instrument that is used for sterilization of tools and equipment used in different laboratories. It uses dry heat for the purpose of cleansing. The hot air oven works on electrical supply and is provided with a fan that ensures that there is a uniform flow of heat and hot air inside the chamber. Normally, the requirement of temperature for the best level of sterilization is 1600C/hr. The oven is provided with high-quality insulation with high-quality glass wool and is meant to satisfy all the industrial requirements.   With the utilization of forced air circulation, hot air ovens are used for assessment of the effect of the aging process of different properties of the products. The physical properties of the material being tested are checked before and after the aging process for best assessment.   There are two models of hot air ovens available, namely, Digital model and computerized model.   The hot air oven is a chamber with double walls. The inner walls are made from heavy gauge stainless steel and the outer walls are fabricated from mild steel of high quality. In between the walls, glass wool insulation is provided for prevention of any heat loss to the environment. The heaters are mounted on the ribs at the bottom, and the sides of the chamber. It is also provided with a circulation fan for uniform circulation along with a hot air blower which ensures constant maintenance of required temperature inside the chamber. A port is installed inside the chamber with its openings outside. This port is used for installing the sensor. The port is also used for changing of air. The control panel that is provided at the right side of the machine aids in visual monitoring of testing procedure.  There are stainless steel trays provided with the machine that can be used for placing test specimen.    Features:   The instrument is provided with double walled chamber that is thermostatically controlled. There are beaded elements places below the ribs and at the bottom of the machine. The machine has a powder coated finish that makes it corrosion resistant.  Specification:   The dimension of the cabinet of the oven is given as 18 x 18 x 18 inches. Customers can also request other dimensions for oven chambers. The temperature range that can be set inside the chamber is from ambient to 2500C. The power supply required to operate the instrument is single phase AC of 230 V, 50 Hz. The dimension of the whole machine can be given as 88 cm x 80 cm x 67 cm. The machine has an approximate weight of 64kg. The machine is provided with a PID controller for better control on the temperature and has a dual display of actual value and set value.   

An edge crush tester is an ideal testing instrument that is used for creating testing environments and is used widely in industries such packaging, quality assurance and so forth. The instrument is very useful in determination compressive strength of the sides of solid boxes of fiber as well as corrugated boxes. It is best for performing Edge crush test, flat crush test and ring crush test according to the standards. The testing instrument is specially designed as a table top model and is very user friendly. Apart from that the following are also available for the customers - Crush Tester (RCT/ECT/FCT)-Computerised Cum Digital   The crushing strength of a box is measured as KN per unit length. Edge crush test value is greatly dependent on the bonding of the paste. Higher value of edge crushing force depicts that the box has a high stiffness level. This allows comparing the quality and strength of corrugated boxes. With the ECT, it is possible to find the compressive strength for the box with the use of McKee’s formula which is given by the following equation.   Features:   The test results can be read simple and accurately with the help of a digital display. The force applied by the machine is measured electronically with the help of a load cell. The loading system is electromechanical which assists in easy loading and unloading of the test specimen. The electronic controls of the machine are very easy to operate and use. There is peak-hold function provided with machines for better competence.  Specification:   The machine comes with a maximum capacity of 100kilogram force. The instrument has a least count of 100g. The accuracy of the instrument is ±1%. The Rate of the machine to perform the test is 12.5 ±2.5 mm/min. The design of the machine completely complies with the standards set by IS: 7063. The machine comes with dimensions as follows:  L 60cm x W 50cm x H 125cm. The unit used for determination of crush resistance is Kilograms per unit length. There is a rigid metal plate given with the instrument and has a finish of autumn grey and blue color. There is a requirement of 220V single phase AC to operate the instrument. The weight of instrument is approximately 93 Kg and it comes with a user manual and a calibration certificate which can be traced to NABL approved labs.   

The carbon black content in any product is determined using the carbon black content apparatus. It is used on products like polyethylene and other plastic products. The test conducted by this apparatus is meant to detect the amount of carbon present in the material in its free state. The instrument is widely used in plastic and PET industries.   Carbon black content apparatus is used to determine the percentage of carbon black content in polyethylene and other plastic materials. The test is performed on the materials in which carbon is presented in a free state. As per the standard test methods, the percentage of carbon content in samples is measured by calculating the difference in the mass of test sample before and after the test procedure takes place in the machine. The laboratory test machine is designed and manufactured keeping in mind certain test methods like IS2530, IS 4984 and ASTM D-1603 to determine the content of plastics.  The test procedure is very important and protective to perform. It is widely used to check the efficiency of polyethylene materials. It helps to determine the test specimen in a static atmosphere in accordance with its gravimetric difference. The glass of the lab instrument is designed and constructed using a high–quality alloy to maintain the untimely fusions. The temperature of the machine is controlled by built-in electronic controllers to avoid practically for better temperature stability.  Carbon Black Content Apparatus is equipped with a tubular furnace made up of mild steel material. The temperature range of the furnace can be set maximum up to 1150 C. The relatively low wattage of the heater implicates the durability and long life of the furnace. Moreover, it is designed with a PID controller that drive the temperature in the allowable limits of +/-5. The apparatus is incorporated with a nitrogen flow meter along with the set of glass parts. Apart from this, there are two flasks that firmly hold the solid ice. The machine is supplied along with the combustion boat and tubes which are made of quartz glass. The properties of quartz glass is much better than borosil glass that easily bear the temperature   Features:   Provided with two separate glass flasks. The instrument is equipped with a programmable P.I.D. Controller. It is designed with quartz glass that resist high temperature. Low operating voltage ensures the longevity of the furnace. Specification:   Furnace Size is 6” x 6”x 6”. The temperature range is from ambient to 1150°C. Inner body is constructed with Stainless Steel and the outer body is constructed with Mild Steel duly coated with powder finish. Additional accessories are provided with the machine like Desiccators, Glass U Tube, Combustion tube, Rubber tube – 1 no., Rotometer, Combustion boat, Glass traps – 3nos., Glass end caps 2 nos. Operated on the power supply of Single phase, 230V and 50 Hz.  

The bursting strength tester Analogue model is a highly preferred tool for testing the bursting strength of various packaging materials such as filter cloth, uneven boxes and boards, industrial fabric, solid boards of fibers, paper boards, leather, Rexene, plastic films, and sheets. The bursting strength test helps in estimation of the quality of the materials and compares it with other similar materials. The bursting strength of the materials is tested against a specific amount of hydraulic pressure applied on the materials. Other models of this instruments are also available that are as follows - Digital Model, Pneumatic Model, Computerized Cum Digital Model with Manual Clamping,  Computerized Cum Digital Model with Pneumatic Clamping   It is a reliable index for measuring the strength of various materials and packaging products. The equipment is an ideal lab testing instrument to test the materials for their strength, performance and quality. The machine offers high ease of operation. The instrument is properly calibrated for reliable and accurate results. It is used widely in many industries, education institutions, laboratories etc. There are two clamps present in the machine that are lower clamp and upper clamp. The test specimen is basically placed between both the clamps for strong hold. Adequate amount of pressure is applied on the specimen to avoid any slippage. The upper clamp has spiral grooves and the lower clamp has concentric grooves. The strength of the material is measured using the testing instrument in two ways that are manual exertion of pressure and automatic exertion of pressure through rubber structure. The area of application of pressure is circular in shape. When there is application of force, the specimen collapses along with diaphragm. In this way the bursting strength of the material is duly calculated according to the maximum pressure required to be applied on the material for failure. The pressure applied is measured using a Pressure gauge. Output   The strength calculated through this procedure is used to calculate the maximum weight that the material can bear before failure. This helps the engineers in deciding the factor of safety for the material. The results can be easily viewed and assessed in analogue meters, digital screens and in form of graphs of computer screen.   Features:   Easy installation High accuracy for calculation of bursting strength of a material. Highly useful for enhancement of the performance of the products. Easy calibration is possible. Specification:   The instrument is available with an analogue gauge. There are two clamps provided with the equipment that are upper and lower clamps with a diameter of 30.5 mm and 38.1 mm respectively. The fluid in the instrument dis-articulates at a rate of 95cc/minute. With this instrument a pressure of 35 kg per square centimeter can be applied on the specimen for measurement of bursting power. The test fluid that is used in the instrument for creating pressure is glycerin oil. There is a reduction type worm wheel gear box provided with the instrument. The power needed to operate the instrument is ½ KW and has a motor of ½ HP single phase. Related standards- IS1060 Part-I 1987. There is stiff base plate of metal used for assembly of the instrument and is given a nice appearance with autumn grey and blue color. The Equipment is provided with chrome plating for protection from rust. The equipment comes with an instruction manual, NABL certificates and spare diaphragms. 

Box Compression Tester Digital Model is used to measure the compression potency, strength or stacking power of beehive crates, cartons, corrugated boxes, paper cases, paper tanks, etc. The tester is a well-engineered apparatus, designed especially to calculate the load range a box or a carton can bear till complete failure. With this highly accurate and stable testing equipment, it becomes very easy to ensure the highest strength of the corrugated boxes and other packaging materials provided to your customers. Apart from digital model acomputerized cum digital model of box compression tester is also available for customers.    Box Compression Tester is used to measure the compression potency, strength or stacking power of beehive crates, cartons, corrugated boxes, paper cases, paper tanks, etc. The Box compression tester is a well-engineered apparatus, designed especially to calculate the load range a box or a carton can bear till complete failure. In this procedure, weight of specific range is chosen to completely crush the specimen in a set time period to measure the maximum stacking load. It is a solid instrument which requires sufficient space in a laboratory to place with user-friendly controls. Cardboard boxes must have sufficient compression strength so that they do not get crushed when stack one above the other at the time of transportation or storage. The compression strength of a carton is gauged simply by placing a test specimen say, corrugated box or carton between two parallel plates. Now set the compression strength and the standard time period from the digital panel to compress the specimen.Two models of Box Compression Tester are available, namely Digital and Computerized cum Digital Model. At the time of storage or transportation, cartons and corrugated boxes were placed one above the other which leads to compression. To ensure the safety of the products kept inside the cartons, it is quite important to measure the quality and the compression strength of corrugated boxes. This development toward enhancing the quality of packaging has now-a-days, contributed a lot to safeguard the products during transportation and storage because the concept of plastic wrapping has completely removed. The compression strength of a product is determined by a number of factors: Size and Measurement of the cartons Depends on the storage techniques like stacking and various circumstances like climate, etc. Material Properties of an object includes stiffness and compression strength. The compression strength is measured in the following units: N, lbf or kgf. It has Digital display. It is operated on a single phase. It is solid model, light in weight, appropriate for stable performance. Highly Stable - Designed on heavy duty iron plates. Heavy duty assembly with two columns. Podium size of the machine is 600mm x 600mm to place the specimen safely. Maximum weight that can be exerted on a box can be of 1000kg. The least count of the instrument is 500g. The power supply required to operate the apparatus is 2.5KW The plate of the apparatus moves towards the specimen at a rate of 10+/- 3 mm per minute (where, the HOME location speed is 2” per minute). It is incorporated with a motor of 3 HP which operates on a 3 phase power supply. It is built-up on a rigid metal base plate. The machine is coated with autumn gray and blue combination paint along with bright zinc plating which provides a rust resistant finish. The testing instrument supplied complete with an Instruction Guide and Electrical Wiring Diagram & along with Calibration Certificate perceptible to NABL approved Labs. Standard: ASTM, IS, ISO, TAPPI, JIS.

The touch screen model of Bottle burst tester is an upgraded version of the digital model that is widely used in the industries where PET bottle is used for packaging of highly pressurized aerated drinks. The touch screen model provides highly accurate and reliable test results of the bursting strength of a PET bottle. THE instrument is best for use in bottling plants of aerated and carbonated drinks as well the PET bottles manufacturing plants. Along with the touch screen model, the bottle burst tester is also available in digital model.   The bottle bursting tester is a widely used testing instrument that is meant for testing the strength of bottles to bear the pressure exerted on then when they are filled with aerated drinks or carbonated drinks. The instrument gives an exact measure of the volume extension and burst strength of the bottles that are used for packaging. It is a highly useful instrument for PET manufacturing industries to check the quality of their products. The instrument is provided with a highly advanced touch screen which makes it highly easy to use. Along with that, touch screen also helps in obtaining highly accurate and reliable results with high rate of repeatability. The instrument is equipped with pneumatic controls along with a buzzing alarm which intimidates the completion of every test procedure every time. The high end computer software provided with the instrument allows the instrument to integrate a computer for extension of more functions. With the USB data interface, the test reports can be easily transferred to the computer for easy viewing.   Features:   The instrument offers automatic hold and release function which holds and releases the test sample automatically. It allows accessing the history of the test conducted. Pressure can be adjusted automatically and very easily with the use of HMI touch screen. The touch screen model also provides you the test results in graphical format. The machine has self-calibration facility. It comes with a USB 1.1 data interface which helps in easy transfer of data from the machine to other devices. There is an auto buzzer provided with the machine which buzzes every time after the test completes. It is incorporated with an 8” HMI touch screen with 65536 colors. The touch screen is I complete compliance with Nema4, IP65 standards, CE and UL approved.  Specifications:   The equipment is best for getting information about the expansion volume and burst pressure of bottles used in industries. It is incorporated with a touch screen along Human Machine Interface. The equipment has pneumatic controls for easy operation. It also has the automatic alarm which buzzes after every test procedure is completed. The machine also has a feature to set fixed pressure where the desired pressure can be achieved in a very short time. RAMP rate software is also provided with the machine along with its hardware.