Laboratory Apparatus Dealers in Dlf Industrial Area, Faridabad

• Power Supply: Single Phase 220-240V AC, 50Hz.
• Specifications / Model: Digital
• Display: Digital LED
•  :  
• No. of Stations: Six
• Material of Construction: Inner bath: Stainless Steel
• Outer Body: Mild Steel duly powder coated
• Accessories: Cutting die, Nicking jig, Bending cum transfer tool and Aluminium foil – 1 no. each. Specimen holder, Test tube, and Rubber cork – 6 nos. each
• Paint: Mild steel Powder coated Havell Gray & Blue combination finish and bright chrome / zinc plating
• Control Method: Temp. Controller Digital
• Industry: Plastic

The carbon black content in any product is determined using the carbon black content apparatus. It is used on products like polyethylene and other plastic products. The test conducted by this apparatus is meant to detect the amount of carbon present in the material in its free state. The instrument is widely used in plastic and PET industries.   Carbon black content apparatus is used to determine the percentage of carbon black content in polyethylene and other plastic materials. The test is performed on the materials in which carbon is presented in a free state. As per the standard test methods, the percentage of carbon content in samples is measured by calculating the difference in the mass of test sample before and after the test procedure takes place in the machine. The laboratory test machine is designed and manufactured keeping in mind certain test methods like IS2530, IS 4984 and ASTM D-1603 to determine the content of plastics.  The test procedure is very important and protective to perform. It is widely used to check the efficiency of polyethylene materials. It helps to determine the test specimen in a static atmosphere in accordance with its gravimetric difference. The glass of the lab instrument is designed and constructed using a high–quality alloy to maintain the untimely fusions. The temperature of the machine is controlled by built-in electronic controllers to avoid practically for better temperature stability.  Carbon Black Content Apparatus is equipped with a tubular furnace made up of mild steel material. The temperature range of the furnace can be set maximum up to 1150 C. The relatively low wattage of the heater implicates the durability and long life of the furnace. Moreover, it is designed with a PID controller that drive the temperature in the allowable limits of +/-5. The apparatus is incorporated with a nitrogen flow meter along with the set of glass parts. Apart from this, there are two flasks that firmly hold the solid ice. The machine is supplied along with the combustion boat and tubes which are made of quartz glass. The properties of quartz glass is much better than borosil glass that easily bear the temperature   Features:   Provided with two separate glass flasks. The instrument is equipped with a programmable P.I.D. Controller. It is designed with quartz glass that resist high temperature. Low operating voltage ensures the longevity of the furnace. Specification:   Furnace Size is 6” x 6”x 6”. The temperature range is from ambient to 1150°C. Inner body is constructed with Stainless Steel and the outer body is constructed with Mild Steel duly coated with powder finish. Additional accessories are provided with the machine like Desiccators, Glass U Tube, Combustion tube, Rubber tube – 1 no., Rotometer, Combustion boat, Glass traps – 3nos., Glass end caps 2 nos. Operated on the power supply of Single phase, 230V and 50 Hz.  

• Power Supply: Single Phase 220-240V AC, 50Hz.
• Control Method: Temp. Controller Digital
• Temp. Range: From ambient to 1150 ° C

Carbon black content apparatus is widely used for concluding the carbon black content in polypropylene and polyethylene materials. The test is applicable only to specimens where carbon is present in a free state. As per the standards, the carbon black content in the samples is calculated by measuring the difference in the mass of the sample after and before the procedure takes place in the apparatus. The laboratory instrument is designed as per IS 4984, ASTM D-1603 and IS 2530 standards to determine the content of plastics.

Compression set of Rubber components is defined as the difference between the original thickness of a test specimen taken either from the component or moulded from the compound from which the component is to be moulded and that after compression and subsequent recovery, expressed as percentage of the initially applied compression. It to retain its elastic property after prolonged compression. The compression set may be determined after subjecting the test specimen either to a constant deflection or pressing it under a constant load. Compression set under constant deflection is determined by subjecting a cylindrical disc shaped test specimen to a fixed strain for a specified time at either room temperature or any other specified temperature, and then allowing it to recover for a given time. The “PRESTO” Compression Set Apparatus for determination of compression set under constant strain consists of four steel plates having flat and parallel ground faces. The plates are held together by a pair of allen bolts. Ring shaped spacers of specified thickness made of magnetic stainless steel are provided to give the desired compression to the test specimens. The apparatus may be kept inside a hot air oven for conducting the test at elevated temperatures.

• Type: Cod Digester
• Application: Laboratory Use
• Feature: Great Performance Compact Style, High Quality, Reliable, Good Quality, Easy To Use
• Color: Creamy, White
• Display: Digital
• Drtiven Type: Electrical

Medical Devices