Environmental Monitoring System Dealers

Compliance with strict regulatory guidelines and quality requirement demands accurate measurement, secure data, comprehensive reporting and alarms notification unlike any other product. NECLOG provides variety of physical parameter to be logged, reported and alarm notification. Temperature, Humidity, Differential pressure, CO2 etc. Neclog is one of the unique solution with many advantages as easy-to-use, cost effective, high-accuracy solution for mapping critical and FDA-regulated environments form stability chambers to freezers and warehouses. Simple configuration and connection of multiple sensors on serial link makes it easy to use and hassle free. On line data on base unit and on PC allows to track performance in real time.

• Standards: IEC 61672, Class 1,
• Frequency weighting:: A, C,
• Time weighting:: Fast, Slow, Impulse
• Measured data: SPL, Leq, Lmax, Lmin, Lpeak, Ln and other parameters

Envirotech’s Noise Monitoring Terminal is optimized for outdoor use and can be left unattended as part of an environmental noise monitoring system for mobile, permanent and semi-permanent monitoring. It can be used in all climatic environments and is especially suitable for industrial, city and field use. The terminal consists of a weather proof cabinet, special outdoor microphone, data logger, a GPRS modem and a battery. The terminal can be mounted on a mast or a pole and can also be powered by a solar panel for smooth operation in harsh Indian conditions. State of the art software is provided to control the terminal remotely from a central receiving station via GPRSEDGE3G. Post processing software for report preparation and data analysis is also included. Real time data can be made available on a website or shown on a display board as required.

The Integrated Environmental Monitoring System (IEMS) is a distributed open-architecture system designed to provide a complete and singular solution for monitoring all of the environmental parameters required by the GMPs and ISO Standards: Room and building environment Continuous airborne particulate Airborne viable particulate

• Nature: Prevention

arnowa’s forest monitoring system uses a variety of smart sensors and camera to monitor environmental parameter, fire presence, pest infestation, animal movement and soil health.  the sensor output is tirelessly interrogated and modelled by cutting-edge data, image and video analytics.  artificial intelligence (ai) and machine learning (ml) continually optimise these models, facilitating the immediate detection of detrimental events such as forest fires and illegal logging. real-time alerts are delivered to authorities, enabling rapid response and minimising the risk of forest destruction. it can be used in known fire risk localities, areas suspected of illegal logging activity, national parks, forests and animal corridors.   our wetland management solution ~ “jeewan” consists of multi-parameter sensors for water quality (such as ph, turbidity, tds, etc.), connected to the wireless data transfer protocol through the arnowa nodes. our edge and cloud computing then processes this data and builds models based on big-data analytics, ai, and machine learning to predict the future trend of the water quality, helping prepare stakeholders for suitable action and empower decision making so that water pollution can be prevented.

This is a our unique area radiation monitoring system which can be used to monitor radiation level of public places and radiation fields. The system consists ofa monitor and several detectors Monitor collects and analyses radiation rate data from different detectors. The status and alarm information will be transmitted to the computer. Monitor, detectors and computer connected via RS485 data transmission network. Each monitor can be connected to as many as 128 detectors and maximum transmission distance is 1000 meters. We Offered in a wide range of measurement ranges, our area radiation monitors provide real-time remote radiological measurement. Featuring waterproof probes and a with available cables anywhere from 25 to 350 feet in length, they can safely measure in areas where high radiation could otherwise compromise meter electronics. Features: Optional monitor and detector based on radiation level an customer demand. Optional 6LiI(Eu) neutron detector. screen LCD, user friendly. Independently adjustable alarm threshold for each detector. Visual and audible alarm.

• Working Range: -20…+80ºC
• • Accuracy: ± 0.3ºC in the range 0…+70ºC
• ± 0.4ºC outside this range:  
• Humidity:  
• • %RH working Range: 5…98%RH
• • Accuracy: ± 2.5%RH
• Pressure:  
• • Working Range: 600…1100mbar…1100hPa-60.0…110.0kPa
• • Accuracy: ± 0.5mbar @ 25ºC
• • Analog Output: 4

The aim of the project ENVIRONMENTAL PARAMETERS MONITORING THROUGH VOICE is to design a system using which various physical parameters like light, temperature, humidity and fire of environment can be monitored through a PC using the microcontroller 8051 and a font end software C# .NET. In this competitive world and busy schedule human can’t spare more time to perform daily activities manually. It is very easy to control devices through PC instead of controlling devices manually. To communicate any device to pc needs HyperTerminal which is understand only by technical people. But it is better to have any extra communication in between PC and device. So that we have tool called as “front ends”. These front ends are very good and which are very easy. Non technical people easily interact with device from PC easily. These front end tools are designed by C# .net application. Communication has good visibility and good interaction in front ends (These front ends may vary from project to project). This project is very useful in industries and is designed in such a way that the controller is interfaced to PC using serial communication technique. Serial communication is often used either to control or to receive data from an embedded microprocessor. In serial communication the data is sent as one bit at a time. Serial communication is a form of I/O in which the bits of a byte being transferred appear one after the other in a timed sequence on a single wire. Serial communication is commonly used in applications such as industrial automation systems, scientific analysis and certain consumer products. Here the communication is established between the PC and the controller by a line driver IC max232 which acts as a voltage converter. And the sensors such as humidity sensor, fire sensor and an LDR which detect the humidity, fire and light respectively are interfaced to the controller through the operational amplifier IC LM358. And the temperature sensor will be interfaced to the controller through ADC0804 IC to convert the analog the analog value of temperature to the digital value. So the controller continuously monitors the status of the sensors and sends the related data to the serial port. C# application always interact with serial port and continuously receives the updates from the sensors ,according to that it gives the voice output through the speakers of the PC. This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.   Micro Controller : AT89S52 Crystal : 11.0592 MHz Lcd : HD44780 Ldr Max232 Temperature,Humidity,Fire Sensors Software Requirements Keil Proteus Uc Flash C# Prog Isp

We are one of the goliath remote parameter monitoring system suppliers of the country, pursuing the business of manufacturing remote monitoring system and network remote monitoring system at most competitive prices. Remote Parameter Monitoring System (RPMS) Now a days GSM Technology has got maximum National Network and Data Transmission is also possible through SMS. Through our trials and vast experience in the field of Data Transmission via SMS, it is a reliable communication in case of emergency. And SMS is a matured technology compared to other technology. We can monitor the Health of our costly equipments with periodic intervals and in case of any misbehavior RPMS immediately send the Data. RPMS Software stores the Data of periodic intervals as well as any emergency or panic situation. We can set the lower limit and upper limit of any Parameter and having seven analog channels and seven digital channels. RPMS consists of : 1. GSM Transmitter 2. GSM Receiver 3. PC Software 1.GSM Transmitter :- a)GSM Modem b)Microcontroller c)7 ADC d)7 Digital Inputs 2. GSM Receiver :- A) GSM Modem B) Microcontroller c) PC Interface 3. PC Software :- a) Report of periodic interval. b) Report of emergency. Color Code of Channels : Channel No. : 1 Violet Channel No. : 2 Red Channel No. : 3 Yellow Channel No. : 4 Blue Digital Ch. : 1 Green Digital Ch. : 2 Orange Digital Ch. : 3 Brown Ground : Black Command set of RPMS : 1.To know Hardware ID AQZ#ID 2.To set Time Interval AQZ#T04 ( 04 minute) 3.To set Receiver Number AQZ#N9822088317 ( Set receiver number) 4.To Start AQZ#START 5.To Stop the Transmission AQZ#STOP 6.To Read the current parameter AQZ#READ To set the lower limit and upper limit of any parameter of any channel AQZ#L1L0.8H2.0 (First L1 � Set limit for channel 1) (Second L � To set lower limit) ( H � Upper limit) AQZ#L2L0800.00H2000.0 (First L2 � Set limit for channel 2) (Second L � To set lower limit) ( H � Upper limit) AQZ#L3L0.8H2.0 (First L3 � Set limit for channel 3) (Second L � To set lower limit) ( H � Upper limit) AQZ#L4L150.00H250.00 (First L4 � Set limit for channel 4) (Second L � To set lower limit) ( H � Upper limit)

Envirotech’s Noise Monitoring Terminal is optimized for outdoor use and can be left unattended as part of an environmental noise monitoring system for mobile, permanent and semi-permanent monitoring. It can be used in all climatic environments and is especially suitable for industrial, city and field use. The terminal consists of a weather proof cabinet, special outdoor microphone, data logger, a GPRS modem and a battery. The terminal can be mounted on a mast or a pole and can also be powered by a solar panel for smooth operation in harsh Indian conditions. State of the art software is provided to control the terminal remotely from a central receiving station via GPRS/EDGE/3G. Post processing software for report preparation and data analysis is also included. Real time data can be made available on a website or shown on a display board as required.

• Brand Name: SANSEL
• Model Number: HTP 196
• Packaging Details: Packing & forwarding extra for your accounts
• Place of Origin: Tamil Nadu, India

EMS monitors environmental factors like light, sound, temperature, humidity, power, water leakage, airflow, smoke and much more. It keeps detailed records of those factors with a live video streaming using a high quality camera. EMS display useful information on software interface, which gives operatoruser one stop dashboard with alarming facility in the abnormal condition. EMS prevents calamitous situations resulting from climate and power related issues within monitored environment, this can reduce revenue loss, save guard reputations and prevent life threatening accidents. EMS best suits for the Building Management System, Monitoring data center IT, telecom, healthcare and food storage Industry.

environmental monitoring systems

We Offer Environmental Monitoring System. Please Contact Us.

Environmental Monitoring System, Agricultural Instruments

The Environmental Monitoring System that we make available is designed by our team of professionals having years of experience and in-depth knowledge in this field. The System is made in accordance with the international quality standards. It can efficiently dry contact, monitor temperature, spot leak, door contact, vibration, humidity, and smoke. Our Environmental Monitoring System can be purchased from us at the best market prices.

Warehouse Environmental Monitoring System