Packaging Testing Equipment Dealers in Dlf Industrial Area, Faridabad

• Display: Digital Counter
• No. of Cycles: 0-9999
• Accuracy: ±1%
• Sensor Type: Proximity
• Weight on Sample: 1psi & 2psi (1+1)
• Sample Size: 48mm and 120mm Diameter
• Power Supply: Single Phase 220-240V AC, 50Hz.
• Motor: Single Phase gear motor, HP- 1/4, RPM – 1440
•  :  
• Paint: Mild steel Powder coated Havell Gray & Blue combination finish and bright chrome / zinc plating
• Control Method: Digital Preset Cycle counter
• Sample Type: Labels/Printed Paper/ Stickers
• Industry:  Paper & Packaging

• Machine provides accuracy: +/-1%.

It is an ideal equipment widely used in packaging, paper making, quality inspection and many more. Digital Edge crush tester is a useful instrument for determining the compression strength of solid fibre boxes and corrugated boxes by testing the paper or board used in making such boxes.

An edge crush tester is an ideal testing instrument that is used for creating testing environments and is used widely in industries such packaging, quality assurance and so forth. The instrument is very useful in determination compressive strength of the sides of solid boxes of fiber as well as corrugated boxes. It is best for performing Edge crush test, flat crush test and ring crush test according to the standards. The testing instrument is specially designed as a table top model and is very user friendly. Apart from that the following are also available for the customers - Crush Tester (RCT/ECT/FCT)-Computerised Cum Digital   The crushing strength of a box is measured as KN per unit length. Edge crush test value is greatly dependent on the bonding of the paste. Higher value of edge crushing force depicts that the box has a high stiffness level. This allows comparing the quality and strength of corrugated boxes. With the ECT, it is possible to find the compressive strength for the box with the use of McKee’s formula which is given by the following equation.   Features:   The test results can be read simple and accurately with the help of a digital display. The force applied by the machine is measured electronically with the help of a load cell. The loading system is electromechanical which assists in easy loading and unloading of the test specimen. The electronic controls of the machine are very easy to operate and use. There is peak-hold function provided with machines for better competence.  Specification:   The machine comes with a maximum capacity of 100kilogram force. The instrument has a least count of 100g. The accuracy of the instrument is ±1%. The Rate of the machine to perform the test is 12.5 ±2.5 mm/min. The design of the machine completely complies with the standards set by IS: 7063. The machine comes with dimensions as follows:  L 60cm x W 50cm x H 125cm. The unit used for determination of crush resistance is Kilograms per unit length. There is a rigid metal plate given with the instrument and has a finish of autumn grey and blue color. There is a requirement of 220V single phase AC to operate the instrument. The weight of instrument is approximately 93 Kg and it comes with a user manual and a calibration certificate which can be traced to NABL approved labs.   

Cobb sizing tester is used for fast determination of the quantity of water absorbed by a paper or board in a given time. The Water absorptiveness (Cobb value) of a substance is defined as the mass of water absorbed in a specific time by a 1 sq. meter sample of paper, board or corrugated board, under standardized conditions. Cobb Tester measures the amount of liquid penetration into a sheet of Paper, Cardboard or Corrugated Board. The Cobb sizing Tester consists of a cylindrical container clamped to a flat base with a flexible backing onto which the sample is placed. Cobb sizing tester provides a simple, standardized method for fast determination of the quantity of water absorbed by a paper or board at a given time.

• Accuracy: plus minus 1% within 10% t o 90% of entire range as per IS 1828 with master gauge
• Item Code: PBD-400
• Features: Bright LED display,Calibration facility available,Feather touch controls
• Lease Count: 0.1Kg per cm2
• Brand: PRESTO
• Material: Mild Steel
• Display Type: Digital
• Size: 540x 600x 450 mm
• Pressure Range: 40 Kg/ cm2

• Country of Origin: Made in India
• Body: Metal Finish powder coated
• Dimensions: 370*430*650mm
• Equipment Range: 220 psi
• Test Range: 175 psi
• Accuracy: +-2% at full range

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220V
• Brand: Testronix
• Display Type: Digital

Paper Testing Instruments, Testing Instruments, Paper Packaging Instruments

Packing Testing Instruments Manufacturers, Humidity Test Chambers